载体及反应条件对Pt/BaKL沸石催化剂芳构化性能的影响

研究了γ-Al_2O_3或SiO_2载体,以及反应条件对Pt/BaKL沸石催化剂芳构化性能的影响。发现经过碱化或负载Sn的γ-Al_2O_3作为载体,能够较好地保持该催化剂在正己烷芳构化反应中的高活性和高选择性,并有益于改善Pt/BaKL沸石催化剂的抗硫性能。     

葡萄糖电解氧化还原工艺研究

采用自制的无膜电解槽，对同时电解氧化还原葡萄糖生成葡萄糖酸和山梨醇的工艺进行了研究。所得到的最佳工艺条件为：葡萄糖浓度０．４ｍｏｌ／Ｌ，ｐＨ值１１，电流密度３Ａ／ｄｍ￣２。在此条件下电解１２ｈ，葡萄糖转化率可达９６．４％，葡萄糖酸产率８８％，山梨醇产率１０％。同时，考察了和Ｚｎ￣（２＋）加入以及ｐＨ值对电流效率的影响。     

锌基复合材料研究进展

评述了锌基复合材料的发展和研究概况,着重介绍了锌基复合材料的制备工艺和性能研究现状,最后对锌基复合材料的研究方向和应用前景提出了一些设想和展望。     

Structural and gas-sensing properties of nanometre tin oxide prepared by PECVD

A low-temperature plasma-enhanced chemical vapour deposition (PECVD) technique has been employed to produce ultrafine tin oxide powders. The structural features and phase transition of this material have been characterized using differential thermal analysis (DTA), thermogravimetric analysis (TGA), X-ray diffraction, infrared spectroscopy (IR) and transmission electron microscopy (TEM). The oxygen absorption behaviour and gassensing properties have been investigated by electron paramagnetic resonance (EPR), X-ray photoelectron spectroscopy (XPS) and electrical measurements. Thick film gas sensors made from such ultrafine SnO₂ powders yield better sensitivities than those of normal undoped SnO₂ gas sensors. A gas-sensing reaction mechanism is also proposed.     

话音ATM交换的实现─—ATM论坛电路仿真系列建议

近年来，随着ATM主干网络的建设和发展，研究ATM对现有通信业务的支持方式和适配技术是目前ATM技术研究的热点之一。话音ATM交换在降低话音通信成本和简化网络操作环境等方面提供了大量的技术手段，并且支持在单一网络环境中的多种综合业务传输。ATM论坛制定了电路仿真系列建议，话音ATM交换的技术已经基本成熟。文章通过对话音ATM交换在实现和优化方面的技术进行分析，并提出一种基于NativeModeATM的话音通信方式。     

油品浑浊原因分析及解决办法

针对油品浑浊问题，经多方查找，确定系油品中含有表面活性剂及微量水所致，提出了采用通入干燥的压缩风或氮气吹扫的解决措施。     

Development of temperature compensated high elongation resistance strain gauges for use up to 250°C

The paper describes the development and evaluation of temperature compensated high elongation resistance strain gauges for use from room temperature to 250°C. These gauges could be temperature-compensated on steels with coefficient of thermal expansion α = 11 ppm/°C. Thermal output within 250°C was about 1 μm/m/°C and maximum standard deviation of 5 gauges was 34 μm/m. Strain limit was > 4% at room temperature and at 250°C. Gauge factors of different strain ranges at R.T. and at 250°C are tabulated. Some applications are stated.     

The summary of researches on ADS in China

The conceptual study on the accelerator driven system (ADS) that lasted for about five years ended in 1999 in China. As one project of the National Basic Research Program of China (973 Program) in the energy domain, which is sponsored by the China Ministry of Science and Technology (MOST), a five-year-program of fundamental research of ADS physics and related technology was launched in 2000 and passed national review at the end of 2005. The China Institute of Atomic Energy (CIAE), the Institute of High Energy Physics (IHEP), the Institute of Heavy Ion Physics in Peking University (PKU-IHIP) and other institutions jointly carried out the research. The research activities were focused on HPPA physics and technology, reactor physics of external source driven sub-critical assembly, nuclear data base and material study. For HPPA, a high current injector consisting of an ECR ion source, LEBT and an RFQ accelerating structure of 3.5 MeV was built. In reactor physics study, a series of neutron multiplication experimental study has been carried out and still being done. The VENUS facility has been constructed as the basic experimental platform for neutronics study in ADS blanket. It’s a zero power sub-critical neutron multiplying assembly driven by external neutron produced by a pulsed neutron generator. The theoretical, experimental and simulation study on nuclear data, material properties and nuclear fuel circulation related to ADS is carrying on to provide the database for ADS system analysis. The main results on ADS related researches will be reported.     

Amorphous Ni---N---W film as a diffusion barrier between aluminum and silicon

The influence of nitrogen on the diffusion barrier properties of amorphous Ni---W films was studied. Nitrogen was introduced into the amorphous Ni---W film by co-sputtering nickel and tungsten in a premixed gas mixture of 90% Ar and 10% N₂, resulting in the formation of amorphous Ni₃₀N₂₁W₄₉ film. X-ray analysis indicates a detectable crystallization of the amorphous film after 30 min annealing in vacuum at 600°C, accompanied by the formation of W₂N, but backscattering spectrometry (BS) reveals a reaction with silicon only at about 725°C. The Schottky barrier height of this amorphous film on n-Si is stable for 30 min annealing up to at least 550°C. With an aluminum overlayer, BS indicates that an amorphous Ni₃₀N₂₁W₄₉ film effectively prevents the metallurgical interaction between aluminum and silicon for 30 min up to 600°C. The Schottky barrier height of that contact configuration is also stable up to at least 550°C, suggesting that amorphous Ni---N---W films have attractive features as diffusion barriers.     

溶胶-凝胶法制备磷钨酸-硅胶催化合成苹果酯

采用溶胶-凝胶法制备了一系列磷钨酸-硅胶催化剂(PW/SG),考察了该催化剂催化乙酰乙酸乙酯与乙二醇液相缩合制备苹果酯的反应性能。实验结果表明,PW质量分数为40%时的PW/SG催化剂表现出最佳的催化活性;40%PW/SG催化剂制备苹果酯的最佳工艺条件为:n(乙酰乙酸乙酯)∶n(乙二醇)=1∶1.2,催化剂用量占反应物质量的0.36%,带水剂环己烷用量占反应物体积的30%,反应温度383K,反应时间90min;在此条件下,乙酰乙酸乙酯的转化率可达95.5%,苹果酯的选择性大于97%;催化剂稳定性实验表明,经5次重复使用,40%PW/SG催化剂的活性基本保持不变,乙酰乙酸乙酯转化率稳定在95.0%左右。