Processor control in computerized data-acquisition systems

A method is proposed for detecting single and double processor errors during arithmetic and logicaloperations with reduced time consumption.     

Coatings against corrosion and microbial adhesion

A systematic study on anti‐corrosion and anti‐fouling effect of hydrophobic Langmuir–Blodgett and self‐assembled molecular layers deposited on metal surfaces, as well as anti‐microbial adhesion properties of coatings with biocide is presented. Both types of efficiencies produced by LB films are enhanced by Fe³⁺ ions built in the molecular film. The quaternary ammonium type biocide embedded into the cross‐linked gelatin decreased significantly the microbial adhesion, the biofilm formation.     

Comparison of Performance of Packet Scheduling Algorithms in LTE-A HetNets

The concept of usage of heterogeneous networks (HetNets) is about improving the LTE system performance by increasing the capacity and coverage of the Macro cell. In this paper, a performance comparison of various packet scheduling algorithms such as Proportional Fair, Maximum Largest Weighted Delay First and Exponential/Proportional Fair is studied in detail in the HetNets environment. The key performance indicators such as throughput, packet loss ratio, delay and fairness are considered to judge the performance of the scheduling algorithms. Various strategies such as increasing the number of Pico cells in the cell edge were used in the simulation for the performance evaluation study. The results achieved through various simulations show that adding Pico cells to the existing Macros enhances the overall system performance in addition to the various scheduling algorithms implemented in Macros. For reader’s convenience, various types of graphs have been used to represent the simulation results to better understand the performance metrics of various scheduling algorithms. Simulation results shows that overall system gain has increased because of adding Picos and thereby providing better coverage in the cell edge areas and thereby increasing the capacity of the network to provide better quality of service.     

Spin effects in magnetoresistance induced in an <Emphasis Type="Italic">n</Emphasis>-In<Subscript>x</Subscript>Ga<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>As/GaAs double quantum well by a parallel magnetic field

Magnetoresistance in n-In_xGa_1?xAs/GaAs (x ≈ 0.18) heterostructures with double quantum wells (DQWs) was studied in the magnetic field parallel to the DQW layer. Specific features of the magnetoresistance, related to the passing of the tunnel gap edges across the Fermi level, are revealed and studied. Agreement between the calculated and experimental positions of the observed features is obtained when the spin splitting of the energy spectrum is taken into account. Earlier, similar features were observed in the magnetoresistance of n-GaAs/Al_xGa_1?xAs DQW heterostructures, but the spin effects did not manifest themselves.     

Video Server Technology and Application

随着计算机技术的飞速发展,硬盘技术应用在电视领域作为存储媒介早已使用,视频服务器就是一个典型的应用。 在电视领域中,视频服务器不但可用于节目制作,如节目编辑、动画创作,还可用于节目的播出,从而真正实现制播网络化,同时还带来了信息共享,消除了录像机格式选择的烦恼。 用视频服务器实现播出,国内电视台在96年就作了一些尝试,当时受技术等条件限制, 系统的可靠性、软件开发等方面还不尽如人意。随着近几年硬盘技术的成熟,以及硬件厂商和国内软件开发商的激烈竞争,视频服务器应用已经非常广泛。使用硬盘实现节目播出自动化的优点早已被大家公认。在播出系统中,硬盘的存储容量已不再是争论的焦点,人们早已把精力放在硬盘系统的安全性(如数据备份方式、自动检测自动修复等)、软件开发(如多功能、制播联网等)实用性方面,使系统更智能化、人性化。 本专题报告会主要向大家介绍近些年视频服务器主要硬件厂商在产品开发方面的动态、国内软件开发商研发经历以及国内使用单位采用硬盘播出系统的经验。     

Ag Nanowire Reinforced Highly Stretchable Conductive Fibers for Wearable Electronics

Stretchable conductive fibers have received significant attention due to their possibility of being utilized in wearable and foldable electronics. Here, highly stretchable conductive fiber composed of silver nanowires (AgNWs) and silver nanoparticles (AgNPs) embedded in a styrene–butadiene–styrene (SBS) elastomeric matrix is fabricated. An AgNW‐embedded SBS fiber is fabricated by a simple wet spinning method. Then, the AgNPs are formed on both the surface and inner region of the AgNW‐embedded fiber via repeated cycles of silver precursor absorption and reduction processes. The AgNW‐embedded conductive fiber exhibits superior initial electrical conductivity (σ₀ = 2450 S cm^?1) and elongation at break (900% strain) due to the high weight percentage of the conductive fillers and the use of a highly stretchable SBS elastomer matrix. During the stretching, the embedded AgNWs act as conducting bridges between AgNPs, resulting in the preservation of electrical conductivity under high strain (the rate of conductivity degradation, σ/σ₀ = 4.4% at 100% strain). The AgNW‐embedded conductive fibers show the strain‐sensing behavior with a broad range of applied tensile strain. The AgNW reinforced highly stretchable conductive fibers can be embedded into a smart glove for detecting sign language by integrating five composite fibers in the glove, which can successfully perceive human motions.     

Transmit antenna selection of correlated MIMO multiuser cognitive radio networks in Nakagami‐m fading channels

In this paper, we examine the impact of antenna correlation on transmit antenna selection with receive maximal ratio combining (TAS/MRC) in multiple‐input multiple‐output multiuser underlay cognitive radio network (MIMO‐MCN) over a Nakagami‐m fading environment. The secondary network under consideration consists of a single source and M destinations equipped with multiple correlated antennas at each node. The primary network composed of L primary users, each of which is equipped with multiple correlated antennas. For the considered underlay spectrum sharing paradigm, the transmission power of the proposed secondary system is limited by the peak interference limit on the primary network and the maximum transmission power at the secondary network. In particular, we derive exact closed‐form expressions for the outage probability and average symbol error rate of the proposed secondary system. To gain further insights, simple asymptotic closed‐form expressions for the outage probability and symbol error rate are provided to obtain the achievable diversity order and coding gain of the system. In addition, the impact of antenna correlation on the secondary user ergodic capacity has been investigated by deriving closed‐form expressions for the secondary user capacity. The derived analytical formulas herein are supported by numerical and simulation results to clarify the main contributions. Copyright © 2016 John Wiley & Sons, Ltd.     

Error Performance of DQPSK with EGC Diversity Reception over Fading Channels

This paper derives the average bit error probability (BEP) of differential quaternary phase shift keying (DQPSK) with postdetection equal gain combining (EGC) diversity reception over independent and arbitrarily correlated fading channels. First, using the associated Legendre functions, the average BEP of DQPSK is analyzed over independent Rayleigh, Nakagami-m, and Rician fading channels. Finite-series closed-form expressions for the average BEP of DQPSK over L-branch independent Rayleigh and Nakagami-m fading channels (for integer Lm) are presented. Besides, a finite-series closed-form expression is given for the average BEP of differential binary phase shift keying (DBPSK) with EGC over independent Rician fading channels. Second, an alternative approach is propounded to study the performance of DQPSK over arbitrarily correlated Nakagami-m and Rician fading channels. Relatively simple BEP expressions in terms of a finite sum of a finite-range integral are proposed. Moreover, the penalty in signal to noise ratio (SNR) due to arbitrarily correlated channel fading is also investigated. Finally, the accuracy of the results is verified by computer simulation.     

Efficient Self‐Assembly Synthesis of Uniform CdS Spherical Nanoparticles‐Au Nanoparticles Hybrids with Enhanced Photoactivity

The treatment of environmental pollution has become one of the most critical issues in the world. Despite the progress made in the study of semiconductor photocatalysis, it is still a challenge to obtain photocatalysts with high activity through relatively simple fabrication processes. In this work, monodisperse CdS spherical nanoparticles (SNPs) of various sizes and good crystallinity are obtained by only adjusting the starting ratio of reactants and the reaction temperature, exhibiting high photocatalytic performances. The photocatalytic rate constant of the ≈ 100 nm CdS SNPs, especially, is more than double that of P25. Furthermore, 3‐mercaptopropyltrimethoxysilane is used to assist the interaction between ≈ 200 nm CdS SNPs and citrate‐stabilized Au nanoparticles (NPs). The significant increase of photocatalytic activity is confirmed by the degradation of Rodamine B (RhB) under Xe light irradiation. At the optimal Au concentration (0.5 wt%), the prepared nanohybrids show the highest photocatalytic activity, exceeding that of pure CdS two times. The superior photocatalytic performances of the CdS SNPs‐Au nanohybrids can be attributed to the intimate interfacial contact between CdS SNPs and Au NPs, which is a contributing factor to the improvement of transfer and the fate of photogenerated charge carriers from CdS SNPs to Au NPs.     

Improvement of the cell performance in the ZnS/Cu(In,Ga)Se2 solar cells by the sputter deposition of a bilayer ZnO : Al film

ZnS is a candidate to replace CdS as the buffer layer in Cu(In,Ga)Se₂ (CIGS) solar cells for Cd‐free commercial product. However, the resistance of ZnS is too large, and the photoconductivity is too small. Therefore, the thickness of the ZnS should be as thin as possible. However, a CIGS solar cell with a very thin ZnS buffer layer is vulnerable to the sputtering power of the ZnO : Al window layer deposition because of plasma damage. To improve the efficiency of CIGS solar cells with a chemical‐bath‐deposited ZnS buffer layer, the effect of the plasma damage by the sputter deposition of the ZnO : Al window layer should be understood. We have found that the efficiency of a CIGS solar cell consistently decreases with an increase in the sputtering power for the ZnO : Al window layer deposition onto the ZnS buffer layer because of plasma damage. To protect the ZnS/CIGS interface, a bilayer ZnO : Al film was developed. It consists of a 50‐nm‐thick ZnO : Al plasma protection layer deposited at a sputtering power of 50 W and a 100‐nm‐thick ZnO : Al conducting layer deposited at a sputtering power of 200 W. The introduction of a 50‐nm‐thick ZnO : Al layer deposited at 50 W prevented plasma damage by sputtering, resulting in a high open‐circuit voltage, a large fill factor, and shunt resistance. The ZnS/CIGS solar cell with the bilayer ZnO : Al film yielded a cell efficiency of 14.68%. Therefore, the application of bilayer ZnO : Al film to the window layer is suitable for CIGS solar cells with a ZnS buffer layer. Copyright © 2012 John Wiley & Sons, Ltd.