Modelling study of an upflow microbial fuel cell catalysed with anaerobic aged sludge

An electrochemical model for an upflow dual-chambered microbial fuel cell (MFC) process is proposed in this study. The model was set up on the basis of the experimental results and the analysis of biochemical and electrochemical processes in the MFC biocatalysed with anaerobic aged sludge and alternatively fuelled with a synthetic acetate-based and actual domestic wastewaters. Simulation of the process shows that the model describes the process reasonably well with correlation coefficients higher than 0.97. The analysis of model simulation illustrates how the current output depends mainly on the substrate concentration as well as other main variables. The relationship between the current output and over-voltage is revealed by the modelling study. For acetate-based wastewaters with initial chemical oxygen demand (COD) concentrations of 350, 700, 1050, and 1400 mg/L, maximum observed power densities were 290, 405, 448, and 525 mW/m² associated with maximum COD removals of 84%, 88%, 83%, and 82%, respectively.     

Synthesis and characterization of poly(methacrylates) containing spiroacetal and norbornene moieties in side chain

A four‐step synthetic strategy was applied to achieve novel methacrylic monomers. 5‐Norbornene‐2,2‐dimethanol was prepared from a Diels–Alder reaction of cyclopentadiene and acrolein, followed by the treatment of the adduct with an HCHO/KOH/MeOH solution. The resulting 1,3‐diol (1) was then acetalized with different aromatic aldehydes having OH groups on the ring to produce four spiroacetal derivatives. The reaction of methacryloyl chloride with the phenolic derivatives led to four new methacrylic monomers that were identified spectrochemically (mass, FTIR, ¹H‐NMR, and ¹³C‐NMR spectroscopy). Free radical solution polymerization was used to prepare novel spiroacetal–norbornene containing polymethacrylates, which were characterized by FTIR and ¹H‐NMR spectroscopy and differential scanning calorimetry and thermogravimetric thermal analysis. Gel permeation chromatography was performed to determine molecular weight averages and polydispersity. The polymethacrylate having naphthalenic nuclei was recognized to be the highest molecular weight polymer (M̄_n = 12144, η_inh = 0.80 dL/g) with the highest thermal stability. All the polymers showed good solubility in a variety of common organic solvents. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 30–38, 2000     

Solution of Algebraic Lyapunov Equation on Positive-Definite Hermitian Matrices by Using Extended Hamiltonian Algorithm

This communique is opted to study the approximate solution of the Algebraic Lyapunov equation on the manifold of positive-definite Hermitian matrices. We choose the geodesic distance between -AHX - XA and P as the cost function, and put forward the Extended Hamiltonian algorithm (EHA) and Natural gradient algorithm (NGA) for the solution. Finally, several numerical experiments give you an idea about the effectiveness of the proposed algorithms. We also show the comparison between these two algorithms EHA and NGA. Obtained results are provided and analyzed graphically. We also conclude that the extended Hamiltonian algorithm has better convergence speed than the natural gradient algorithm, whereas the trajectory of the solution matrix is optimal in case of Natural gradient algorithm (NGA) as compared to Extended Hamiltonian Algorithm (EHA). The aim of this paper is to show that the Extended Hamiltonian algorithm (EHA) has superior convergence properties as compared to Natural gradient algorithm (NGA). Upto the best of author’s knowledge, no approximate solution of the Algebraic Lyapunov equation on the manifold of positive-definite Hermitian matrices is found so far in the literature.     

Xenon-ion irradiation of Co/Si bilayers: Effects of interface structure and ion energy

Heavy-ion irradiation of ferromagnetic thin layers changes their micromagnetic and microstructural properties, due to the production of defects, relaxation or build-up of stress, or changes of grain size. When the ion range exceeds the layer thickness, ion mixing processes take place, leading to the formation of silicide phases. The present study deals with Co(30 or 55 nm)/Si bilayers irradiated at room temperature with 100- or 200 keV Xe ions to fluences of up to 15 × 10¹⁵/cm². The Si(1 0 0) wafers were either crystalline or pre-amorphized by 1 keV Ar⁺ implantation. Rutherford backscattering spectroscopy, in-plane magneto-optical Kerr effect, and X-ray diffraction served to analyse the samples before and after irradiation. The results will be compared with those obtained for other heavy-ions for Co/Si bilayers and in similar studies on Fe/Si bilayers.     

Confined growth of Ag2S semiconductor nanocrystals in the presence of PDMAEMA-co-AA polyampholyte co-polymer

Silver sulfide (Ag₂S) nanoparticles were synthesized in the presence of poly(2-(dimethylamino)ethyl methacrylate-co-acrylic acid) co-polymer. It was shown that this polyampholyte can stabilize the growth of the Ag₂S in solution which resulted in formation of nanoparticles with relatively narrow size distribution. The obtained nanoparticles were characterized with structural and optical methods. The results showed that their average size depended on the number of acrylic acid units along the polymer chains.     

The influence of hydroxide on the initial stages of anodic growth of TiO2 nanotubular arrays

Understanding the mechanism for growing TiO(2) nanotubes is important for controlling the nanostructures. The hydroxide nano-islands on the Ti surface play a significant role at the initial stage of anodization by forming the very first nano-pores at the interface between hydroxide islands and substrate and eliminating the H(2)O electrolysis. A quantitative time dependent SEM study has revealed a nanotube growth process with an initial linear increase of pore diameter, film thickness and number of pores. During the anodization of titanium, different current transient curves are observed for Ti samples with or without hydroxide on the surface. The transient current profile has been quantitatively analyzed by fitting several distinctive stages based on a growth mechanism supported by SEM observations. It is found that a saturated cubic dependent equation is appropriate to fit a short current upturn due to the increase of the surface area.     

New Type Anode for Calcium Ion Batteries Based on Silicon Carbide Monolayer

Silicon - A theoretical research study was conducted into the possibility of using a two-dimensional graphene-like material silicon carbide nano-sheet (2D-SiCNS) as an anode in rechargeable Ca-ion...     

Probing the intrinsic optical quality of CVD grown MoS<Subscript>2</Subscript>

Optical emission efficiency of two-dimensional layered transition metal dichalcogenides (TMDs) is one of the most important parameters affecting their optoelectronic performance.The optimization of the growth parameters by chemical vapor deposition (CVD) to achieve optoelectronic-grade quality TMDs is,therefore,highly desirable.Here,we present a systematic photoluminescence (PL) spectroscopic approach to assess the intrinsic optical and crystalline quality of CVD grown MoS2 (CVD MoS2).We propose the use of the intensity ratio between the PL measured in air and vacuum as an effective way to monitor the intrinsic optical quality of CVD MoS2.Low-temperature PL measurements are also used to evaluate the structural defects in MoS2,via defect-associated bound exciton emission,which well correlates with the field-effect carrier mobility of MoS2 grown at different temperatures.This work therefore provides a sensitive,noninvasive method to characterize the optical properties of TMDs,allowing the tuning of the growth parameters for the development of optoelectronic devices.     

Chitosan/CNTs nanocomposite as green carrier material for pesticides controlled release

Chitosan-based nanocomposites containing gamma-treated carbon nanotubes (CNTs) were developed for controlled release of pesticide. The CNTs were irradiated under gamma irradiation in air at different doses. The transmission electron microscopic images of gamma-treated CNTs showed disentanglement of the tubes without distorting their tubular structure which effectively increased the dispersion properties of CNTs in nanocomposites. X-ray diffraction analysis of CNTs showed some structural changes, and an irradiation dose of 150 kGy is the most effective. Azinphos methyl (AZM) was selected as a model drug, and its release was studied using HPLC technique. Controlled release response of CNTs-based nanocomposites opens a new avenue for pesticides applications because it requires less quantity of pesticides. As a result, the side effects of pesticide in our environment are minimized.