Preparation and thermophysical properties of nano-sized Ln2Zr2O7 (Ln?=?La, Nd, Sm, and Gd) ceramics with pyrochlore structure

Rare earth zirconates (Ln₂Zr₂O₇, Ln = La, Nd, Sm, and Gd) with pyrochlore structure were prepared by hydrothermal method with polyethylene glycol as surfactant. X-ray diffraction, thermogravimetric analysis/differential scanning calorimetry, Fourier transform infrared spectroscopy, Raman spectroscopy, and field emission scanning electron microscopy were utilized to characterize the phase structure, thermal decomposition, and morphology of the products. Qualitative analysis indicates that the as-prepared zirconates are pyrochlore-type structures. The specific surface area, lattice parameter, and average crystallite size of the as-prepared products are closely related to the ionic radius. The activation energy of crystal growth shows an increasing trend with the decrease in ionic radii. The sintering behavior of compacted body was also investigated, revealing that the sintering-resistance properties of Ln₂Zr₂O₇ are descending as the order of La₂Zr₂O₇, Nd₂Zr₂O₇, Sm₂Zr₂O₇, and Gd₂Zr₂O₇.     

Influence of phosphorus on iron-based friction material prepared directly from vanadium-bearing titanomagnetite concentrates

In situ selective carbothermic reactions and vacuum sintering were used to prepare iron-based friction material directly from vanadium-bearing titanomagnetite c...     

核桃花中绿原酸、新绿原酸和隐绿原酸的提取工艺响应面优化及其抗氧化活性研究

目的 探讨干燥核桃花中绿原酸、隐绿原酸和新绿原酸的最佳提取工艺及其抗氧化活性。方法 采用超声波辅助乙醇法提取核桃花中的绿原酸、新绿原酸和隐绿原酸, 以提取温度、乙醇体积分数、提取时间和料液比为自变量, 以得率的总评归一值(overall desirability, OD)为因变量, 应用响应面对提取工艺进行优化, 并通过体外实验评价了其抗氧化活性。结果 最佳提取工艺为：温度77℃, 乙醇体积分数67%, 提取时间28 min, 料液比1: 23(g/mL)。此时,绿原酸、新绿原酸和隐绿原酸的总提取率最佳, OD值可达0.91, 对DPPH自由基、ABTS自由基和羟自由基的半数抑制浓度(Half-maximal Inhibitory concentrations, IC50)值分别为41.63、41.68和34.43 μg/mL。结论 优选出的工艺稳定可行, 且提取液具有较好的体外抗氧化活性, 为核桃花中绿原酸类成分的进一步开发利用提供了理论基础。     

Ag/LaNixCo1-xO3触点材料的制备及电接触性能研究

本文运用溶胶-凝胶燃烧法合成了双钙钛矿型LaNixCo1-xO3(LNCO)纳米材料,利用粉末冶金和热挤压技术制备了相应的Ag/LNCO触点材料及元件样品。重点考察了不同Ni、Co含量对Ag/LNCO触点材料微观结构、物相组成、物理性能、力学性能及电寿命服役能力的影响,对其电弧侵蚀失效行为进行了研究,并与SnO2粉体增强Ag基触点材料进行对比。结果表明:溶胶凝胶法合成的LNCO纳米颗粒粒径为20-30 nm,经粉末冶金工艺制备的Ag/LaNi0.5Co0.5O3触点材料电学性能和电寿命都优于Ag/SnO2触点材料,其电阻率低至2.10 μΩ?cm,电寿命性能达到51287次。表明Ag/LaNi0.5Co0.5O3触点材料性能较佳,是一种可以取代Ag/CdO的新型触点材料。     

A novel ethanol gas sensor based on ZnO-microwire

One-dimensional (1D) ZnO microwires were successfully synthesized by chemical vapor deposition and their structural and morphological properties were analyzed by X-ray diffraction and scanning electron microscopy, demonstrating that the microwires were single crystalline with perfect hexagonal structure and smooth surface. Using these 1D microstructures, we fabricated a novel ZnO-based ethanol gas sensor. Operating at room temperature, the sensor was found to have good sensing characteristics. The reliability and stability of the sensor could be improved by connecting multiple 1-wire devices (1-WD) in parallel into a multi-wires device. In interior natural lighting environment and under 3 V bias, the response and recovery time of the 1-WD to 200 ppm ethanol gas were <10 s and about 300 s, respectively, and the minimum and maximum detection limit were about 2 and 200 ppm, respectively. A sensing model was proposed for discussing the performance of the sensor. The simplicity in fabrication, low power consumption and low cost make the sensor suitable for practical application in many fields, especially in identifying driving under the influence and chemical industry monitoring.     

SiAlCN前驱体低温陶瓷化过程研究

采用异丙醇铝改性氨解制备的聚甲基乙烯基硅氮烷来制备聚铝硅氮烷,研究其在200～800℃下的陶瓷化过程中所发生的结构变化.采用红外光谱(IR)、气相色谱(GC)和耦合热重/差热分析(TG/DTA)对陶瓷化过程的键变化、挥发物、热失重和差热分析进行表征.结果表明:200℃之前有吸热峰是溶剂和低聚物挥发所致,此时只有1％的质量损失;质量损失主要发生在200～600℃之间,可达28％,进一步交联成键,大量CH4,H2和NH3放出;600℃到800℃只有3％的失重,陶瓷化过程基本结束.通过IR,GC和DTA推测出陶瓷化过程可能发生的变化,XRD结果表明800℃裂解产物是非晶态物质.     

Effect of carrier screening on ZnO-based resistive switching memory devices

The carrier screening effect occurs commonly in dielectric materials. It reduces the electric potential gradient, thus negatively affecting the functionality of resistive random access memory (RRAM) devices. An Au/ZnO film/Al-doped ZnO device fabricated in this work exhibited no resistive switching (RS), which was attributed to the carrier screening effect. Therefore, annealing was used for alleviating the screening effect, significantly enhancing the RS property. In addition, different on/off ratios were obtained for various bias values, and the screening effect was accounted for by investigating electron transport mechanisms. Furthermore, different annealing temperatures were employed to modulate the free carrier concentration in ZnO films to alleviate the screening effect. The maximal on/off ratio reached 10⁵ at an annealing temperature of 600 °C, yielding the lowest number of free carriers and the weakest screening effect in ZnO films. This work investigates the screening effect in RS devices. The screening effect not only modulates the characteristics of memory devices but also provides insight into the mechanism of RS in these devices.

Open image in new window

     

High Phase Purity of Large‐Sized 1T′‐MoS2 Monolayers with 2D Superconductivity

The development of transition metal dichalcogenides has greatly accelerated research in the 2D realm, especially for layered MoS₂. Crucially, the metallic MoS₂ monolayer is an ideal platform in which novel topological electronic states can emerge and also exhibits excellent energy conversion and storage properties. However, as its intrinsic metallic phase, little is known about the nature of 2D 1T′‐MoS₂, probably because of limited phase uniformity (<80%) and lateral size (usually <1 µm) in produced materials. Herein, solution processing to realize high phase‐purity 1T′‐MoS₂ monolayers with large lateral size is demonstrated. Direct chemical exfoliation of millimeter‐sized 1T′ crystal is introduced to successfully produce a high‐yield of 1T′‐MoS₂ monolayers with over 97% phase purity and unprecedentedly large size up to tens of micrometers. Furthermore, the large‐sized and high‐quality 1T′‐MoS₂ nanosheets exhibit clear intrinsic superconductivity among all thicknesses down to monolayer, accompanied by a slow drop of transition temperature from 6.1 to 3.0 K. Prominently, unconventional superconducting behavior with upper critical field far beyond the Pauli limit is observed in the centrosymmetric 1T′‐MoS₂ structure. The results open up an ideal approach to explore the properties of 2D metastable polymorphic materials.     

主动磁悬浮轴承支承旋转机械的减振性能研究

针对旋转机械的振动噪声问题,在对轴承工作特性及系统振动传递特性进行理论分析的基础上,提出了采用新型主动磁悬浮轴承取代传统机械轴承以实现整机减振降噪的设想.以某工程试验样机为研究对象,利用有限元软件考察了轴承的刚度变化对该样机轴承座机脚振动不平衡响应的影响,进而开展了专门的振动对比实验来对主动磁悬浮轴承的减振性能进行实际评估.结果表明:减小轴承刚度的思路对于降低旋转机械的机脚振动确实可行;相比于机械轴承,采用主动磁悬浮轴承支承对于减小整机振动水平具有显著实际效果.相关结论可为拓展主动磁悬浮轴承技术的应用领域和场合提供重要思路及数据支持,同时也为其今后的工程化实用奠定研究基础.     

NMOB与花生酸的组装多层膜及其非线性光学性质

利用与花生酸交替的方法，制备了2－硝基－5（N－甲基－N－十八烷基）氨基苯甲酸（NMOB）非中心对称多层膜，研究了它的非线性光学性质，结果表明，该多层膜的二次谐波强度与NMOB层数平方基本成正比。X－射线小角衍射测定结果再次表明，多层膜的排列相当有序，NMOB单层膜厚度为2．76nm.NMOB有良好的二阶非线性光学性质和出色的成膜性质，是一种很好的非线光学LB膜材料，可望用于制作光波导。