录像机无调整式数字伺服

本文介绍了用一个专用微处理器实现新型无调整式数字伺服系统,并在此基础上提出了一种新的磁鼓电机控制方法。     

Heat extraction efficiency of a concentric glass tubular evacuated collector

The results of detailed measurements and calculations of the properties of Sydney University/Nitto Kohki evacuated collector tubes have been used to develop a formula for the instantaneous heat extraction efficiency η of a collector panel incorporating the evacuated tubes. The instantaneous efficiency depends on ambient temperature, mean fluid temperature in the collector, solar flux and the design of the manifold used to extract heat from the glass absorber tubes. Manifold design determines the mean temperature difference between absorber tube surface and mean fluid temperature for given operating conditions, and strongly affects the efficiency η of a collector panel. Neither changes in the number of evacuated tubes per unit area of collector, nor variations in solar flux, significantly alter the efficiency decrement Δ η₀ associated with a particular manifold design. Calculated efficiencies agree well with experimental results for collector panels incorporating manifolds of various designs. The formula for efficiency η allows detailed analysis of the relative importance of various energy loss mechanisms in a collector.     

难熔金属与硬质材料进展─—从第十三届国际普兰西会议看发展动向（Ⅰ）

根据第十三届国际普兰西会议获得的信息，对国际上难熔金属、硬质合金、硬质材料和涂层技术等方面近几年来的研究和发展动态进行了综合评述。最后，提出了几点自己的看法。     

Stored energy analysis of Zn—5Al eutectic alloy in superplastic deformation

The stored energy and the energy release during SPD(superplastic deformation)of a Zn-5Al alloy were studied.The alloy after rolling process gains more stored energy,and the as-rolled speciment can obtain maximum elongation and minimum flow stress without hot loding treatment before SPD.Experimental results show that stroed energy release process is along with SPD process and is also an impetus to SPD.The as -rolled Zn-5Al alloy has 48J/mol stored energy which was measured with DSC(differential scanning calorimeter)and conforms well to the calcuated value.The as-rolled Zn-5Al alloy after SPD with an elongation of 2500% releases 112J/mol stored energy,Analysis shows that the strain rate is in direct ratio to the rate of stred energy release.     

添加微量铝对TS-2合成及苯酚羟基化的影响

以硅溶胶为硅源合成分子筛TS 2时 ,在溶胶制备过程中添加微量的铝 ,可以降低模板剂氢氧化四丁基铵 (TBAOH)的用量 ,当TBAOH/SiO2 降低到 0 .1以下时 ,仍然合成了性能优良的TS 2 ,而且用于苯酚过氧化氢羟基化反应过程中催化活性也大大提高。所得催化剂用XRD ,IR ,ICP进行了表征     

人口系统迁移过程的参数辨识及其仿真

本文以系统辨识为工具，提出了迁移过程定量研究的一种方法，即运用随机牛顿法于时变系统中以辨识模型迁移表参量，同时结合卡尔曼滤波技术辨识迁移过程中另一参数－总和迁移率，将这两者融为一体，形成了辨识迁移模型参量的递推算法。本文又借助微分方程的稳定性理论讨论了净迁移情形下的辨识算法的收敛性，给出算法收敛的一个充分条件。     

1.30μmDFB激光器组件的设计和制做及其工作原理

本文自行设计和制作了１．３０μｍＤＦＢ激光器组件的讨论了光隔离和光耦合原理。由于采用的激光器－光隔离器－光纤的一体化结构，大大增加了该组件的可用性。在实验中得到高达５５％的耦合效率。     

激光技术推广应用中安全防护问题

论述加强激光安全防护工作的紧迫性,介绍我国激光安全工作的进展,提出下一步工作建议。     

特种钢用结晶器铜管破裂原因分析

通过对某特钢厂破裂的结晶器铜管进行金相实验、扫描电镜和能谱分析,并结合结晶器的生产、使用及失效过程情况,综合受力分析,认为铜管破裂原因主要是环境介质硫渗入形成硫化物,在拉应力作用下,裂纹沿脆性质点扩展导致的破坏。