Performance Evaluation of Sleep Mode on Power Saving in WiMAX IEEE 802.16m and LTE DRX

Power saving represents a vital role in mobile communications networks such as IEEE 802.16m and LTE. Modern user equipment (UE_s) require high data rates and low power consumption. It is found that arranging sleep mode mechanisms ensures UE battery longer lifetime. In this paper, different sleep mode mechanisms are investigated for both IEEE 802.16m and LTE networks. The analyses are based on Markov and Semi-Markov chains. It is focused on the determination of UE transition state. Web traffic model parameters were considered in MATLAB simulation and a comparison assessment was conducted between WiMAX IEEE 802.16m and LTE DRX. It was found that LTE DRX sleep mode provides more power saving than WiMAX IEEE 802.16m sleep mode. The study is now implemented for 5G networks with encouraging results.     

Design of bandpass–bandpass diplexers using rectangular-, T-, and L-shaped resonators for hybrid power amplifier and 5G applications

Analog Integrated Circuits and Signal Processing - In this paper, two bandpass–bandpass diplexers, based on L-, T- and rectangular-shaped resonators are designed and analyzed, which are used...     

Progressive Compression of 3D Mesh Geometry Using Sparse Approximations from Redundant Frame Dictionaries

In this paper, we present a new approach for the progressive compression of three‐dimensional (3D) mesh geometry using redundant frame dictionaries and sparse approximation techniques. We construct the proposed frames from redundant linear combinations of the eigenvectors of a combinatorial mesh Laplacian matrix. We achieve a sparse synthesis of the mesh geometry by selecting atoms from a frame using matching pursuit. Experimental results show that the resulting rate‐distortion performance compares favorably with other progressive mesh compression algorithms in the same category, even when a very simple, sub‐optimal encoding strategy is used for the transmitted data. The proposed frames also have the desirable property of being able to be applied directly to a manifold mesh having arbitrary topology and connectivity types; thus, no initial remeshing is required and the original mesh connectivity is preserved.     

A new design approach for dual‐band patch antenna serving Ku/K band satellite communications

A printed planar antenna with simple and intelligent geometrical structure has been proposed for Ku/K band satellite communication systems. The radiating patch of the antenna is formed by cutting rectangular slots and extending the radiating element to some extent. The final design of the antenna with optimized parameters is fabricated on ceramic–polytetrafluoroethylene substrate materials of dielectric constant ε_r = 10.2. The antenna is excited through a microstrip feed line and has reduced ground plane that covers only the non‐radiating portion of the antenna. The reduced complexity of the antenna is easy to fabricate and has overall dimension of 40 × 35 × 1.905 mm³. The results from experimental analysis show that the proposed antenna can guarantee a wide bandwidth of 12.0 to 16.4 GHz at lower band, and the upper band covers the frequency in the range of 17.53 to 19.5 GHz. The antenna has achieved appreciable gain in the range of 3.14 to 4.68 dBi for lower band and 2.03 to 3.65 dBi for upper band. The proposed antenna has offered almost symmetrical and directional radiation pattern that is essentially suitable for serving Ku/K band satellite applications. Copyright © 2015 John Wiley & Sons, Ltd.     

Low end‐to‐end delay fuzzy networking protocol for mobile wireless sensing

Because of the practical limitations of the energy and processing capabilities, the deployment of many Wireless Sensor Networks (WSN) is facing two main challenges of increasing network lifetime and reducing End to End Delay (EED) which become critical when the nodes are mobile and use non‐rechargeable energy sources. One way to help to extend network lifetime is using fuzzy logic in a form of artificial intelligence. To this end we propose a new routing protocol for using mobile WSNs, which holds the nodes in an equal level of energy and decreases energy dissipation of the network. An optimum path is selected based on the cost of each node to increase network lifetime. In order to lessen EED, we also attempt to design a novel zoning‐scheme for the network area. In this scheme, zonation is dynamic and works based on the Data Link (DL) position. The simulation result shows a significant improvement in lifetime and EED by proposed protocol compared with existing protocols. Copyright © 2016 John Wiley & Sons, Ltd.     

A tungsten-trioxide/prussian blue complementary electrochromic cell with a polymer electrolyte

Optically variable windows (smart windows), which control the transmission of light into buildings and vehicles, are of interest both for the control of solar heat load and for privacy applications. Such windows are likely to utilize electrochromic technology to achieve optical control. An electrochromic device consisting of a cathodically colouring tungsten trioxide (WO₃) film, an anodically colouring Prussian blue (PB) film, and a polymer electrolyte was made. The polymer electrolyte was prepared from polyvinyl alcohol doped with H₃PO₄ and KH₂PO₄ to accommodate the conduction of both H⁺ and K⁺ ions. The electrochromic WO₃ and PB films functioned in a complementary way such that the device was coloured or bleached by the application of –0.5 V or +0.5 V (WO₃ films vs PB film), respectively. The spectral characteristics of the coloured device confirmed the complementary colouration of WO₃ and PB in the device.     

Copper activated LiF nanorods as TLD material for high exposures of gamma-rays

Lithium fluoride (LiF) doped with proper activators is a highly sensitive phosphor commonly used for radiation dosimetry using thermoluminescence (TL) technique. Nanorods of this material activated with Cu, Mg and P as single dopants are synthesized in our laboratory and exposed to gamma-rays for their thermoluminescence (TL) properties. The induced TL glow curves of the Cu, Mg and P doped samples are similar with a single peak at 410 K. Copper doped sample is found to be the most sensitive sample with TL intensity around 65, 7 and 8 times of those of LiF:Mg, LiF:P and LiF:Mg,Cu,P, respectively, indicating that Cu is the luminescence center in the host of LiF nanorods, while Mg and P act as TL quencher particularly when used as codopants. These observations on the nanostructured form of LiF doped with these activators are entirely different from those of the widely studied LiF:Mg,Cu,P and LiF:Mg,Ti single crystals. The nanorods of LiF:Cu might be used for heavy doses measurement as they are sensitive to gamma-rays and have a linear TL response curve in a long span of exposures.     

Parallel query execution over encrypted data in database-as-a-service (DaaS)

The Journal of Supercomputing - The main challenge in database-as-a-service is the security and privacy of data because service providers are not usually considered as trustworthy. So, the data...