基于FLUENT软件的管式搅拌反应器流场的数值模拟

运用商业计算流体力学(CFD)软件FLUENT对一种新型管式搅拌反应器进行流场模拟,用GAMBIT建立流场实体模型,采用标准k-ε湍流模型以及多重参考系法(MRF)处理搅拌桨区.结果表明,计算所选模型能较准确地预测搅拌反应器的速度场、压力场及湍流动能分布,考察流量为1 m3/h时不同搅拌转速对反应器内部混合的影响,此时对应的最佳搅拌转速为50 rpm左右.模拟结果将为实验研究提供适当的操作参数,对搅拌反应器的优化和放大具有一定参考价值.     

动态汽车衡测量结果的不确定度评定

本文主要介绍了在动态汽车衡的试验过程中不确定度来源,并以动态试验为例重点介绍了计算各分量的标准不确定度、合成标准不确定度以及扩展不确定度的方法.     

摩擦焊在钢制实心抽油杆修复中的应用

通过对焊接工艺及焊后热处理工艺优化，采用摩擦焊接技术对报废抽油杆中仍有使用寿命的杆头与杆体进行了拼接，获得了性能达标的抽油杆。从而提高了旧杆的修复率．降低了采油成本。该技术可在抽油杆修复及相关行业进行推广应用。     

SU-8 3D microoptic components fabricated by inclined UV lithography in water

Out-of-plane microlenses and microoptical fiber holder are two of the most important components for building an integrated microoptic system with a precise alignment accuracy. In this paper, a simple and convenient method to fabricate these components from SU-8 by using inclined UV lithography in water is proposed. It consists of two perpendicular exposures in SU-8 at ±45°. DI water possesses a low absorption coefficient and a moderate and stable value of refractive index in near UV. Using water, the exposure angle in SU-8 can be increased to 50° from 35° in air necessary to pattern the desired 45° slope of the sidewalls. The principle of the proposed technique and the detailed fabrication process of the microoptic components will be presented. The integratability of the fabricated components was demonstrated by the fabrication of the microoptical fiber holder with a pre-aligned out-of-plane microlens.     

哈得逊隆起下石炭统基准面旋回与储集层预测

依据基准面旋回原理和方法,综合利用哈得逊地区的钻井、测井、地震以及地球化学资料,在研究区下石炭统识别出1个Ⅰ型和3个Ⅱ型层序界面,将哈得逊地区下石炭统划分为3个中期基准面旋回：SC1、SC2、SC3,对应于早石炭世海侵的3个海进-海退旋回.SC1旋回以滨岸砂坝沉积为主,而SC2、SC3旋回发育潮坪沉积体系.研究认为,SC1旋回滨岸砂岩及SC2下降半旋回的潮间带薄层砂岩为有利储集砂体,是地层-岩性型油气藏的重点勘探目标.     

一台循环流化床锅炉U型二次分离的改进对过热器爆管的影响

文章通过对一台循环流化床锅炉U型二次分离装置的改进，减少了过热器爆管的介绍，给出了采用多次离心分离技术，改善和提高烟尘分离效率，从而改善过热器外部工作条件，达到减少爆管发生的措施，相应提出了一些有关的建议。     

Ring‐opening polymerization of D,L‐lactide by rare earth 2,6‐dimethylaryloxide

Ring‐opening polymerization of D,L ‐lactide (LA) has been successfully carried out by using rare earth 2,6‐dimethylaryloxide (Ln(ODMP)₃) as single component catalyst or initiator for the first time. The effects of different rare earth elements, solvents, monomers and catalyst concentration as well as polymerization temperature and time on the polymerization were investigated. The results show that La(ODMP)₃ exhibits higher activity to prepare poly(D,L ‐lactide) (PLA) with a viscosity molecular weight of 4.5 × 10⁴ g mol^?1 and the conversion of 97 % at 100 °C in 45 min. The catalytic activity of Ln(ODMP)₃ has following sequence: La > Nd > Sm > Gd > Er > Y. A kinetic study has indicated that the polymerization is first order with respect to both monomer and catalyst concentration. The apparent activation energy of the polymerization of LA with La(ODMP)₃ is 69.6 kJ mol^?1. The analyses of polymer ends indicate that the LA polymerization proceeds according to ‘coordination–insertion’ mechanism with selective cleavage of the acyl–oxygen bond of the monomer. Copyright © 2004 Society of Chemical Industry     

均匀设计法分析制备过程对钴钼硫化物催化剂机械强度的影响

建立了CoMoP/Al2O3加氢精制催化剂机械强度及其可靠性在制备过程中的数学模型,采用均匀设计考察了浸渍、干燥、煅烧、硫化4个制备过程中,浸渍时间、干燥温度、干燥时间、煅烧温度、煅烧时间、硫化温度和硫化升温速率7个实验因子对催化剂强度均值、Weibull模量的影响,同时考察了这些因素对颗粒密度的影响。方差分析表明所有模型都是充足的。实验结果表明,硫化过程是影响催化剂强度均值的主要过程。在实验范围内提高硫化温度、降低硫化时的升温速率有利于提高催化剂的强度。影响催化剂Weibull模量的因素主要为各个制备过程的交互效应。要提高催化剂强度的可靠性就必须全面考虑催化剂制备的各个过程,特别是各个制备过程的交互效应。     

化灰系统的几项改造

对化灰工序设备的改进、改造的一些原因及效果情况分别进行了分析介绍。