AVR单片机的串口转FSK的通信模块设计

以AVR单片机ATmega48芯片及CMX865调制／解调芯片为硬件架构规范了对外串口通信协议,采用模拟口线的方式对CMX865寄存器进行操作,设计了一种串口转FSK的通信模块,实现数据传输方式的转换。硬件电路以AT—mega48微处理器为核心,并利用C／BUS总线控制CMX865芯片,实现FSK／DTMF收、发功能;...     

Detection of heterogeneous samples based on loaded generalized inner product method

Non-homogeneity detector (NHD) is known for improving the detection performance of space time adaptive processing (STAP) in heterogeneous environment. To mitigate the finite sample effect in the generalized inner product (GIP) based NHD, a new type of GIP detector based on diagonal loading (LGIP) is proposed in this paper. We derive the theoretical mean value of LGIP detector based on random matrix theory. Moreover, an approximation of the theoretical mean value is provided for practical considerations. We then apply the derived theoretical mean value of LGIP to the detection of heterogeneous samples. Finally, by theoretical analysis and numerical simulations, we show the effectiveness of the proposed detector.     

Influence of base resistance on extracting thermal resistance for SiGe HBTs

In this article, the influence of base resistance on extracting thermal resistance for SiGe heterojunction bipolar transistors is studied and an improved approach for determining the junction temperature and thermal resistance is presented. The proposed method for extracting thermal resistance is based on the temperature sensitivity of the base–emitter (B–E) voltage when the device is biased with a fixed emitter current density. This approach not only takes into account the self‐heating during the different ambient temperature measurement but also revises the empirical equation of B–E voltage due to the influence of base resistance during the power dissipation increment measurement. Results are obtained for devices with different emitter lengths and fingers. Compared with the conventional method, the thermal resistance is about up to 15% improvement for the device with 0.3 × 1.9 μm² emitter area and 13.8% for the device with 0.3 × 13.9 μm² emitter area. The accurate thermal resistance implemented in HICUM model has resulted in better fit for transistor output characteristics. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2012.     

Extension of the DEMATEL method in an uncertain linguistic environment

The decision making trial and evaluation laboratory (DEMATEL) method is a useful tool for analyzing correlations among factors using crisp values. However, the crisp values are inadequate to model real-life situations due to the fuzziness and uncertainty that are frequently involved in judgments of experts. The aim of this paper is to extend the DEMATEL method to an uncertain linguistic environment. In this paper, the correlation information among factors provided by experts is in the form of uncertain linguistic terms. A formula is first presented to transform correlation information from uncertain linguistic terms to trapezoidal fuzzy numbers. Then, we aggregate the transformed correlation information of each expert into group information using the operations of trapezoidal fuzzy numbers. The importance and classification of factors are determined via fuzzy matrix operations. Furthermore, a causal diagram is constructed to vividly show the different roles of factors. Finally, an example is used to illustrate the procedure of the proposed method.     

低负荷维氏硬度法的负荷选择

本文按照维氏硬度测定的技术条件,将基本公式H_v=1854P/D~2加以变换,从而得到一些较为简单的数学关系式.利用这些关系式,可以对不同金属薄带材料,很容易计算出较合理的负荷大小,既能保证不被"打穿",也使视场内有一个适合观测的压痕图象.     

基于Newsvendor型产品特性的FJSP问题研究

针对新时代环境下Newsvendor型产品销售期短、期末未出售产品价值递减的产品特点,生产链要求位于上游的供应商必须快速加工出所需的工件,否则将面临着线性递增的拖期惩罚。在面对基于Newsvendor型产品的柔性作业车间调度问题时,设计了一种加入禁忌搜索的混合遗传算法,扩大了解的搜索范围,避免了传统遗传算法容易陷于局部最优的缺陷。最后利用混合遗传算法对一个仿真案例进行求解。     

Web Server的嵌入式实现与交互式设计

本文简要介绍了PowerPC硬件平台和基于CentOS的嵌入式Web Server软件架构。分别给出了嵌入式Web Server应用体系结构、主要任务、选型,交互式原理中的两个过程,详尽地分析了GoForms过程与动态信息的XML文件交互。系统通过长时间测试,能够快速设置、查询,而且运行稳定。     

38毫米催泪子母弹增程设计及弹道仿真

在子母弹射程优化控制问题的研究中,射程是武器系统重要战术性能指标,增加射程可有效提高武器作战性能.在分析子母弹射程、弹丸初速及装药量三者关系的基础上,针对38毫米催泪子母弹发射器出口速度较低导致的实际射程较近(＜100米)及无法达到预期战术技术指标的问题.由于传统发射器出口初速度低,性能差.为此提出用数字仿真的方法,在MATLAB上进行弹道模型仿真,仿真出子母弹的弹道曲线.仿真结果表明,在保持药室容积不变的情况下,增加装药量,可提高子母弹初速,进而增大射程.通过计算机仿真射弹过程中的大量随机因素,相当于在计算机上打靶,所得结果具有较高的可信度和精度.以某型38毫米催泪子母弹为实例,结果表明,方法精确、简单实用,可为子母弹射程优化设计提供参考.     

分布式计算环境中的协同分配任务调度仿真系统

协同分配是在分布式计算环境中进行资源分配的一种重要技术,用于把一个应用程序分解为多个子作业,然后将其分配到多个资源上同时处理来满足特定的性能要求。本文提出了一个离散事件驱动的网格资源协同分配仿真系统,实现了对用户、调度器、协同分配器、协同预留器等协同分配相关实体的仿真,实现了FCFS、FPFS、Backfill等主要的协同分配调度算法和策略,可用于资源协同分配相关的分布式计算环境的资源管理和调度算法的仿真和研究。     

支持多种闪存启动的U-Boot实现方法的改进

标准的U-Boot目前不支持从NAND Flash启动,而现有的修改U-Boot实现从NAND Flash启动的方法无法识别新的大页NAND Flash,也没有进行坏块检测。针对上述问题,提出获取NAND Flash页大小和块大小信息的通用方法,并实现了坏块检测功能。此外,对现有的上电后自动识别系统是从NOR还是从NAND Flash启动的方法进行了改进。将U-Boot-2010.09修改并移植到基于S3C2440A处理器的mini2440开发板上,运行结果表明,实现了U-Boot从NOR和NAND Flash的双启动,扩展了U-Boot的功能。