冷冻交联制备ZM-CSt-PVA复合凝胶及吸附Cu2+性能

以两性离子单体二甲氨基丙基丙烯酰胺-1-羧酸(ZM)、木薯淀粉(CSt)和聚乙烯醇(PVA)为主要原料,采用"一锅法",通过冷冻交联制备ZM接枝共聚CSt-PVA互穿网络复合凝胶(ZPG2)。使用FTIR、TGA、POM、SEM-EDS对ZPG2进行了表征,评价了ZPG2对Cu~(2+)的静态吸附效果。结果表明:300℃以下,ZPG2的热稳定性良好;ZM的存在可产生反聚电解质效应和化学配位效应,显著提高凝胶吸附能力;在吸附温度25℃、ZPG20.1 g、Cu~(2+)质量浓度2×10~3 mg/L、溶液体积100 mL时,饱和吸附量为199 mg/g;吸附过程符合Langmuir等温吸附模型和准二级动力学模型。     

Ni/Al_2O_3覆膜方法

阐述了Ni/Al2 O3 复合颗粒在生产中的应用 ,讨论了在Al2 O3 陶瓷颗粒上形成Ni膜的三种方法 ,分析了这些方法的优缺点。     

大单体参与的分散聚合

~~大单体参与的分散聚合@陈永春$湖北大学化学与材料科学学院!武汉,430062 @易昌凤$湖北大学化学与材料科学学院!武汉,430062 @曹红燕$湖北大学化学与材料科学学院!武汉,430062 @冯伟程$湖北大学化学与材料科学学院!武汉,430062 @时远$湖北大学化学与材料科学学院!武汉,430062~~~~~~     

混合纤维制品在制瓶玻璃窑供料道上的应用

叙述了用多晶氧化铝纤维和高铝纤维制成的混合纤维段制品的生产工艺。该制品是一种能在１３５０℃长期使用的隔热新材料，它用在全电加热玻璃窑供料道后，玻璃液温度稳定，料滴温度长期控制精度可达±１℃，成品率上升到９６．６％，能耗降低。     

景德镇青白瓷起源与发展的探讨

景德镇是宋元时期青白瓷的产地代表。本文分析了景德镇早期青白瓷的胎釉化学组成与同时期景德镇青瓷和白瓷化学组成之间的关系，以及与其制瓷原料化学组成之间的联系；探讨了宋元时期青白瓷胎、釉配方的发展及显微结构的差异。结果表明，青白瓷可能起源于五代白瓷的烧制，并在其后的生产过程中不断改进坯釉料配方，成品率和质量不断得以提高。     

Atom transfer radical polymerization of n‐butyl methacrylate in an aqueous dispersed system

Atom transfer radical polymerization of n‐butyl methacrylate (BMA) was conducted in an aqueous dispersed system with different kinds of copper complexes. The partitioning behavior of the copper complexes, including CuCl/4,4′‐di(5‐nonyl)‐2,2′‐bipydine (dNbpy), CuCl₂/dNbpy, CuCl/2,2′‐bipydine (bpy), CuCl₂/bpy, CuCl/bis(N,N′‐dimethylaminoethyl)ether (bde), and CuCl₂/bde between the monomer (BMA), and water was studied in detail with ultraviolet‐visible spectroscopy. The results show that with a less hydrophobic ligand, such as bpy or bde, most of the Cu(I) or the Cu(II) complexes migrated from the BMA phase to the aqueous phase, the atom transfer equilibrium was destroyed, and the polymerization was nearly not controlled; it converted to classical emulsion polymerization. As to the very hydrophobic ligand dNbpy, although the partitioning study of the copper complexes indicated that not all the copper species were restricted to the organic phase, the linear correlation between the molecular weight and the monomer conversion and the narrow polydispersities confirmed that the polymerization was still quite well controlled. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3175–3179, 2003     

考虑土体强度参数深度依赖性的非平稳随机场边坡滑动深度和体积分析

基于随机有限元方法（RFEM）和Monte-Carlo模拟,建立了能够模拟具有深度依赖性的土体强度参数边坡或具有软弱夹层边坡的非平稳随机场模型。通过辐射扫描方法获取最危险滑动面,得到非平稳随机场边坡滑动深度和滑动体积。将该方法与均质边坡和平稳随机场边坡获得的滑动深度和滑动体积进行对比,研究土体强度参数深度依赖性的非平稳随机场边坡的不同坡度和各向异性对滑动深度和滑动体积的影响。结果表明：基于RFEM的非平稳随机场滑动深度和滑动体积结果为地质灾害风险及后果评估提供了一个参考分析的新角度;参数的深度依赖性程度越高(变化率b越大),则边坡平均滑动深度和滑动体积越小;在大坡度滑坡风险后果评估中,可以基于均质边坡分析结果进行初步预估;在非平稳随机场中,随着各向异性的增大,所有坡度边坡的滑动体积变异系数增大;不同坡度下,水平方向的相关程度越大,则土坡内软弱夹层的不确定性越强,滑动体积的变异系数也不断增大。     

Contrastive Meta-learning on Heterogeneous Information Networks for Cold-start Recommendation

In recommender systems, the cold-start issue is challenging due to the lack of interactions between users or items. Such an issue can be alleviated via data-level and model-level strategies. Traditional data-level methods employ auxiliary information like feature information to enhance the learning of user and item embeddings. Recently, Heterogeneous Information Networks (HINs) have been incorporated into the recommender system as they provide more fruitful auxiliary information and meaningful semantics. However, these models are unable to capture the structural and semantic information comprehensively and neglect the unlabeled information of HINs during training. Model-level methods propose to apply the meta-learning framework which naturally fits into the cold-start issue, as it learns the prior knowledge from similar tasks and adapts to new tasks quickly with few labeled samples. Therefore, we propose a contrastive meta-learning framework on HINs named CM-HIN, which addresses the cold-start issue at both data level and model level. In particular, we explore meta-path and network schema views to describe the higher-order and local structural information of HINs. Within meta-path and network schema views, contrastive learning is adopted to mine the unlabeled information of HINs and incorporate these two views. Extensive experiments on three benchmark datasets demonstrate that CM-HIN outperforms all state-of-the-art baselines in three cold-start scenarios.     

认识隐患预防事故

事故隐患是客观存在的，不论你是否承认，是否意识到，它都存在于企业的生产全过程，而且对员工的人身安全，国家的财产安全和企业的生存、发展都直接构成威胁。正确认识隐患的特征，对熟悉和掌握隐患产生的原因，及时研究并落实防范对策是十分重要的。下面就这方面的问题，谈一点粗浅认识。     

蓝色氧化锆陶瓷的研制

以微米或纳米氧化锆粉体为主原料,钒锆蓝色料或Co3O4为着色剂,添加适量烧结助剂制备蓝色氧化锆陶瓷。研究了氧化锆、助剂、着色剂等对蓝色氧化锆陶瓷颜色及性能的影响。结果表明:用纳米级ZrO2粉体为原料,钒锆蓝色料为着色剂,添加少量烧结助剂,可制得性能优良、颜色亮丽的蓝色氧化锆陶瓷;用纳米级ZrO2为原料,Co3O4为着色剂,添加少量烧结助剂,可制得性能优良、颜色亮丽的钴蓝色氧化锆陶瓷。