Microwave-assisted solution synthesis,microwave sintering and magnetic properties of cobalt ferrite

A simple, soft, and fast microwave-assisted hydrothermal method was used for the preparation of nanocrystalline cobalt ferrite powders from commercially-available Fe(NO₃)₃?9H₂O, Co(NO₃)₂?6H₂O, ammonium hydroxide, and tetrapropylammonium hydroxide (TPAH). The synthesis was conducted in a sealed-vessel microwave reactor specifically designed for synthetic applications, and the resulting products were characterized by XRD, FE-SEM, TEM, and HR-TEM. After a systematic study of the influence of the microwave variables (temperature, reaction time and nature of the bases), highly crystalline CoFe₂O₄ nanoparticles with a high uniformity in morphology and size, were directly obtained by heating at 130?°C for 20?min using the base TPAH. Dense ceramics of cobalt ferrite were prepared by non-conventional, microwave sintering of synthesized nanopowders at temperatures of 850–900?°C. The magnetic properties of both the nanopowders and the sintered specimens were determined in order to establish their feasibility as a permanent magnet.     

A Fluorometric Enzymatic Assay for Quantification of Steryl Glucosides in Biodiesel

Steryl glucosides (SG) are common contaminants in biodiesel that form precipitates, which form and cause problems due to fouling during transport and storage. Therefore, their quantification is necessary to assess the quality of this fuel. The methods currently available for SG analysis require expensive instrumentation, need a previous concentration step by solid‐phase extraction (SPE) or are of limited use for the quantitative assessment. We developed an enzymatic method for SG quantification in biodiesel samples based on the hydrolysis of the glucoside catalyzed by a broadly specific beta glucosidase and the subsequent determination of the glucose released by the reaction. The method is non‐expensive, sensitive and was adapted to 96‐well format fluorescence plate reader, making it useful for the parallel assay of multiple samples. The enzymatic assay presented here represent a valuable tool for both quality control and the development of improved biodiesel production and purification procedures.     

Relationship between the passivation of TiO2 particles and LLDPE photodegradation: a comparison between bulk and surface impacts

The effect of the concentration of alumina (Al₂O₃) and silica (SiO₂) used to passivate titanium dioxide (TiO₂) particles on the photodegradation of plastic films containing these particles was investigated. The films were made of linear low-density polyethylene (LLDPE) containing four different types of passivated TiO₂ particles. The UV degradation of the films was evaluated for the surface and the bulk by measuring the physical and chemical changes as a function of time. The surface chemical and physical degradation effects were measured by ATR-FTIR and AFM, respectively. A statistical Gaussian adjustment was proposed to correlate the AFM depth profiles of the eroded surfaces of the films after the photodegradation process. The bulk physical effect was evidenced by the loss of mechanical properties in the films. The results showed that the higher the concentrations of Al₂O₃ are, the better the inhibition of the photodegradation of the LLDPE films. In this study, it was confirmed that the observed UV degradation effect correlated at both the surface and bulk levels. The results showed not only the reduction of the photodegradative effect as the passivation of the TiO₂ particles increased but also the possibility of using these particles as UV stabilizers of LLDPE films. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47026.     

Constituents and Pharmacological Activities of Myrcia (Myrtaceae): A Review of an Aromatic and Medicinal Group of Plants

Myrcia is one of the largest genera of the economically important family Myrtaceae. Some of the species are used in folk medicine, such as a group known as “pedra-hume-caá” or “pedra-ume-caá” or “insulina vegetal” (insulin plant) that it is used for the treatment of diabetes. The species are an important source of essential oils, and most of the chemical studies on Myrcia describe the chemical composition of the essential oils, in which mono- and sesquiterpenes are predominant. The non-volatile compounds isolated from Myrcia are usually flavonoids, tannins, acetophenone derivatives and triterpenes. Anti-inflammatory, antinociceptive, antioxidant, antimicrobial activities have been described to Myrcia essential oils, while hypoglycemic, anti-hemorrhagic and antioxidant activities were attributed to the extracts. Flavonoid glucosides and acetophenone derivatives showed aldose reductase and α-glucosidase inhibition, and could explain the traditional use of Myrcia species to treat diabetes. Antimicrobial and anti-inflammatory are some of the activities observed for other isolated compounds from Myrcia.     

An iron-based T 1 contrast agent made of iron-phosphate complexes: In vitro and in vivo studies

A new iron-based T ₁ contrast agent consisting of a complex of iron ions coordinated to phosphate and amine ligands (Fe_(phos) in short) has been characterized by spectroscopic and magnetic measurements. NMR relaxation studies showed r ₁ values to be dependent on the phosphate salt concentration, K₂HPO₄, present in the medium. r ₁ reaches a maximum value of 2.5 mM^?1 s^?1 for measurements carried out at 7 T and 298 K. ³¹P MRS, Mössbauer spectroscopy and magnetic measurements of Fe_(phos) solutions suggest paramagnetic Fe³⁺ ions present in the studied iron–phosphate complex. In vitro and in vivo toxicity experiments with C6 cells and CD1 mice, respectively, demonstrated lack of toxicity for Fe_(phos) at the highest dose tested in the MRI experiments (12 mM iron for C6 cells and 0.32 mmol iron/kg for mice). Finally, T ₁ weighted images of brain tumours in mice have shown positive contrast enhancement of Fe_(phos) for tumour afflicted regions in the brain.     

Simplified modeling strategies for surrogate validation with multivariate failure-time data

The linear mixed effects model has become a standard tool for the analysis of continuous hierarchical data such as, for example, repeated measures or data from meta-analyses. However, in certain situations the model does pose unavoidable computational problems. In the context of surrogate markers, this problem has appeared when using an estimation and prediction-based approach for the evaluation of surrogate endpoints. Convergence problems can occur mainly due to small between-trial variability or small number of trials. A number of alternative strategies has been proposed and studied for normally distributed data, but not such study has been conducted for other types of endpoints. The idea is to study if such simplified strategies, which always ignore individual level surrogacy, can also be applied when both surrogate and true endpoints are of failure-time types. It is shown via simulations that the 3 simplified strategies produced biased estimates, especially for the cases in which the strength of individual level association is different from the strength of trial level association. For this reason, it is recommended not to use simplified strategies when dealing with failure-time data, in contrast to the case of normally distributed data, for which simplified strategies are recommended. Possible reasons for this discrepancy might be that, in this case, ignoring the individual level association influences estimates of the mean structure parameters, what results in distorted estimates of the trial level association.     

凰蛔柿戏ā⒐δ芊ā⑶呦喙胤ê妥畹湍昶

njiang Institute of Ecology and Geography,CAS Urumqi,830011,Xinjiang,China;2 Agriculture Technologg Service Station of the Sixth Agriculture Division,XPCC Wujiagu 831300,Xinjiang,China;3 Arboretum of Urumqi City,Urumqi 830011,Xinjiang,China)The lake plays an important role in maintaining the ecological balance.A study on the lowest ecological water level of lake is significant in solving the ecological degeneration of lake in China.This paper analyzes six kinds of calculation methods of the lowest ecological water level of lake: the yea     

The efforts in the forearm during the use of anti-vibration gloves in simulated work tasks

The objective of this article is to analyze the levels of forearm muscular contraction associated with the use of anti-vibration gloves, in which the contraction levels with gloves and without gloves are compared. Two different vibrating tools - a Bosch Compact Duty Multi-Cutter and a Bosch Rotary Hammer carrying an Ø20 mm bit - were used in a simulated work environment. Standard operations were performed by each subject (n = 14) in an 80 × 40 mm pine bar (cross-sectional cuts with the Multi-Cutter) and on a concrete slab 2 × 2 m, 70 mm thick (20 mm holes with the Rotary Hammer). The forearm muscular efforts were measured by surface electromyography (EMG) in four different muscles: the flexor digitorum superficialis (FDS), flexor carpi ulnaris (FCU), extensor carpi radialis longus (ECRL) and extensor carpi ulnaris (ECU). For the flexor muscles (FDS and FCU), a decrease tendency (p > 0.05) in the measured EMG was observed when the operations are performed with gloves relative to the bare hand (a reduction of 5-23% in the percentage of maximum voluntary exertion (%MVE)). For the extensor muscles (ECU), a tendency toward increased (p > 0.05) muscular contraction was observed when the operations were performed with gloves (an increase of 3-20% in the %MVE). No such tendency was found in the ECRL muscle. The ECU was the muscle with the highest %MVE for 10 and 11 operators (n = 14), during the operations, respectively, with the Multi-Cutter and the Rotary Hammer. As a final conclusion from the study, anti-vibration gloves may increase forearm fatigue in the posterior forearm (ECU muscle) and decrease forearm fatigue in the FDS muscle during operations with the above-mentioned tools.

Relevance to industry

Anti-vibration gloves have been applied in industry to reduce the vibration transmitted into the hand and arms through the palms and fingers. This study analyzed forearm muscular efforts during simulated work tasks performed with two different vibrating tools, operated with the bare hand and with three different gloves, based on the analysis of EMG data.     

Design and analysis of the IFMIF–EVEDA beam dump cooling system

The IFMIF–EVEDA beam dump is designed to stop a 9 MeV, 125 mA continuous wave deuteron beam that deposits along its surface a total of 1.125 MW. The beam dump design is based on a 2.5 m long copper cone whose inner surface absorbs the beam. This piece is cooled by water flowing at high velocity through the annular channel formed between it and a second piece (shroud) made of four truncated cones of slightly different slopes.In this paper the beam dump cooling system will be briefly described, and the relevant 1D and 3D results will be presented paying especial attention to the computational fluid dynamics results.