Synthesis and characterization of polyimide/hexagonal boron nitride composite

Polyimide (PI)/hexagonal boron nitride (h‐BN) composites were produced via the thermal imidization procedure from solution mixtures of a polyamicacid, which is prepared from 3,3′,4,4′‐benzophenonetetracarboxylic dianhydride and 3,3′‐diaminodiphenyl sulfone (DADPS) in N‐methyl‐2‐pyrrolidone (NMP), and alkoxysilane functionalized h‐BN. The structure, thermostability, thermal behavior, and surface properties of the resulting materials were characterized by means of Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), scanning electron microscopy (SEM). The thermal characteristics of PI/h‐BN films were better than the pure PIs. The physical and mechanical properties of the films were evaluated by various techniques such as contact angle, chemical resistance, and tensile tests. The flame retardancy of the composite materials was also examined by the limiting oxygen index (LOI). The experiments showed that the LOI values of PIs increased from 32 to 43 for the materials containing hexagonal boron nitride. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Pressureless sintering of β-SiAlON ceramic compositions using fluorine and oxide additive system

SiAlONs are silicon aluminium oxynitride ceramic materials with a range of technically important applications, from cutting tools to specialised refractories and the properties of SiAlONs can be tailored for specific purposes. In this study, different β-SiAlON compositions were prepared using fluoride (MgF₂ as fluorine source plus Y₂O₃) and oxide (MgO plus Y₂O₃). These compositions were pressureless sintered under nitrogen atmosphere in the range of 1450–1750 °C for 0.5–2.5 h for comparison of densification behaviour and mechanical properties. Densities of samples were measured and analyses of result products were carried out using SEM and XRD. The F-doped sintered β-SiAlON ceramics showed better densities and less pore micrographs especially at lower temperatures compared with the fluorine free samples. Full densifications were achieved for β-SiAlON ceramics with fluoride addition at 1700 °C for 60 min. Consequently, fluorine addition to additive system has a good effect on mechanical properties and densification behaviour.     

Leaching kinetics of colemanite in ammonium hydrogen sulphate solutions

The aim of the study was to investigate the dissolution kinetics of colemanite in ammonium hydrogen sulphate solutions in a mechanical agitation system and to declare an alternative reactant to produce boric acid. Reaction temperature, concentration of ammonium hydrogen sulphate, stirring speed, solid/liquid ratio and particle size were selected as parameters on the dissolution rate of colemanite. The experimental results were successfully correlated by linear regression using Statistica Package Program. Dissolution curves were evaluated in order to test shrinking core models for solid–fluid systems. It was observed that increase in the reaction temperature and decrease in the solid/liquid ratio causes an increase the dissolution rate of colemanite. The dissolution extent is highly increased with increase the stirring speed rate between 100 and 500 rpm and the dissolution extent is slowly increased with increase the stirring speed between 500 and 700 rpm in experimental conditions. The activation energy was found to be 32.66 kJ/mol. The leaching of colemanite was controlled by diffusion through the ash or product layer. The rate expression associated with the dissolution rate of colemanite depending on the parameters chosen may be summarized as follows: 1 ? 3(1 ? X)^2/3 + 2(1 ? X) = 8.99 × C^1.08 × W^1.39 × D^?1.27 × (S/L)^?0.54 × e^(?32.66/RT)t.     

Preparation of hybrid PU/PCL fibers from steviol glycosides via electrospinning as a potential wound dressing materials

In this study, the synthesis and application of biocompatible steviol glycosides based polyurethane/poly (ε-caprolactone) (PU/PCL) fibers was performed by electrospinning as a potential wound dressing materials that can be used for the closure of nonhealing wounds. During electrospinning, steviol glycoside-based polyurethane structures were used in blend formation with poly (ε-caprolactone) for easy producibility. Steviol glycosides are a natural abundant and easily accessible source as the main component of the wound dressing material due to their free hydroxyl groups, high biocompatibility, and hydrophilicity. The structure of steviol glycosides is composed of saccharide units and the free OH groups. Thus, steviol glycosides act as a crosslinker within the polyurethane structure and provides mechanical strength. For the production of steviol glycosides based PU/PCL fibers first, the steviol glycosides as a monomer were isolated from the stevia rebudiana. Then, polyurethane structures containing stevia glycoside were synthesized with hexamethylene diisocyanate, lactose and PEG-200 by solution polymerization technique. PCL was added to the prepared polyurethanes in a ratio of 1:2 and formation of nanofiber structure. The prepared wound dressing material was characterized by Fourier transform infrared, atomic force microscopy, and scanning electron microscope techniques. Swelling degree, water content and oxygen permeability assay of the steviol glycosides based PU/PCL wound dressing material was determined. In biocompatibility test, cell viability value of PU/PCL fibrous materials in indirect cytotoxicity test was determined as 86.9% and cell adhesion on hybrid PU/PCL fibers was showed as morphological. In accordance with this target, the steviol glycosides based PU/PCL wound dressing material can be produced easily and low cost. As a result, the wound dressing materials obtained with their high biocompatibility and low costs will be an effective and fast method for the healing of open wounds of diabetics.     

Challenges and Opportunities of Modeling Biomass Gasification in Aspen Plus: A Review

Aspen Plus has become one of the most common process simulation tools for both academia and industrial applications. In the last decade, the number of the papers on Aspen Plus modeling of biomass gasification has significantly increased. This review focuses on recent developments and studies on modeling biomass gasification in Aspen Plus including key aspects such as tar formation and model validation. Accordingly, challenges in modeling due to specific assumptions and limitations will be highlighted to provide a useful basis for researchers and end-users for further process modeling of biomass gasification in Aspen Plus.     

Determination of the quality and purity characteristics of olive oils obtained from different regions of Turkey,depending on climatic changes

Virgin olive oils (VOOs) obtained from olives grown in different regions of Turkey under changing climatic conditions sometimes show different sensory and chemical properties. This study was planned to determine whether these deviations are due to climatic changes or not. For this purpose, five different olive varieties (Ayvalık, Memecik, Gemlik, Nizip Yağlık, Kilis Yağlık) of commercial importance were harvested from the provinces/districts (four different region) where cultivation is intense during the 2017/2018–2020/2021 harvest years. Every year, olive samples were collected from 3 orchards from 13 provinces/districts. One hundred and fifty-six samples were subjected to the purity, quality and sensory analysis. Basic climatic values (average, minimum and maximum temperature, humidity and precipitation) were examined for four consecutive years. All of the examined olive oil samples were determined within the legal limits in terms of fatty acid composition and fatty acid ethyl ester values. However, delta-7-stigmastenol value from the sterol composition was found to be above 0.5% in some samples in all the years studied (total 21 samples). Delta-7-stigmastenol values of olive oil samples varied between 0.16% and 1.14%. Multiple linear regression analysis was applied using a genetic algorithm-based inverse least squares method to determine whether there is a relationship between climate data and delta-7-stigmastenol values. According to this result, it has been determined that the delta-7-stigmastenol value is high when the annual average relative humidity is low and the annual average temperature is high. There is an urgent need to make forward-looking plans due to climate change.     

Deposition and Characterization of Si Substituted Cu2ZnSnS4 Thin Films

Silicon - The influence of the Si substitution ratio on the structural, morphological, and optical properties of Cu2ZnSnS4 (CZTS) thin films was examined. The Cu2Zn(SixSn1–x)S4 thin films...     

Chlorophyll adsorption on acid-activated clay

An acid-activated clay (Çanakkale montmorillonite from Turkey) was used to adsorb chlorophyll from hexane solutions. The phenomenon seems to be mainly driven by the interaction of chlorophyll with acid sites. The adsorption of chlorophyll on Brönsted acid sites was indicated by a characteristic infrared band for the -OH group at 3671 cm^?1. The variations in the structure of clay mineral and chlorophyll during adsorption have been examined by differential thermal analysis, thermogravimetry and infrared spectroscopy of the activated clay before and after adsorption of chlorophyll. Oxidation of adsorbed chlorophyll was completed at quite a high temperature.     

Functional polyamides. 3. Synthesis and chelating properties of a new poly(amide thioether)

Polymerization of β,β′-(ethylenedithio)dipropionitrile

1 IUPAC name: 4,7-dithiadecane dinitrile.

with formaldehyde in the presence of sulfuric acid was carried out in order to permit the synthesis of polymides containing thioether groups. The obtained poly(amide thioether)s were characterized; they coordinate mercury (II) with a high degree of selectivity.     

Preparation of multiphase block copolymers by redox polymerization process

Redox polymerization of methylmethacrylate (MMA) using Ce(IV) with poly(oxyethylene) having azo and hydroxy functions was carried out to yield methylmethacrylate-ethylene glycol block copolymers with labile azo linkages in the main chain. These prepolymers were used to initiate the radical polymerization of styrene through the thermal decomposition of the azo group, resulting in the formation of multiblock copolymers. Successful blocking has been confirmed by fractional precipitation, a strong change in the molecular weight distribution and spectral measurements.