A time domain approach for avoiding crosstalk in optical blockingmultistage interconnection networks

Crosstalk in multistage interconnection networks can be avoided by ensuring that a switch is not used by two connections simultaneously, in order to support crosstalk-free communications among N inputs and N outputs, a space domain approach dilates an N×N network into one that is essentially equivalent to a 2N×2N network. Path conflicts, however may still exist in dilated networks. This paper proposes a time domain approach for avoiding crosstalk. Such an approach can be regarded as “dilating” a network in time, instead of space. More specifically, the connections that need to use the same switch are established during different time slots. This way, path conflicts are automatically avoided. The time domain dilation is useful for overcoming the limits on the network size while utilizing the high bandwidth of optical interconnects. We study the set of permutations whose crosstalk-free connections can be established in just two time slots using the time domain approach. While the space domain approach trades hardware complexity for crosstalk-free communications, the time domain approach trades time complexity. We compare the proposed time domain to the space domain approach by analyzing the tradeoffs involved in these two approaches     

隧道工程施工中应注意的问题

通过对海南省东线高速公路大茅山隧道施工的全程监理,阐明了在施工中应重点注意的几个问题,在此基础上,总结出隧道工程质量监督中必须做到的几点,以确保隧道工程施工安全及工程质量.     

尼龙6/改性双马来酰亚胺共混物的制备

将尼龙6与改性双马来酰亚胺熔融共混形成合金以提高其热稳定性能.用转矩流变仪考察了尼龙6/改性双马来酰亚胺共混体系熔融反应过程中的流变行为,用TG-DSC测试了共混物的热性能.结果表明:熔融共混时,2组分间的化学反应进行很快,改性双马来酰亚胺用量增加,共混物的熔融粘度增大,温度或转速升高,平衡转矩降低;改性双马来酰亚胺可明显改善尼龙6的高温热稳定性能,当尼龙6与改性双马来酰亚胺的质量比为20/1时,共混物在236-340℃温度范围内有很好的热稳定性.     

Compatibility between Polyamide 6 and Polycarbonate

Polyamide （PA6） and polycarbonate （PC） were prepared by a Brabender mixer （ PLV- 151） at 240℃ with 30 rpm for duration of 8 and 6 minutes respectively. The epoxy resin （E） addition can lead to substantial microstructural changes in the PA6/PC blends. Scanning electron microscope （SEM） was used to observe the mixtures characterized by the domains of clearly segregated homophases and voids between the two polymers. PA6/PC of polyamide 6 and polycarbonate with epoxy resin addition under the composition ratio of 20/80, 20/80/1, 40/60/1 and 40/60, were tested to verify the key role of epoxy in promoting the compatibility of PA6 with PC during blending.     

Matlab软件在分形几何上的应用

以Koch曲线和塞尔平斯基三角形为例,介绍了Ma tlab软件在分形几何方面,对不规则图形进行直观描绘的方法。     

杀菌剂异螺环-4-烯-2,3-5''''-氯-吲哚的合成

研究了以薯蓣皂素(diosgenin)为原料,根据活性叠加原理,在分子中引入一个新的活性基团吲哚环,合成了全新化合物异螺环-4-烯-2,3-5'-氯-吲哚.杀菌药效试验结果表明:所设计的全新目标化合物具有原料所没有的杀菌活性.     

Design of the ECRH/ECCD Launcher System for HL-2A Tokamak

An ECRH/ECCD system with two 68GHz/500kW/1S gyrotrons will be built up in HL-2A tokamak. The location of the Gaussian beam waist is 580 mm away from the center of the plasmas and the beam radius is 37 mm at the center of the plasmas. Compared to the minor plasma radius （420 mm）, it is small enough for localized control. The launcher system covers a wide toroidal and poloidal steering range by the two steering plane mirrors. Therefore it is possible to explore the on- and off-axis heating over half of the plasma minor cross section and the co-current drive.     

溶液温度对电化学沉积氧化亚铜薄膜相成分和显微结构的影响

用电化学方法在不锈钢基体上沉积多晶Ｃｕ２Ｏ薄膜并用Ｘ射线衍射和扫描电进行了分析研究了溶液温度对薄膜相组成、晶粒尺寸和择优取向的影响，当溶液的ＰＨ＝９，温度低于５０℃时得到的是Ｃｕ２Ｏ／Ｃｕ复相薄膜，纯Ｃｕ２Ｏ薄膜可在溶液温度高于５０℃时获得，纯Ｃｕ２Ｏ薄膜具有（１００）择优取向，实验发现薄膜的晶粒尺寸随溶液温度的增加从０．１２μｍ增加到０．６５μｍ。