基于B点磁探针膛内电枢电弧长度与速度分布测量的计算机控制系统的研究

基于B点磁探针的测量原理，建立了电磁轨道炮膛内三维等离子体电枢电弧长度和电弧运动速度测量的数学模型，通过对该模型的分析给出了用于测量膛内电枢电弧长度和运动速度分布的相应推论。开发了用于测量膛内等离子体电枢电弧长度和速度的多通道计算机控制诊断系统，并进行了相应的试验研究。     

FBOLES—outline of a frequency-based on-line expert system approach for fault diagnoses in nuclear power plants

The basic concept of a novel frequency-based on-line expert system (FBOLES) approach for on-line fault diagnoses in nuclear power plants has been presented previously. This paper reports further progress, and includes how to express the uncertainties of expert opinion in knowledge-bases and propagate then in inferences, and how to deal with imperfect knowledge-bases. It also describes the main elements of FBOLES and outlines how the system works under complex conditions including the dynamic behavior of signals during accidents, multiple failures, and on-line changes of plant operation mode. Its ability to diagnose root causes of accidents has been tested using the main steam and feedwater condensate systems of a full-scale, three-loop, 950 MW nuclear power plant simulated by the Tsinghua simulator. So far the results seem good.     

马克法输铝管用胶结剂的研制及应用

用粘土熟料、软质粘土及复合结合剂研制的胶结剂,用于马克法铸钢输铝管系统的胶结,其使用性能和使用寿命达到或超过了进口胶结剂的水平。     

An investigation of bulk recycling planning for an electronics recycling facility receiving industrial returns versus residential returns

Since most end-of-life electronics equipment contain hazardous materials such as lead solder alloys or lead-impregnated glass, it is important to divert them from landfills. For end-of-life products that are not repairable and do not contain reusable parts, bulk recycling is an alternative to recover base materials. In this paper, we contrast production and recycling planning and distribution decisions, activities, and costs. We reveal that while a traditional production facility connects suppliers and customers, a recycling facility connects both "input" and "output" customers. As a result, decisions in short-term bulk recycling planning include what products to accept, what products to process and reprocess, and what products to carry in inventory. Many recyclers set prices to receive "input" based on experience. For various prices to receive "input", we use a new analytical model to investigate the sensitivity of the short-term bulk recycling planning decisions in products from two different sources: industrial returns versus residential returns. The results of the case study show that different decisions are recommended for the industrial returns versus the residential returns when the total quantity of the incoming products is equal.     

利用资本市场促进玻璃企业持续稳定发展

从能源、市场和效益角度入手,浅显分析了玻璃企业现状,提出了企业应根据市场变化调整决策,利用现代资 本市场建立现代化企业制度,将油价大幅上升做为企业获取巨额利润的重大机遇,保持企业稳步长久发展。     

高等植物氨基酸生物效应的研究进展

本文对氨基酸营养条件下植物体内硝酸盐含量变化及其机理,土施植物激素前体色氨酸和蛋氨酸对高等植物生长和化学组成的影响。氨基酸和氨基酸肥料对植物产量和品质的影响作了综述。     

Recovery of pyruvic acid with weakly basic polymeric sorbents

BACKGROUND: Carboxylic acids are among the most important substances that can be manufactured from biomass. However, the recovery of carboxylic acids from fermentation broths presents a challenging separation problem. To avoid the production of waste salts and net consumption of chemicals in the calcium carboxylate salt process, the use of reversible chemical complexation with polymeric sorbents and extractants is attractive for carboxylic acid recovery. Pyruvic acid is widely used in the manufacture of medicines, pesticides and foodstuffs and can be produced by fermentation. Since the acidity of pyruvic acid (pK_a = 2.49) is stronger than that of normal carboxylic acids, and as few reports on the recovery of pyruvic acid are available, the sorption of pyruvic acid from aqueous solution on two types of weakly basic polymeric sorbent, tertiary amine D301R and primary amine D392, was investigated over a wide pH range and at various salt (MgSO₄) concentrations. RESULTS: Overloading adsorption of pyruvic acid on both weakly basic polymeric sorbents occurred, with the overloading of D392 being greater than that of D301R. The adsorption of pyruvic acid on both sorbents was greatly affected by the solution pH and the salt concentration in the aqueous phase. An overloading model was able to predict the experimental uptake data very well. CONCLUSION: Solution pH is one of the most important operating conditions, and both polymeric sorbents D392 and D301R can be used to recover pyruvic acid from dilute aqueous solution with high efficiency at a solution pH around 2. The uptake by D392 is greater than that by D301R owing to steric hindrance of the tertiary amine. Copyright © 2008 Society of Chemical Industry     

Modeling operation and microarchitecture concurrency for communication architectures with application to retargetable simulation

In multiprocessor-based system-on-chips (SOCs), optimizing the communication architecture is often as important as, if not more than, optimizing the computation architecture. While there are mature platforms and techniques for the modeling and evaluation of computation architectures, the same is not true for the communication architectures. A major challenge in modeling the communication architecture is managing the concurrency at multiple levels: at the operation level, multiple communication operations may be active at any time; at the microarchitecture level, several microarchitectural components may be operating in parallel. Further, it is important to be able to clearly specify how the operation-level concurrency maps to the microarchitectural-level concurrency. This paper presents a modeling methodology and a retargetable simulation framework which fill this gap. This framework seeks to facilitate the design space exploration of the communication subsystem through a rigorous modeling approach based on a formal concurrency model, the operation state machine (OSM). Our OSM-based modeling methodology enables the entire system including both the computation and communication architectures to be modeled in a single OSM framework. This allows us to develop a tool set that can synthesize cycle-accurate system simulators for multiprocessing-element SOC prototypes. We show that, by simulation, critical system information such as timing and communication patterns can be obtained and evaluated. Consequently, system-level design choices regarding the communication architecture can be made with high confidence in early stages of design.     

Research on the Distant Hybrids of Wheat Obtained via Low-Energy Ion-Beam Implantation

Abstract The whole DNA of soybean was implanted into four varieties of wheat of Zhongyu5, Huaiyin 9628, Wenyou 1, Jimai 5 respectively via ion-beam mediation. There were 5 plantsobtained whose protein content was higher than 18.5%, the highest one was 21.44%. There were 3plants obtained whose protein content was lower than 11.5%, the lowest one was 10.96%. We cansee that the whole DNA of soybean transformed into wheat via ion beam implantation can inducethe increase in wheat protein content dramatically. The result also shows that the transformationefficiency of different gene types of wheat receptor varies greatly that the implanting time has acertain effect on the efficiency of transformation.     

Generalized null space uncorrelated Fisher discriminant analysis for linear dimensionality reduction

We propose a generalized null space uncorrelated Fisher discriminant analysis (GNUFDA) technique integrating the uncorrelated discriminant analysis and weighted pairwise Fisher criterion. The GNUFDA can effectively deal with the small sample-size problem and perform satisfactorily when the dimensionality of the null space decreases with increase in the number of training samples per class and/or classes, C. The proposed GNUFDA can extract at most C-1 optimal uncorrelated discriminative vectors without being influenced by the null-space dimensionality.