基于S3C2410的VoD系统构建

介绍了一种基于三星公司的S3C2410处理器、开源Linux操作系统的VoD系统构建方案。详细介绍了嵌入式Linux系统的构建,qt/embedded开发环境的建立,主控界面的编写以及应用程序的移植。实验证明,构建的系统能够稳定、流畅地播放视频,具有一定的实用价值。     

基于DSP的固态放大链控保系统设计

固态放大链控保系统承担着雷达功率放大系统工作状态和技术参数的监视、调节、控制和保护任务。本文分别从硬件和软件两个层次,描述了基于TMS320F28335型数字信号处理器和EPM1270T14416硬件可编程逻辑器件的雷达固态放大链控保系统的设计和实现,深入地阐述了硬件系统结构,以及功率衰减控制、调制脉冲保护和功放双工切换的软件实现。目前,该控保系统已在多种型号雷达的固态放大链中得到成功应用。     

中红外光谱和分层抽样法应用于野生菌的快速鉴别

应用傅里叶变换红外光谱技术结合分层抽样法对4种牛肝菌进行鉴别研究。分别测试了4种牛肝菌99个样品的FTIR光谱,结果表明其主要成分为蛋白质、多糖等物质。它们的光谱特征极其相似,难以从表观上直接对其鉴别,利用分层抽样法对它们原始光谱与一阶导数光谱进行相似度比较,给出的匹配结果表明,原始光谱的匹配结果反映了未知样品鉴别的正确率达到了98%,而一阶导数光谱匹配正确率达到了100%。因此,傅里叶变换红外光谱结合分层抽样可以快速、方便地对不同种野生蕈菌进行鉴别分类,为大型的蕈菌系统正确分类提供了一种潜在的方法。     

基于粒子群优化的传感器预分配方法

针对实时传感器管理算法的局限,在深入分析传感器管理问题本质特征的基础上,提出一种传感器静态预分配方案。然后,以低轨星座目标连续跟踪为应用背景,提出一种基于修正粒子群优化的传感器预分配方法。仿真实验表明,所提方法虽然需要较长时间的静态分配过程,但是其实时运算效率明显高于实时传感器管理算法,因而给上层系统设计留下更多富余时间。      

Cooperative Communication Based on Spectrum Aggregation in LTE Further Evolution

The implementation of wide band radio transmission may occur in two parallel ways:designing a new system with larger bandwidth,or constructing a cooperative system based on existing systems.The former is a spectrum aggregation scheme based on multi-carrier transmission within one system,while the latter fulfills spectrum aggregation based on multi-carrier transmission among systems.On the one hand,the advantage of the multi-carrier transmission scheme within a system and among systems is that the existing R...     

浅谈WAP的应用

WAP（Wireless Application Protocol）是无线应用协议,是一个为实现新的移动业务而定义的语言,通信协议及工具的集合。阐述了WAP的一些内容及经典的WAP结构模型,介绍了一些WAP服务器的连接模型,并对将来WAP服务器的应用作了简要的概述。     

Correlation between Interfacial Oxides and Electrical Characteristics of GaN Schottky Diodes

The electrical characteristics of GaN schottky diode with and without the interracial oxides are compared in this paper. The influence of interracial oxides on the electrical characteristics of the schottky diodes has been confirmed by the I-V, C-V measures. We find the barrier height have a reduction of 0.05 eV- 0.1 eV. There is an interracial insulating oxide with the thickness of 0. 05 nm- 0. 1 nm after conventional cleaning. Either the forward or the backward currents increase. The backward punch through voltages are reduced to 50% and the capacitances have increased by 100%.     

基于智能夹层的复合材料柔性蒙皮变形测量研究

探索变体机翼蒙皮拉伸变形测量的可行性,对波纹式复合材料蒙皮的变形测量方法进行研究。通过新配方制作了波纹式蒙皮试件,对其进行力学拉伸试验,分析蒙皮的力学性能。制作模块化的智能夹层,对安装在蒙皮上的智能夹层输出特性进行测试,并与直接粘贴在蒙皮表面的应变片输出特性进行对比分析。结果表明:通过新配方制作的柔性蒙皮线弹性范围达到0~7%;在蒙皮线弹性范围内智能夹层能有效测得应变数据,其应变灵敏系数相对于应变片由2.08降至1.84;由应变反推的蒙皮伸长量与实际伸长量较吻合。     

LSI低成本制备Cf/SiC复合材料工艺研究

采用一次性液相硅浸渍法(LSI)制备低成本的Cf/C-SiC复合材料。以PAN基平板碳毡为增强体,在酚醛树脂溶液中添加碳化硅微粉,探讨添加碳化硅浓度、浸渍压力及保压时间等因素对一次液相浸渍效果的影响。通过显微分析,当压力为1.2 MPa,浸渍时间为60 min时,可以获得最大的致密度,最终复合材料密度达2.64 g/cm3。     

Large S-section-ring-cavity diode lasers: directional switching, electrical diagnostics, and mode beating spectra

Semiconductor lasers with monolithically integrated ring cavities exceeding 1 cm in perimeter were fabricated and characterized optically and electrically. Directional switching was observed, influenced by S-section seeding of unidirectional operation. The lasing threshold was identified by differential current-voltage measurements, which are also shown to be useful in monitoring directional switching. Mode beating was observed at three radio-frequency bands: 7.6, 15.2, and 22.9 GHz.