Computation of the average power pattern of a reflector antennawith random surface errors and misalignment errors

To specify manufacturing tolerances of a reflector antenna, various errors such as random surface errors and misalignment errors must be considered at one time because superposition of the effects of those errors may not hold. Based on the Rahmat-Samii's formulation (1983), a method for computing efficiently the average power pattern of a reflector antenna with those errors is presented. Simulation results show that superposition of the effects of errors does not generally hold and demonstrate how those errors degrade the peak-gain and sidelobe levels     

Mechanical alloying in the Al-Bi alloy system

Mechanical alloying (MA) was carried out to investigate the MA behaviour of the immiscible Al-10, 30 at % Bi alloys. After the MA processing, the Al and Bi were finely and homogeneously alloyed. The Bi crystallite size decreased to 25 nm and 30 nm in the Al-10 at % Bi and Al-30 at % Bi alloys, respectively. By increasing the MA time, the hardness increased up to a value of 80 H _v, which is larger than that obtained from the rule of mixtures. The lattice parameter of Bi decreased by about 0.27%, which shows the formation of a non-equilibrium hcp Bi super-saturated solid solution. The extended solubility of Al in Bi was 1.9% in the Al-30 at % Bi alloy. Due to the extended solubility, depression of the melting temperature of hcp Bi was confirmed in the mechanically alloyed Al-Bi alloys. The maximum depression in the temperature was about 10 K. The measured values corresponded well with those estimated from the extrapolation of the solidus line.     

Time-varying adaptive filters for evoked potential estimation

Adaptive implementation of an optimal time-varying filter (TVF) for evoked potential (EP) estimation is addressed here. A data-adaptive scheme is used, which converges asymptotically to the optimal TVF solution. Two basic adaptive TVF's (ATVF's) are first introduced, namely least mean square (LMS) ATVF and recursive least-squares (RLS) ATVF. The latter converges much faster than the former. Since the basic ATVF's usually require a relatively large set of response trials to get a meaningful solution, a reduced-order ATVF is further presented and the corresponding LMS and RLS (including a fast RLS) adaptive algorithms are developed. To save memory, a truncated Fourier expansion is suggested to express approximately the time-sequenced weight-vectors of the ATVF's, resulting in a simplified reduced-order ATVF. Finally, extensive simulations are provided to confirm the superior performance of the ATVF's. The present ATVF's can be used as prefilters for latency-corrected average (LCA) processing to obtain more informative estimates of EP signals     

WTG420铁路罐车用钢的组织结构和力学性能分析

分析了ＷＴＧ４２０铁路罐车用钢的组织结构和力学性能。提出了冶炼与轧制的技术关键，其一，添加稀土元素改善钢中夹杂物；其二，采用控轧控冷使铁素体晶粒细化。     

���þ��ܰ�ȫ�Բ�������������

本文通过对在用钻机井架的现场实际测试,建立数据库、测评模型,对实测的数据用计算机技术进行分析,提出了初始弯曲应力;数据正态分布检验——x～2检验;建立回归方程;在给定置信度下测评当前承载能力的技术概念。解决了在用钻机A型井架的安全性评估问题,是一种较为合理、可靠、科学的测评技术和方法。     

The Effects of Fatty Acids and Their Derivatives on the Intestinal Absorption of insulin in Rat

Insulin solution (25 U/ml/kg, pH 8.0) was administered with 50 mM of various C8-Cl8 fatty acid and derivative absorption enhancers to the duodenum, colon and rectum of fasted normal rats under sodium pentobarbital anesthesia. Solutions were administered directly into ligated or sealed intestinal segments. Blood was sampled periodically from the jugular vein and blood glucose levels determined. The maximum decrease in blood glucose level and area under the depression curve were used to estimate bioavailability. Enhancing effects rectally were further investigated in streptozotocin-induced diabetic rats in both the fasted and non-fasted states. Blood glucose levels and serum insulin concentrations were determined.     

利用氧化铁皮烧结矿做炼钢氧化剂的探讨

用氧化铁皮研制烧结放代替铁矿石做炼钢氧化剂经试验表明，其理化性能均优于铁矿石，可替代铁矿石作为炼钢的氧化剂。氧化铁皮的开发利用，综合效益显著。     

Determination of assimilable organic carbon (aoc) in ozonated water with acinetobacter calcoaceticus

The effect of ozone application in drinking water on the production of assimilable organic carbon (AOC) was evaluated. The typical procedure to determine AOC is suggested by van der Kooij, which is the method of bacterial growth measurement by colony‐forming units using the strain P17 and/or NOX. The bacterial indicator species used for this study is Acinetobacter calcoaceticus which was isolated and identified while ozonating Nakdong river water. This strain could never be isolated from the raw water, but this strain was the predominant isolate in the ozonated water. Within a short incubation time, this organism was found to replicate well on acetate and oxalate as the sole carbon sources. The yield coefficients of this organism for acetate and oxalate are the same order of magnitude as the value of P17 and NOX. With full‐scale experiments, A. calcoaceticus concentration was found to increase after ozonation, but did not decrease upon chlorination. In laboratory‐scale experiments with Yongsan river water, aldehyes were found to be produced in proportion to the ozone dose. The raw water contains low concentrations of aldehydes, but has a high AOC concentration. A correlation between aldehyde production and AOC production was observed in the tested water with ozonation.     

Averaged heat transfer during periodic fluctuations of the heat transfer intensity of the surface of a plate,a cylinder,or a sphere

Processes of heat transfer with periodically varying intensity on the surface of heated bodies of three typical geometries (plate, cylinder, sphere) are considered. The true heat transfer coefficient, which varies in time by the law of a periodic step function having two free parameters — amplitude and asymmetry, is specified on the heat transfer surface. Resultant relations are obtained for calculating the experimental heat transfer coefficient, which is the quantity measured in a traditional heat transfer experiment and used in applied calculations.Moscow Power Engineering Institute. Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 68, No. 2, pp. 225–228, March–April, 1995.