深过冷Fe76B12Si12超细晶材料的凝固组织与软磁性能

首次采用深过冷加水淬的方法,成功地制备了直径为16 mm的样品,高为15 mm,组织中颗粒平均尺寸约为120nm左右的Fe76B12Si12合金超细晶材料.其磁损耗P1T400和P1T1000分别为普通硅钢片的40%和65%.系统研究了组织类型及Fe2B(Si)相尺度对该合金软磁性能的影响,发现该合金的最佳软磁性能位于Fe2B(Si)相完全粒化的非规则共晶组织区,并且当Fe2B(Si)相尺寸细化至0.36～0.50μm时,其软磁性能随着相尺寸的减小而大幅度改善.对以上结果产生的原因进行了讨论.     

钢结硬质合金材料的研究进展

介绍了钢结硬质合金的性能特点及制备工艺,简述了近年来在钢结硬质合金领域开展的研究与取得的进展,对钢结硬质合金的应用进行了分类归纳,展望了其发展前景。     

碳化硅晶须双重加热合成的研究

双重加热法是低成本、大批量合成碳化硅晶须的新技术，合成温度低、合成时间短、生成率高。对以炭黑和二氧化硅微粉为原料、用双重加热法合成碳化硅晶须的工艺过程进行了研究。观察了不同合成时间、合成温度和催化剂条件下的碳化硅晶须，揭示出不同工艺参数对合成的碳化硅晶须的产出率，微观形貌、直径和长度范围的影响。结果表明，催化剂的使用可以加快反应速度，提高碳化硅晶须的生成率，合成过程为VLS。实验中初步得到的最佳经济工艺参数为：Fe2O3的用量为2％，合成时间为1．5h，合成温度为1250℃。此时的该工艺条件下碳化硅晶须的生成率可达80％，晶须平均直径为0．6μm，平均长度为30μm。     

在纳米压入仪上进行悬臂梁法测量弹性模量的影响因素分析

对在纳米压入仪上进行悬臂梁法测量弹性模量的主要影响因素进行了综合分析,主要包括加载系统悬置弹簧刚度、压头压入、梁沿截面宽度方向挠曲、梁支座附加挠曲等影响。在考虑这些因素的基础上,得到了悬臂梁的有效挠度,利用有效挠度与载荷之间的关系,评价悬臂梁材料的弹性模量。对单晶硅(100)悬臂梁试样进行了实验,得到其弹性模量为155GPa±9.5%GPa,与参考文献值符合较好。表明在纳米压入仪上进行悬臂梁法测量,只有综合这些影响因素后,才能获得有效、准确的弹性模量测量结果。     

Effect of temperature on anodic behavior of 13Cr martensitic steel in CO2 environment

The corrosion behavior of 13Cr martensitic stainless steel in a CO₂ environment in a stimulated oilfield was studied with potentiodynamic polarization and the impedance spectra technique. The results showed that the microstructure of the surface scale clearly changed with temperature. This decreased the sensitivity of pitting corrosion and increased the tendency toward general (or uniform) corrosion. The capacitance, the charge transfer resistance, and the polarization resistance of the corrosion product scale decrease with increasing temperature from 90 to 120 °C, and thus the corrosion is a thermal activation controlled process. Charge transfer through the scale is difficult and the corrosion is controlled by a diffusion process at a temperature of 150 °C. Resistance charge transfer through the corrosion product layer is higher than that in the passive film.     

逆向工程技术在复杂铸造模具制造中的应用

首先介绍了逆向工程技术与传统制造技术的区别,然后着重讨论利用逆向工程技术快速制造复杂铸造模具的过程及工艺路线,同时给出一些具体应用实例。最后得出与传统制造方法相比具有效率高、成本低、操作简单等优点的结论。     

Thermal and mechanical properties of polyhedral oligomeric silsesquioxane (POSS)/polycarbonate composites

A series of composite materials were produced incorporating polyhedral oligomeric silsesquioxane (POSS) derivatives into polycarbonate (PC), by melt blending. Significant differences in compatibility were observed depending on the nano-scale filler's specific structure: trisilanol POSS molecules generally provided better compatibility with PC than fully-saturated cage structures, and phenyl-substituted POSS grades were shown to be more compatible with PC than fillers with other functional groups. Trisilanolphenyl-POSS/PC composites possess the best overall performance among the POSS materials tested. The high compatibility between the trisilanolphenyl-POSS and polycarbonate matrix results in generation of transparent samples up to 5 wt% POSS content. Slightly enhanced mechanical properties including tensile and dynamic mechanical modulus are observed with the increase of trisilanolphenyl-POSS loading at the cost of decreasing ductility of the nanocomposites. Importantly, upon orientation of the PC/POSS nanocomposite, crystallization of POSS within the oriented material results—this observation is consistent with a growing number of observations which suggest that ‘bottom-up’ formation of structures incorporating multiple POSS cages result from orientation of these nanocomposites, and that the hybrid organic-inorganic inclusions may be at the heart of observed nano-scale reinforcement.     

CLT酸工业现状

本文介绍了CLT酸的生产技术、国内生产与市场情况，并提出了其发展方向。     

Effect of surface free energy on the adhesion of biofouling and crystalline fouling

Pipelines and heat exchangers using seawater as coolant suffer from biofouling. Biofouling not only reduces heat transfer performance significantly, but also causes considerable pressure drop, calling for higher pumping requirements. It would be much more desirable if surfaces with an inherently lower stickability for biofouling could be developed. In this paper, a cost-effective autocatalytic graded Ni-Cu-P-PTFE composite coating with corrosion-resistant properties was applied to reduce biofouling formation. The experimental results showed that the surface free energy of the Ni-Cu-P-PTFE coatings, which were altered by changing the PTFE content in the coatings, had a significant influence on the adhesion of microbial and mineral deposits. The Ni-Cu-P-PTFE coatings with defined surface free energy reduced the adhesion of these deposits significantly. The anti-bacterial mechanism of the composite coatings was explained with the extended DLVO theory.     

泡沫陶瓷的研制

泡沫陶瓷是一种新型的功能陶瓷材料。它具有独特的结构和性能，在工业中有着广泛的应用前景。泡沫陶瓷具有密度小、透气性高、耐高温、抗化学腐蚀等特性。本研究对用颗粒强化的氧化铝骨架合成泡沫陶瓷进行了分析。这种材料比其它多孔陶瓷材料具有更好的热化学性质。这种材料可以用有机海绵浸浆获得，然后烧去海绵，留下多孔陶瓷网。这种方法的优点是它包含了过程参数和陶瓷结构，同时合成物的烧结情况及其它条件的影响在文中也有阐述。