Optimal weighed Holoentropy for video compression: an advanced HEVC

ABSTRACT

In recent times, the applications of multimedia are rising in a greedy mode and hence the amount of video transactions is also increasing exponentially. This has shouted great demands on effective models on video encoding and also for reducing the transmission channel congestion. This research work introduces a managing technique termed weighted encoding for High-Efficiency Video Coding (HEVC). HEVC, also termed as MPEG-H Part 2 and H.265 is a video compression standard that is widely utilized AVC (H.264 or MPEG-4 Part 10). When compared to AVC, HEVC grants double the ratio of data compression at a similar level of quality of the video or considerably enhanced video quality at a similar bit rate. This work intends to optimize the weight that adopted in HEVC for encoding. For this, this paper proposes a new Iterative based propagation update in the water wave Optimization Algorithm (IPU-WWO), which is the improved form of Water wave Optimization (WWO). The performance of proposed IPU-WWO is compared over other conventional methods like Artificial Bee Colony (ABC), Firefly (FF), Particle Swarm Optimization (PSO) and Genetic Algorithm (GA) with respect to Peak Signal to Noise Ratio (PSNR). By doing the encoding process, it minimizes the video size with perceptually better quality video or PSNR.     

Tribological behaviour of a 3Y-TZP/Ta ceramic-metal biocomposite against ultrahigh molecular weight polyethylene (UHMWPE)

This study aims to evaluate the tribological behaviour of 3Y-TZP/Ta (20 vol%) ceramic-metal composites and 3Y-TZP monolithic ceramic prepared by spark plasma sintering (SPS) against ultrahigh molecular weight polyethylene (UHMWPE). According to the results of pin (UHMWPE)-on-flat wear test under dry conditions, the UHMWPE – 3Y-TZP/Ta system exhibited lower volume loss and friction coefficient than the UHMWPE – monolithic ceramic combination due to the presence of an autolubricating layer that provides sufficient lubrication for reducing the friction. Owing to the lubrication of the liquid media, under wet conditions obtained using simulated body fluid (SBF), similar behaviour is observed in both cases. Additionally, the ceramic and biocomposite materials were subjected to a low temperature degradation (LTD) process (often referred to as “ageing”) to evaluate the changes in the tribological behaviour after this treatment. In this particular case, the wear properties of the UHMWPE-biocomposite system were found to be less influenced by ageing in contrast to the case of the UHMWPE-zirconia monolithic material. In addition to their exceptional mechanical performance, 3Y-TZP/Ta composites also showed high resistance to low temperature degradation and good tribological properties, making them promising candidates for biomedical applications, especially for orthopaedic implants.     

Group sequential crossover trial designs with strong control of the familywise error rate

Crossover designs are an extremely useful tool to investigators, and group sequential methods have proven highly proficient at improving the efficiency of parallel group trials. Yet, group sequential methods and crossover designs have rarely been paired together. One possible explanation for this could be the absence of a formal proof of how to strongly control the familywise error rate in the case when multiple comparisons will be made. Here, we provide this proof, valid for any number of initial experimental treatments and any number of stages, when results are analyzed using a linear mixed model. We then establish formulae for the expected sample size and expected number of observations of such a trial, given any choice of stopping boundaries. Finally, utilizing the four-treatment, four-period TOMADO trial as an example, we demonstrate that group sequential methods in this setting could have reduced the trials expected number of observations under the global null hypothesis by over 33%.     

Shaping the Toroidal Section of End Mills

The shaping of the toroidal cutting section of end mills is considered. Methods are devised for selecting the positional parameters in shaping the helical rake surface on the toroidal section. Relations are established between the geometric parameters of the end mill in the toroidal section.     

Bench- and pilot-scale sludge electrodewatering in a diaphragm filter press.

Electrodewatering is a technique in which pressure dewatering is combined with electrokinetic effects to realize an improved solid/liquid separation and hence increased filter cake dry matter contents. In order to be energy efficient, it is shown that sludge should be dewatered by pressure dewatering to a high extent prior to electric field application, and a sufficient contact time for the electric field must be guaranteed. In order to realize these goals, a bench- and pilot-scale diaphragm filter press suited for electrodewatering were constructed for treatment of sewage and other types of sludges. It was shown that electrodewatering of sludge is a feasible technique, especially for biological sludge types. Other types of sludge are less suited for electrodewatering because of the restricted improvements that can be realized in cake dry matter content and the high electric energy consumption. Furthermore, it was shown in pilot-scale tests that the use of a diaphragm filter press with electrodewatering facilities was very well suited to deliver dry filter cakes of sewage sludge at a moderate energy consumption. Depending on local market prices for investment, operating and sludge disposal costs, this technology may therefore lead to important savings in the sludge management process.     

Differentiation of Romashkino crude oils according to biomarker hydrocarbon parameters

The trends in composition of higher biomarker hydrocarbons (steranes and tri-, tetra-, and pentacyclic terpanes) in crude oils from diachronous producing complexes of deposits of the Romashkino oil field, which occurs in the central part of the South Tatarian arch, were studied. On the basis of variations in molecular biomarker parameters that reflect the type of source organic matter and the facies conditions of its accumulation and early diagenesis, the oils are classified with three groups.     

Optimizing the tapping regime on a blast furnace operating at variable speed

The main factors that determine the uniformity with which smelting products are tapped from a blast furnace are the rate of accumulation of the products in the hearth and the tapping rate. The first parameter is in turn determined by the stability of the furnace’s operation and can vary significantly even over the course of 24 h. The second parameter is determined mainly by the condition of the iron notch, the maintenance it receives, any changes that occur in the diameter of the channel of the notch, and the quality of the materials used to form the notch. Recommendations are presented to optimize tapping of the smelting products.