Studies on dry spinning. I. Fundamental equations

One difficulty in analyzing the state of filament in the dry spinning process is that in the boundary conditions required to solve the equations of mass, momentum and energy which are derived on the consideration of balance with respect to infinitesimally small element are not given a priori. The equations which include these boundary conditions in themselves are derived by considering mass, momentum, and energy balances with respect to the entire cross section of filament. These additional macroscopic equations are simplified to a great extent by assuming the flat velocity profile through the cross section of filament. Besides, in the steady state, these macroscopic equations are modified to give the equations of average solvent content, spinning tension, cross-sectional area, and average temperature. When the spinning conditions are given and the physical constants are measured for a given polymer and solvent system, it becomes possible to calculate the state of filament by solving these microscopic and macroscopic equations simultaneously without resorting to actual spinning.     

Effects of rice cleaning and cooking process on the residues of flutolanil,fenobucarb, silafluofen and buprofezin in rice

We studied the effect of cleaning and cooking on the residues of flutolanil, fenobucarb, silafluofen and buprofezin in rice. The rice had been sprayed in a paddy field in Wakayama city, with 3 kinds of pesticide application protocols: spraying once at the usual concentration of pesticides, repeated spraying (3 times) with the usual concentration of pesticides and spraying once with 3 times the usual concentration of pesticides. The residue levels of pesticide decreased during the rice cleaning process. Silafluofen, which has a higher log Pow value, remained in the hull of the rice. Fenobucarb, which has a lower log Pow value, penetrated inside the rice. The residue concentration of pesticide in polished rice was higher than that in pre-washed rice processed ready for cooking. During the cooking procedure, the reduction of pesticides in polished rice was higher than that in brown rice.     

The separation of reflected and transparent layers from real-world image sequence

This paper presents an optimal method for the separation of reflected and transparent layers from real-world scene images. Whereas past research has been applied to indoor environments and static cameras, our technique can be used for outdoor scenes and motion cameras. The method is based on spatio-temporal analysis, especially using epipolar plane images (EPI). The edge and color information of EPI has been used to segment the areas on EPIs efficiently and separate the reflected and transparent layers. This method can be used for refining building textures by removing reflections from captured images for the purpose of city modeling.     

Building more solid bridges between Buddhism and Western psychology.

Introducing the ways of cultivating mental balance, B. A. Wallace and S. L. Shapiro (see record 2006-12925-003) attempted to build bridges between Buddhism and psychology. Their systematic categorization of Buddhist teachings and extensive review of empirical support from Western psychology are valuable for future study. However, it remains a matter of concern that some more profound parts of Buddhist philosophy can be disregarded by focusing only on practical aspects of Buddhism within the context of mental health. In this comment, the authors briefly address four substantial themes to be considered: reality, identity, causality, and logicality. They suggest that the way to interpret Buddhism as techniques for well-being would certainly be viable in encouraging the study of Buddhist teachings in psychology. Yet, such attempts should not result in superficial imports and applications of Buddhist practices but give due weight to the deeper philosophical issues to build more solid bridges between Buddhism and psychology. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Studies on solder bump electromigration in Cu/Sn–3Ag–0.5Cu/Cu system

This paper aims to understand the solder bump electromigration phenomenon in the Cu/Sn–3Ag–0.5Cu/Cu system. A temperature of 453 K with a current density of 10 kA/cm² was applied. A void nucleated at the highest current density point at the cathode. As the void grew along the cathode side, a solder depletion occurred on the opposite side of the electron entry point, resulting in an open failure. A unique purposely-designed 3D model simulation methodology provides a good understanding of the void nucleation and growth behavior. The temperature of the solder joint during the electromigration test was measured successfully by the resistance change in the junction line between the two joints.     

A Gait Phase Measurement System Using Treadmill Motor Current

The article describes the development of a gait phase time-based split-belt treadmill measurement system. Conventional methods of measuring gait phase, such as the foot switch and force plate, require significant preparation and are costly. In this article, we propose a simple, cheap, and accurate gait phase measurement system that utilizes only the treadmill motor current value. Comparison of this algorithm with conventional methods reveals that the proposed algorithm is as accurate as the foot switch. Moreover, the proposed algorithm can estimate stance phase within a 0.2?s error of the measured value of the force plate in most cases (four out of five healthy subjects). This accuracy is higher than that of the foot switch which is widely used in the clinical field.     

Degradation Kinetics and Storage Stability of Vacuum Spray-Dried Micro Wet-Milled Orange Juice (<Emphasis Type="Italic">Citrus unshiu</Emphasis>) Powder

The aim of this work was to evaluate the degradation kinetics and stability of micro wet milled orange juice powders obtained by vacuum spray drying, using maltodextrin as a carrier agent. Powders were produced with four combinations of orange juice solids/maltodextrin solids 60:40, 50:50, 40:60, and 30:70 by weight. Ascorbic acid degradation, color, and antioxidant activity of powders were evaluated throughout 90 days. Powders were stored at 10, 25, and 35 °C and relative humidity of 33%. Temperature and storage time negatively influenced the stability of ascorbic acid and color, whereas antioxidant activity increased at the beginning of storage at a higher temperature then decreased slightly after 60 days. For stability study, powders were stored at different water activities (0.11 to 0.84) in order to determine the plasticizing effects of water on glass transition temperature. Both water activity and glass transition temperature were used to predict the critical conditions for storage. Vacuum spray dried powder produced with a ratio of 30:70 (orange juice solids/maltodextrin solids) was considered as the most stable, since it showed highest critical water activity (a_w?=?0.61) and lowest moisture content (0.11 g water/g of dry solid) among the four powders. Vacuum spray drying using superheated steam as the heating medium was proven to be an effective way of producing orange juice powders with minimum loss of nutrients.     

Development of a single loop EPR test method and its relation to grain boundary microchemistry for alloy 600

A single loop electrochemical potentiokinetic reactivation test method has been developed for alloy 600 that produces good passivation on all the surfaces, good etching during the reactivation scan and no appreciable pitting. It is able to quantify and discriminate between samples with a wide range of degree of sensitization. The Pa value correlates well with the minimum level of chromium in the depletion regions at the grain boundaries. It has been shown that the width of the attacked regions is much larger than the width of chromium depletion regions and it does not show any direct correlation with either depth or width or with a volume parameter of chromium depletion regions. It has been shown that the chromium carbides are not attacked during the test and that the intragranular regions attacked during the test are the sites of chromium carbides in the grain matrix. A modified Pa parameter is shown to be sensitive down to 7.5 wt% chromium in the depletion regions and indicates that the intragranular carbides have shallower depletion profiles than those at grain boundaries. Comparison of the results of the single loop and the double loop tests showed a good correlation.     

Development of a strain for efficient degradation of polychlorinated biphenyls by patchwork assembly of degradation pathways

Rhodococcus jostii RHA1 accumulates chlorobenzoates (CBA) during the degradation of polychlorinated biphenyls (PCBs). CBA degradation is considered one of the rate-limiting steps in the complete degradation of PCBs. To reduce the accumulation of CBAs, the upper pathway enzyme genes for PCB degradation of RHA1 were introduced into a CBA-degrading bacterium, Burkholderia sp. NK8. The resulting recombinant strain exhibited no biphenyl 2,3-dioxygenase (BphA) activity encoded by bphAaAbAcAd genes, which encode the large and small subunits of the terminal oxygenase component and the ferredoxin and reductase subunits responsible for electron transfer from NADH to the large subunit. The remaining enzyme genes involved in the transformation of biphenyl to benzoate, bphB2C1D1, which encode dehydrogenase, ring-cleavage dioxygenase and hydrolase, conferred activities to NK8. To obtain the BphA activity of RHA1 in NK8, sets of BphA genes were constructed by combining the bphAaAbAcAd genes of RHA1 and bphA3A4 of Pseudomonas pseudoalcaligenes KF707, encoding the ferredoxin and reductase subunits. Hybrid derivatives of BphA containing the KF707 bphA3 conferred BphA activity to NK8, and a derivative containing the RHA1 bphAaAb and KF707 bphA3A4 genes exhibited the highest BphA activity. A plasmid containing the RHA1 bphAaAb and KF707 bphA3A4 genes plus the RHA1 bphB2C1D1 genes was constructed and introduced into NK8. The resulting recombinant strain efficiently degraded 2-, 3- and 4-chlorobiphenyls with an apparent reduction in CBA accumulation in comparison to the recombinant mutant strain, which had an insertion in the cbeA gene to inactivate CBA dioxygenase.