Isotopic signature and impact of car catalysts on the anthropogenic osmium budget

Higher osmium concentrations and lower 187Os/188Os ratios in sediments from urban areas have been linked to anthropogenic osmium sources. Automobile catalytic converters that use platinum group metals (PGM) are a potential source for this Os pollution. We present the first direct Os concentrations and isotopic measurements of catalytic converters for major automobile brands to test the assumption that car catalysts release Os with a distinct signature in the environment. The analysis of four new catalytic converters yields similar low 187Os/188Os ratios (0.1-0.2), suggesting a similar source for the PGM. The Os concentrations measured are in the ppt range (6-228 ppt). From our results, the osmium contribution of the car catalysts to the environment through attrition (wearing and grinding down of the catalyst by friction) is predicted to be low, <0.2 pg Os/m2/year in highly urbanized environment. We show that Os loss from catalysts as volatile OsO4 is important at car catalyst operating temperatures. Moreover, we estimate that car catalysts may be responsible for up to approximately 120 pg Os/m2 deposited per year in urban areas and that part of it may be exported to sedimentary sinks. Car catalytic converters are thus an important anthropogenic osmium source in densely populated areas. The NIST car catalyst standard (SRM-2557, made from recycled used catalysts) yields higher concentrations (up to 721 ppt Os) and a more radiogenic isotopic composition (approximately 0.38), perhaps indicative of Os contamination during its preparation.     

Glucosinolates in isaño (Tropaeolum tuberosum) tubers: qualitative and quantitative content and changes after maturity

Six varieties of isaño (Tropaeolum tuberosum), an Andean edible tuber, were analysed. The aim was to characterise qualitatively and quantitatively their content of glucosinolates and to determine concentration changes of these compounds upon delayed harvest. Additionally, exploratory assays were carried out on the effect of postharvest cold storage of the tubers as well as of a drying process imposed on blanched tuber slices. Only one glucosinolate (p‐methoxybenzyl glucosinolate) was found in the six domestic varieties analysed. Its concentration varied between 36.5 and 90.0 µmol g^?1 dry matter. This range is relatively high when compared with other edible glucosinolate‐containing vegetables. ‘Dark’ coloured tuber varieties showed higher levels than ‘light’ coloured tuber varieties at normal harvest time. Of the two varieties on which the effect of delayed harvest was studied, one showed increasing and then decreasing changes until 44 days after maturity, while the other did not show any significant change with time. Postharvest cold stored samples showed similar changes to tubers kept in soil, and glucosinolate levels in dried blanched tubers did not differ significantly from those in fresh samples. Taken together, the data indicate that the glucosinolate content of isaño is highly dependent on both the variety and the time of harvest. These parameters should be taken into account when considering isaño as a promising food source with medicinal properties for humans and animals, but also with possible adverse biological effects, all related to the presence of glucosinolates. Copyright © 2004 Society of Chemical Industry     

élaboration et validation du Questionnaire de Soutien Conjugal (QSC).

Although partner support represents a significant source of help amongst people (Beach, Fincham, Katz, & Bradbury, 1996; Cutrona, 1996), few valid and reliable measures of couple support are available. The current study presents the elaboration and validation of the “Questionnaire de soutien conjugal” (QSC), a brief measure evaluating given and received support within conjugal relationship. A sample of 270 French-Canadian couples completed the QSC and a short version of the Dyadic Adjustment Scale (Spanier, 1976; Sabourin, Valois, & Lussier, 2005). One year later, 160 couples agreed to complete the same measures again. Exploratory Factor Analyses supported the two-factor structure of the measure (provided support and received support); those factors predicted current and future couple satisfaction. QSC scales also showed good internal consistency as well as good test–retest reliability after a 1-year period. These findings reveal satisfactory psychometric properties and justify the QSC's use in clinical settings and research protocols. Strengths, limitations, and recommendations for futures research are discussed. (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

Modelling of isothermal austenite grain growth in a Si‐Mn TRIP steel ‐ experimental and calculation

Using the theory described in the preliminary publication, the isothermal grain growth of a low carbon, silicon‐manganese bearing TRIP‐steel has been studied. The austenitic grain size was established through the measurement of the mean linear intercept distance, which has been transformed into the real mean austenite grain size. A general model of the form dⁿ=d₀ⁿ+K₁t exp(K₂/T) was used and the coefficients n, K₁ and K₂ have been statistically determined. It has been demonstrated that for low annealing temperatures the value of n is situated around 6, whereas at high temperatures n rapidly drops and adopts a value of 2. This behaviour was related to the dissolution of the precipitates present in the austenitic matrix during the soaking treatments. The model delivers very good predictions for soaking temperatures up to 1200 °C. For higher temperatures, the deviations between the predicted grain size and the really measured one are higher.     

Ultra-shallow raised p+−n junctions formed by diffusion from selectively depositedIn-situ doped Si0.7Ge0.3

In this paper, a novel raised p⁺−n junction formation technique is presented. The technique makes use ofin- situ doped, selectively deposited Si_0.7Ge_0.3 as a solid diffusion source. In this study, the films were deposited in a tungsten halogen lamp heated cold-walled rapid thermal processor using SiCl₂H₂, GeH₄, and B₂H₆. The microstructure of the Si_0.7Ge_0.3 layer resembles that of a heavily defected epitaxial layer with a high density of misfit dislocations, micro-twins, and stacking faults. Conventional furnace annealing or rapid thermal annealing were used to drive the boron from thein- situ doped Si_0.7Ge_0.3 source into silicon to form ultra-shallow p⁺−n junctions. Segregation at the Si_0.7Ge_0.3/Si interface was observed resulting in an approximately 3:1 boron concentration discontinuity at the interface. Junction profiles as shallow as a few hundred angstroms were formed at a background concentration of 10¹⁷ cm⁻³.     

Adhesion improvement of polyester/aluminium interface by plasma polymerization pretreatments

Plasma polymerizations (PP) of acrylic acid (AA) and methacrylic acid (MAA) on polyester were used to improve the adhesion of the polyester/aluminium interface. It was found that this adhesion measured by the peel test method is 5-10 times higher than in the case of untreated polyester. Comparisons of the X-ray photoelectron spectroscopy (XPS) results obtained from the treated polyester, the untreated polyester and the reference spectra of poly(acrylic acid) cast from H₂O suggest that the observed adhesion improvement can be explained in terms of the formation of new functionalities at the polyester surface.     

Self‐Assembled pH‐Sensitive Fluoromagnetic Nanotubes as Archetype System for Multimodal Imaging of Brain Cancer

Fluoromagnetic systems are recognized as an emerging class of materials with great potential in the biomedical field. Here, it is shown how to fabricate fluoromagnetic nanotubes that can serve as multimodal probes for the imaging and targeting of brain cancer. An ionic self‐assembly strategy is used to functionalize the surface of synthetic chrysotile nanotubes with pH‐sensitive fluorescent chromophores and ferromagnetic nanoparticles. The acquired magnetic properties permit their use as contrast agent for magnetic resonance imaging, and enable the tracking of tumor cell migration and infiltration responsible for metastatic growth and disease recurrence. Their organic component, changing its fluorescence attitude as a function of local pH, targets the cancer distinctive acidity, and allows localizing and monitoring the tumor occurrence and progression by mapping the acidic spatial distribution within biopsy tissues. The fluoromagnetic properties of nanotubes are preserved from the in vitro to the in vivo condition and they show the ability to migrate across the blood brain barrier, thus spontaneously reaching the brain tumor after injection. The simplicity of the synthesis route of these geomimetic nanomaterials combined with their demonstrated affinity with the in vivo condition strongly highlights their potential for developing effective functional materials for multimodal theranostics of brain cancer.     

Functionality of high and low voltage electrically stimulated beef chilled under moderate and rapid chilling regimes

Chuck muscles from 24 beef carcasses electrically stimulated (ES) with either high or low voltage, or a combination of both, and submitted to conventional or rapid chilling regimes were used in a model system study (pH, salt-solubloe protein extraction, emulsifying capacity) and in frank-further fabrication and analysis (yield, color, texture). Glycolytic rates measured in the loin had no effects on the functional parameters or on the quality of frankfurters. The ultimate pH values of unstimulated carcasses remained higher than in any ES carcasses, and led to higher protein extraction (P ≤ 0·05). However, ES had no further influence on the emulsifying capacity or on frankfurter yield and quality parameters independently of the voltage used (P > 0·05). Chilling regimes had no influence on the functional parameters of the model system but slightly influenced the yield and chewiness of the frankfurters (P ≤ 0·05). Therefore, the use of any type of ES in combination with either conventional (Canadian) or more rapid chilling is unlikely to have commercial significance on the yield or quality of frankfurters.     

Telomerization of Butyl Methacrylate and 1‐Octadecanethiol by Reactive Extrusion

Butyl methacrylate and 1‐octadecanethiol telomers were prepared by radical reactive extrusion. The main advantages of the use of this processing technique are that mass reactions can be conducted and continuous production is achieved within a reduced reaction time and a correct temperature control. Preliminary studies concerned the choice of the reactants for the telomerization reaction and the adaptation of the telomerization reaction to the reactive extrusion process. The transfer constant to C₁₈H₃₇SH was measured, and then experimental studies were conducted to verify that the hypothesis and approximations made for kinetic modeling are realistic. Particularly, it was shown that the use of relatively high chain‐transfer agent to monomer concentration ratio had no perceptible effect on the monomer conversion kinetic. These results allowed the choice of reactive extrusion conditions. Telomers were prepared using a laboratory co‐rotating twin‐screw extruder. The effect of reaction conditions (temperature, 1‐octadecanethiol to monomer concentration ratio) and of processing conditions (throughput, screw rotation speed) on the residence time distributions, molar mass and monomer conversions were examined. This study allowed the continuous synthesis of butyl methacrylate telomers having variable controlled molar masses and complete monomer conversion.

Screw profile used in reactive extrusion telomerization.