Theophylline‐loaded pectin‐based hydrogels. I. Effect of medium pH and preparation conditions on drug release profile

In this study, a series of theophylline‐loaded calcium pectin gel films were prepared in three different Ca⁺² concentrations with three different methods for wound dressing applications. Drug release performance of the films were investigated in four different medium pH in order to mimic wound healing pH conditions. Hydrogel films were characterized by Fourier transform infrared spectroscopy, differential scanning calorimetry, scanning electron microscopy and atomic force microscopy. Their absorbency (fluid handling), swelling behavior, dehydration rate, dispersion characteristic, dressing pH determination, water vapor permeability, oxygen permeability, surface contact angle, flexibility, Shore A hardness, mean mass per unit area and thickness were determined. The effect of the hydrogels on wound healing was evaluated with an in vitro wound healing assay. After evaluating all data, we suggested that the hydrogel film prepared with swelling method using 7% or 10% crosslinker and dried at 26 °C is more suitable for controlled drug release process. We showed that between pH 3.25 and 7.12 the form of the hydrogel did not change, and drug release was continuous. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46731.     

Effects of different polymerization protocols on the degree of conversion of two dual‐cured core buildup composites polymerized by light‐emitting diode and halogen light‐curing units

The aim of study was to investigate the effects of various curing protocols with quartz–tungsten halogen (QTH) or light‐emitting diode (LED) light‐curing units on the degree of conversion (% DC) of two dual‐cured core buildup resin composites. Two dual‐cured core buildup resin composites, Clearfil Dc Core Automix (CLF) and Grandio Core Dc (GR), were selected. Specimens were exposed to the polymerization protocols as follows: there was immediate photoactivation or photoactivation delayed by 2 or 5 min by a QTH or LED source, and one group was allowed to chemically polymerize and served as a control (n = 6). The % DC of the specimens was determined with attenuated total reflectance–Fourier transform infrared spectroscopy. The GR samples polymerized with QTH for the 5‐min‐delayed photoactivation had higher % DC values than those self‐cured, and the Clearfil Dc Core Automix (CLF) samples with immediate or delayed curing protocols with halogen yielded higher % DC values than the samples that were chemically polymerized. The comparison of the two resin composites polymerized with halogen showed a higher % DC for CLF than for GR in the 2‐min‐delayed photoactivation. On the other hand, when they were cured with LED, the % DC values of GR significantly increased after the 2‐min‐delayed photoactivation. In light of the results, it might be stated that CLF polymerized with QTH, could be the better option. GR provided adequate chemical polymerization; therefore, it might be useful in areas in which light curing is not possible. Clinicians should consider the polymerization characteristics of dual‐cured resin composites. The use of different composites may require the modification of the application procedures recommended by the manufacturer. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40560.     

The sol–gel transition temperature of skim milk concentrated by microfiltration as affected by pH and protein content

This study aimed at determining sol–gel transition temperatures of microfiltered skim milk retentates for different protein levels (6, 8 and 10% (w/w)) and a wide pH range (native pH to 4.6) by means of small‐amplitude oscillatory shear rheology. For a pH of 5.4 to 5.0, the sol–gel transition temperatures decreased significantly with increasing protein content, which did not differ for pH 4.8 and 4.6. The sol–gel transition temperatures of retentates with 10% (w/w) protein at pH 5.4 and 4.6 were 58.4 °C and 10.9 °C, respectively.     

Inhibitory effects of selected pesticides on peroxidases purified by affinity chromatography

The objective of this study was to determine the in vitro inhibition effects of seven commonly used pesticides including 2,4-d-acid dimethylamine, fenoxaprop-p-ethyl, glyphosate isopropylamine, haloxyfop-p-methyl, cypermethrin, λ-cyhalothrin, and dichlorvos on the peroxidase purified from turnip (Brassica rapa L.) and black radish (Raphanus sativus L.) using 4-amino benzohydrazide affinity column chromatography. The purification factors for the turnip and black radish peroxidases were found to be 263.29-fold (with a yield of 12.89%) and 36.20-fold (with a yield of 6.90%), respectively. Among these compounds, λ-cyhalothrin showed the strongest inhibitory effect against turnip peroxidase (K_i: 1.23 × 10^?2 ± 0.21 × 10^?2 mM) as noncompetitive inhibition. On the other hand, cypermethrin demonstrated the highest inhibition effect against black radish peroxidase (K_i: 2.14 × 10^?2 ± 0.08 × 10^?2 mM) as competitive inhibition.     

Inactivation of Bacillus spores in batch vs continuous heating systems at sterilisation temperatures

This study was performed to assess the heat resistance of spores of Bacillus species in batch and continuous heating systems under commercial sterilisation conditions. Spores of thermophilic Bacillus smithii and mesophilic Bacillus amyloliquefaciens were found to be highly heat resistant in the batch system. They were able to withstand typical sterilisation temperatures. B. amyloliquefaciens showed tailing in the batch system and, before the onset of the tailing, a higher inactivation rate than in the continuous system at low temperatures. The reason for the tailing might be the presence of spore aggregates which are disrupted in the continuous system.