聚合物多元醇产品质量的影响因素与控制

从内在和外在质量两个方面，简要论述了影响聚合物多元醇(POP)产品质量的因素和控制产品质量的措施。     

电石包装桶中乙炔气处理简述

电石在远距离运输过程中，受潮湿，生成乙炔气，遇明火燃烧或发生爆炸。对从业人员造成巨大危害。如何处理包装桶中的乙炔气成为电石产业的物流运输瓶颈。我公司在原来包二化比较实用的氮气置换基础上，逐渐形成了成熟的可使200KG大桶和100KG小桶中各种粒度电石包装桶中乙炔气浓度有效降低的出口电石质量控制体系。     

Studies on multilayer film coextrusion III. The rheology of blown film coextrusion

Multilayer blown film coextrusion was studied, both experimentally and theoretically. For the experimental study, an annular die with a feed-port system was designed and multilayer blown films were produced by rotating the inner mandrel with a one horsepower variable-speed drive at speeds from nearly 2 to 6 rpm, and by inflating the tubular molten film with air. The die has 16 feed slots and melt pressure transducers are mounted along the axial direction of the outer wall of the annular flow channel. The transducers were used to determine the pressure gradient in the annular flow channel, which then permitted determination of the reduction in pressure drop when different combinations of two polymer systems were coextruded. Polymers used for b own film coextrusion were: (1) low-density polyethylene with ethylene-vinyl acetate; (2) low-density polyethylene with high-density polyethylene; (3) low-density polyethylene with polypropylene; (4) high-density polyethylene with ethylene-vinyl acetate. For the theoretical study, stratified helical flow was analyzed using a power-law non-Newtonian model. A computational procedure was developed to predict the number of layers, layer thickness, and the volumetric flow rate as functions of certain processing variables (namely, the pressure drop in the die, and the angular speed of rotation of the inner mandrel of the die) and the rheological parameters of the individual polymers concerned. Comparison was made of the theoretical prediction of volumetric flow rate with experimental ones. Some representative results are presented of the theoretically predicted axial and angular velocity distributions, shear stress profiles, and shear rate profiles.     

Precise localization of eye centers with multiple cues

Automatic detection and precise localization of human eye centers are the essential processes in photo related multimedia applications. Since eye center points are used as reference base points for further intelligent processing, precise eye center localization is very important. In face recognition the accuracy of localization of eye centers directly influences the identification accuracy. A multiple stage approach with multiple cues for detection and precise localization of eye centers is presented in this paper. Multiple scopes searching strategy is used for correctly extracting eye patch images from the background. Dedicated gradient based features and curvelet based features are constructed and used for comprehensively revealing the intensity distribution characteristics and the edge based texture around eye centers. A rebuilt score calculation mechanism is proposed and the rebuilt scores are used as a specific measurement index reflecting the matching accuracy. The final localizations of eye centers are determined with integrating the gradient based scores and curvelet based scores. The experiment results testing on public face datasets show that the localization accuracy of proposed approach outperforms the accuracy with other state of the art methods.     

Decentralized weighted control for a class of large‐scale systems with multi‐modes

In this paper, the control synthesis problem for a class of large‐scale systems with multi‐modes that are called large‐scale switched systems is addressed. By introducing the concept of decentralized switching signal and the relevant decentralized average dwell time, the asymptotic stability and weighted ?₂ gain performance are investigated. It should be noted that the decentralized switching covers general switching cases for large‐scale switched systems, namely, it admits both time‐dependent switching signal and arbitrary switching signal blended in the decentralized switching. Then, on the basis of the analysis results, the decentralized weighted control scheme including state feedback controller gains and switching signals is studied. Several design algorithms are proposed to meet different controller design problems. Finally, numerical examples are provided to illustrate theoretical findings within this paper. Copyright © 2013 John Wiley & Sons, Ltd.     

Interbay物料自动搬运系统性能分析

Interbay物料自动搬运系统的运行效率对于晶圆制造系统影响较大,研究Interbay物料自动搬运系统的绩效具有较大的意义[1]。该文以带有捷径的单闭环背脊式布局的物料自动搬运系统为研究对象,通过问题描述,简化、假设将实际问题抽象为导引运输模型。然后,建立数学模型,采用Dijkstra算法确定工件搬运的最短路径。最后,利用Arena仿真软件建立含有导引运输设备的模型,采用控制变量法探究小车数量小车占用轨道的方式、调度规则等因素对于产出的影响,发现对于本文中的模型,其它条件相同时,搬运系统采用Release-at-end的控制方式,系统最大搬运量越大。     

胶层厚度对拉伸试样应力分布影响的数值分析

运用弹塑性有限元法研究了胶层厚度对承受拉伸载荷的对接接头胶层内应力分布的影响．三维有限元法数值分析的结果表明，随胶层厚度减小，胶层中正应力SZ与剪应力SYZ的分布趋于均匀；而对正应力SY而言，胶层厚度为0．15mm时，其边缘峰值应力最低。     

"团队项目训练法"在市场营销实践教学中的应用——以"与爱同行"营销策划综合训练为例

“团队项目训练法”是充分利用各种市场资源,按照市场营销工作实际,让学生自组团队、自寻商机、自设项目,理论联系实际分析营销环境．对真实对象进行市场营销方案设计、实施、评估,亲历市场营销的完整过程,以此进一步掌握理论,训练技能,提高能力。介绍了重庆科技学院对市场营销专业本科生运用“团队训练法”进行实践教学的做法及效果。     

Preparation of micro-patterned surfaces of Si-N-O films and their influence on adhesion behavior of endothelial cells

Microgrooves were prepared on Si(100) surface by photolithography and wet etching.Subsequently,Si-N-O films were deposited on the microgrooves by unbalanced magnetron sputtering(UBMS) and micro-patterned surfaces of Si-N-O films were obtained.The size of the micropatterns was measured by surface profilometer.The chemical composition of Si-N-O films were characterized by X-ray photoelectron spectrometry(XPS) and the wettability of the micropatterned surfaces was evaluated by contact angle measurement.The beh...     

新型醋酸乙烯聚合引发剂的研究

采用新型引发剂过氧化二月桂酰对醋酸乙烯聚合进行研究,通过研究它在聚合过程中的分解速率常数、半衰期等性能,得出过氧化二月桂酰的分解速率常数大,半衰期与偶氮二异丁腈相似,并且产物不含有毒物质,因此它的应用范围可以更加广泛。讨论了引发剂质量、甲醇质量、反应时间对醋酸乙烯转化率和聚合度的影响。建立正交试验得到醋酸乙烯聚合的最佳工艺条件。