Preparation and properties of CuInS2 thin film prepared from electroplated precursor

Thin CuInS₂ films were prepared by sulfurization of Cu/In bi-layers. First, the precursor layer was electroplated onto the treated surface of Mo-coated glass. Observation of the cross-section prepared by focused ion beam (FIB) etching revealed that the void-free film was initially formed on the top surface of the precursor layer and continued to grow until the advancing front of the film reached the Mo layer. The nucleation of voids near the bottom of the CuInS₂ film followed. To determine whether the condition of the Cu/In alloy influences the CuInS₂ quality we investigated the Cu/In alloy state using FIB. We found that the annealed precursor of low Cu/In ratio (1.2) has several voids in the mid position in the layer compared with Cu-rich precursor (1.6). The cross-sectional view of the Cu-rich absorber layer is uniform compared with the low copper absorber layer. Thin film solar cells were fabricated using the CuInS₂ film (Cu/In ratio: 1.2) as an optical absorber layer. It was found that the optimization of a sulfurization period is important in order to improve the cell efficiency. We have not yet obtained good results with high Cu-rich absorber because of a blister problem. This blister was found before sulfurization. So, we are going to solve this blister problem before sulfurization.     

SIR Weighting Combining Diversity Using Matched Filter for Personal Communication Systems

We propose a novel SIR weighting postdetection combining diversity scheme with a new accurate SIR estimation method. The SIR is estimated and used as the weighting factor to compensate severe cochannel interference, one of the most important issues for PCS in terms of frequency utilization. Theimprovement offered by the proposal depends on SIR estimation accuracy.The SIR is, in this paper, estimated by a matched filter where theauto-correlation between received signal and unique word is calculated. Computer simulationsconfirm that the SIR of each diversity branch can be estimated easily andaccuratelyby the proposed SIR estimation method. The proposed diversity scheme achievesaperformance very close to that of ideal SINR weighting diversity underRayleighfading with severe cochannel interference. When average SIR = 10 dB and thenumber of branches(L)=4, the proposed diversity scheme lowers the requiredE_b/N₀ by 5 dB at BER = 1×10^-3compared to conventional maximal ratio combining diversity. This paper alsopresentsthe unique word length required to realize adequate performance, i.e.,robustnessagainst high-pitch Rayleigh fading.     

Optical frequency domain ranging by a frequency-shifted feedbacklaser

This paper describes the theoretical and experimental study of a new technique for optical frequency domain ranging (OFDR) by a frequency-shifted feedback (FSF) laser. In conventional OFDR, a frequency chirped single-mode laser is used as a light source to convert a distance into a beat frequency, and a tradeoff exists between measurement range and resolution. The FSF laser output consists of periodically generated chirped frequency components whose chirp rate is faster than 100 PHz/s (P=10¹⁵), By use of the FSF laser, the tradeoff is removed and long-distance high-resolution OFDR is realized In the experiment, a distance of 18.5 km was measured with a resolution of 20 mm     

Liquid Marble Patchwork on Super-Repellent Surface

Liquid marble (LM) is a droplet that is wrapped by hydrophobic solid particles, which behave as a non-wetting soft solid. Based on these properties, LM can be applied in fluidics and soft device applications. A wide variety of functional particles have been synthesized to form functional LMs. However, the formation of multifunctional LMs by integrating several types of functional particles is challenging. Here, a general strategy for the flexible patterning of functional particles on droplet surfaces in a patchwork-like design is reported. It is shown that LMs can switch their macroscopic behavior between a stable and active state on super-repellent surfaces in situ by jamming/unjamming the surface particles. Active LMs hydrostatically coalesce to form a self-sorted particle pattern on the droplet surface. With the support of LM handling robotics, on-demand cyclic activation–manipulation–coalescence–stabilization protocols by LMs with different sizes and particle types result in the reliable design of multi-faced LMs. Based on this concept, a single bi-functional LM is designed from two mono-functional LMs as an advanced droplet carrier.     

Quantum Oscillations of Thermoelectric Effects in a Pseudo-one-dimensional Electron Gas With a Spin–Orbit Interaction

We consider thermoelectric effects in a pseudo-one-dimensional electron gas (P1DEG) with a spin–orbit interaction (SOI). The SOI splits the dispersion relation of the P1DEG into subbands with an energy gap. We find quantum oscillations in transport coefficients, which coincide with the locations of the subband edges, as a function of the electrochemical potential.     

Automated camerawork for capturing desktop presentations

A novel automated camera control method for capturing desktop presentations is introduced. Typical features and the camerawork of shots that appear frequently in TV programs are discussed. To realise those features in this automated video capturing system, the purpose of camerawork is classified from two points of view: target and aspect-of-target. Then, the correspondence between the classification and typical shots and camerawork is considered. A virtual-frame control algorithm based on this idea is proposed, and its implementation in a video production system. Results are shown that verify this method through two kinds of experiments, virtual video capturing using CG animations and real video capturing of real presentations.     

Purification of metallurgical‐grade silicon up to solar grade

An estimate has been made of the feasibility of a metallurgical purification process, the NEDO (New Energy and Industrial Technology Development Organization) melt‐purification process, for manufacturing solar‐grade silicon from metallurgical‐grade silicon. Equipment has been developed to pilot manufacturing plant scale. The system comprises an electron‐beam furnace for phosphorus removal and a plasma furnace for boron removal. Each furnace has a mold for directional solidification to remove metallic impurities. The concentration of each impurity in the silicon ingot purified through the whole process satisfied the solar‐grade level. The Solar‐grade silicon produced showed p‐type polarity and resistivity within the range 0·5–1·5 Ω cm. Copyright © 2001 John Wiley & Sons, Ltd.     

Rocket-triggered lightning experiments on zinc oxide arresters and their applications to power transmission lines

In measurements of rocket-triggered lightning current and voltage performed between 1986 and 1995 on the mountain top of Okushishiku in the Kanazawa area, the authors succeeded in artificially inducing winter lightning to arresters. Using the data obtained from those measurements, we analyzed the energy absorption characteristics of surge arresters, such as are installed on every transmission line tower for three phrases, by EMTP. The energy withstand capability of an individual arrester was verified to be approximately the same as the expected value. The analysis results for the energy share of each arrester connected in parallel showed that the usual light duty arresters installed on every tower have the possibility to be able to absorb extreme winter lightning energy even if the lightning hits the power line directly. © 1998 Scripta Technica. Electr Eng Jpn, 122(4): 25–33, 1998     

Formation of uniform GaAs multi-atomic steps with 20–30 nm periodicity and related structures on vicinal (111)B planes by MBE

We studied morphology of GaAs surfaces and the transport properties of two-dimensional electron gas (2DEG) on vicinal (111)B planes. Multi-atomic steps (MASs) are found on the vicinal (111)B facet grown by molecular beam epitaxy, which will affect electron transport on the facet. We also studied how the morphology of GaAs epilayers on vicinal (111)B substrates depends on growth conditions, especially on the As₄ flux. The uniformity of MASs on the substrates have been improved and smooth surfaces were obtained when the GaAs was grown with high As₄ flux, providing step periodicity of 20 nm. The channel resistance of the 2DEG perpendicular to the MASs is reduced drastically with this smooth morphology. These findings are valuable not only for fabricating quantum devices on the (111)B facets but also those on the vicinal (111)B substrates.     

High-power, wide-temperature range operation of 1.3-/spl mu/m gain-coupled DFB lasers with automatically buried InAsP absorptive grating

DFB lasers operating at 1.3 /spl mu/m with gain-coupling structure show single-mode operation over a wide temperature range of -20/spl sim/85/spl deg/C and up to a high power of 130 mW. These lasers have InAsP absorptive grating, which can be formed by a substantially simplified fabrication process, involving annealing a corrugated InP substrate in an atmosphere of mixed arsine and phosphine.