Determination of horseradish peroxidase concentration using the chemiluminescence of Cypridina luciferin analogue, 2-methyl-6-(p-methoxyphenyl)-3,7-dihydroimidazo[1,2-a]pyrazin-3-one

The chemiluminescence of the Cypridina luciferin analogue, 2-methyl-6-(p-methoxyphenyl)-3,7-dihydroimidazo[1,2-a]pyrazin++ +-3-one (MCLA) was observed at 462 nm in the presence of horseradish peroxidase (HRP) and the total spectrum of light emitted was found to depend linearly on HRP concentration. Methods for the determination of HRP concentration using the chemiluminescence was investigated. HRP could be detected in the range from 100 pmol/L to 100 nmol/L under the optimum condition, H2O2 (10 mmol/L) and MCLA (10 mumol/L) at pH 5.8.     

Dynamics and organization of MAP kinase signal pathways

In the budding yeast, Saccharomyces cerevisiae, four separate but structurally related mitogen-activated protein kinase (MAPK) activation pathways are known. The best understood of these regulates mating. Pheromone binding to receptor informs cells of the proximity of a mating partner and induces differentiation to a mating competent state. The MAPK activation cascade mediating this signal is made up of Ste11 (a MEK kinase [MEKK]), Ste7 (a MAPK/ERK kinase [MEK]), and the redundant MAPK-related Fus3 and Kss1 enzymes. Another MAPK activation pathway is important for cell integrity and regulates cell wall construction. This cascade consists of Bck1 (a MEKK), the redundant Mkk1 and Mkk2 enzymes (MEKs), and Mpk1 (a MAPK). We exploited these two pathways to learn about the coordination and signal transmission fidelity of MAPK activation cascades. Two lines of evidence suggest that the activities of the mating and cell integrity pathways are coordinated during mating differentiation. First, cells deficient in Mpk1 are susceptible to lysis when they make a mating projection in response to pheromone. Second, Mpk1 activation during pheromone induction coincides with projection formation. The mechanism underlying this coordination is still unknown to us. Our working model is that projection formation generates a mobile second messenger for activation of the cell integrity pathway. Analysis of a STE7 mutation gave us some unanticipated but important insights into parameters important for fidelity of signal transmission. The Ste7 variant has a serine to proline substitution at position 368. Ste7-P368 has higher basal activity than the wild-type enzyme but still requires Ste11 for its function. Additionally, the proline substitution enables the variant to transmit the signal from mammalian Raf expressed in yeast. This novel activity suggests that Ste7-P368 is inherently more permissive than Ste7 in its interactions with MEKKs. Yet, Ste7-P368 cross function in the cell integrity pathway occurs only when it is highly overproduced or when Ste5 is missing. This behavior suggests that Ste5, which has been proposed to be a tether for the kinases in the mating pathway, contributes to Ste7 specificity and fidelity of signal transmission.     

高速气流冲击式粉体表面改性装置——HYBRIDIZATION系统及应用

利用高速气流冲击法进行粉体/粉体系表面改性技术,是迄今为止各种粉体材料开发中最为引人注目的技术之一。HYBRIDIZATION(下称HYB)系统是利用高速气流冲击法对微粉体进行干式/机械化处理,是使材料复合化的最实用的装置,可对各类有机物、无机物、金属等进行广泛组合,通用性很强,适用于许多行业领域。从本文所述的系统构成、型式,有关的典型球形化处理的运转特性,利用复合化高温粉体测定被处理粉体表面温度,利用颜料改变色调等的处理特点及该系统的适用性等(一部分是从已发表的学术论文及专利上摘录的),可以说明HYB系统的概况。     

Catalysis of gasification of coal-derived cokes and chars

Calcium is the most important in-situ catalyst for gasification of US coal chars in O₂, CO₂ and H₂O. It is a poor catalyst for gasification of chars by H₂. Potassium and sodium added to low-rank coals by ion exchange and high-rank coals by impregnation are excellent catalysts for char gasification in O₂, CO₂ and H₂O. Carbon monoxide inhibits catalysis of the CH₂O reaction by calcium, potassium and sodium; H₂ inhibits catalysis by calcium. Thus injection of synthesis gas into the gasifier will inhibit the CH₂O reaction. Iron is not an important catalyst for the gasification of chars in O₂, CO₂ and H₂O, because it is invariably in the oxidized state. Carbon monoxide disproportionates to deposit carbon from a dry synthesis gas mixture (3 vol H₂ + 1 vol CO) over potassium-, sodium- and iron-loaded lignite char and a raw bituminous coal char, high in pyrite, at 1123 K and 0.1 MPa pressure. The carbon is highly reactive, with the injection of 2.7 kPa H₂O to the synthesis gas resulting in net carbon gasification. The effect of traces of sulphur in the gas stream on catalysis of gasification or carbon-forming reactions by calcium, potassium, or sodium is not well understood at present. Traces of sulphur do, however, inhibit catalysis by iron.     

Some theoretical aspects of the electrophoretic sedimentation of particles

This paper concerns the theoretical interpretation of the results of a previous experimental study of the sedimentation of oxidized fine aluminum and iron particles in waste kerosene under the influence of an electric field. Following the Kynch analysis of the mode of gravity sedimentation, a modified particle volume flux is introduced to compensate for the effect of the electric field strength. It is shown that if the local electric field strength at the settling interface is used as the true driving force for electrophoretic sedimentation, the settling curves can be predicted with reasonable accuracy, provided that electrical heating effects and consequent temperature changes in the system are taken into account.Some theoretical aspects of the effects of dielectric polarization on settling are also discussed and illustrated qualitatively by the experimental data. Finally, some of the factors which might be expected to affect the energy efficiency of a particle separator operating by electrophoretic sedimentation are considered.     

The reaction of polypropylene with maleic anhydride

An addition reaction of maleic anhydride with polypropylene takes place in the presence of radical reagents or sunlight. The initial rate of the reaction was proportional to the concentration of polypropylene and maleic anhydride, and one-half power of the concentration of the radical reagents. The increase in the temperature from 80 to 120°C increased the rate of the reaction and di-cumyl peroxide was effective as a radical reagent for this reaction. Ionic crosslinked rubber-like polymers were obtained from the reaction of maleic polypropylene with some alkali metal compounds. They showed the characteristic absorption band due to ? COO^? in their infrared spectra.     

Carbon-13 NMR spectroscopic analysis of 24-methyl-Δ5,22-sterols in rape and mustard seed oils

24-Methylcholesta-5,E-22-dien-3β-ol (C₂₈ Δ^5,22-sterol) was separated from the unsaponifiable matters of the following eight seed oils of Brassica species:Brassica campestris (candle I and II and torch),B. napus (tower and midas),B. juncea (brown and oriental mustards), andB. alba (yellow mustard). The configuration at C-24 methyl group of the respective sterols was evaluated by¹³C NMR spectroscopy. All the C₂₈ Δ^5,22-sterols in the Brassica seed oils were found to contain the C-24 epimer of brassicasterol,trans-22-dehydrocampesterol, in the range of ca. 10–30%.     

Predicting viewer-perceived activity/dominance in soccer games with stick-breaking HMM using data from a fixed set of cameras

We attempted to predict activity/dominance for soccer games, where activity is defined as the degree of activity of the game as perceived by the viewer, whereas dominance is the degree at which the viewer perceives a particular team to dominate over the other team. Such activity/dominance information would help a layman viewer understand the game. It would also enable construction of an automatic digest creation system that extracts scenes having high activity/dominance. There are two facets of this study: 1. The main part of the underlying prediction model consists of a Stick-Breaking Hidden Markov Model, where the data automatically estimates the number of states of the Markov process behind the data. 2. The data used in this paper is vector time-series data consisting of player, referee, and ball positions, together with team information, acquired by a set of fixed cameras. The problem was approached with a Bayesian framework where learning and prediction were implemented by three different methods: Markov Chain Monte Carlo, Expectation Maximization, and Variational Bayes. The proposed method was tested using a dataset consisting of 10 professional soccer games and was compared against standard regression methods.     

Studying re-opened bugs in open source software

Bug fixing accounts for a large amount of the software maintenance resources. Generally, bugs are reported, fixed, verified and closed. However, in some cases bugs have to be re-opened. Re-opened bugs increase maintenance costs, degrade the overall user-perceived quality of the software and lead to unnecessary rework by busy practitioners. In this paper, we study and predict re-opened bugs through a case study on three large open source projects—namely Eclipse, Apache and OpenOffice. We structure our study along four dimensions: (1) the work habits dimension (e.g., the weekday on which the bug was initially closed), (2) the bug report dimension (e.g., the component in which the bug was found) (3) the bug fix dimension (e.g., the amount of time it took to perform the initial fix) and (4) the team dimension (e.g., the experience of the bug fixer). We build decision trees using the aforementioned factors that aim to predict re-opened bugs. We perform top node analysis to determine which factors are the most important indicators of whether or not a bug will be re-opened. Our study shows that the comment text and last status of the bug when it is initially closed are the most important factors related to whether or not a bug will be re-opened. Using a combination of these dimensions, we can build explainable prediction models that can achieve a precision between 52.1–78.6 % and a recall in the range of 70.5–94.1 % when predicting whether a bug will be re-opened. We find that the factors that best indicate which bugs might be re-opened vary based on the project. The comment text is the most important factor for the Eclipse and OpenOffice projects, while the last status is the most important one for Apache. These factors should be closely examined in order to reduce maintenance cost due to re-opened bugs.