基于环三磷腈磷氮阻燃剂的合成及其在聚氨酯泡沫的应用

以六氯环三磷腈、对羟基苯甲醛、苯胺及亚磷酸二乙酯等原料,成功合成阻燃剂六（4-苯胺基次甲基苯氧基-亚磷酸二乙酯基）环三磷腈（HADPPCP）,用于阻燃基于苹果酸多元醇的聚氨酯硬泡。HADPPCP具有良好的热稳定性和成炭性,氮气气氛下的初始分解温度为191.9℃,700℃时的残炭量高到46.8%（质量）。HADPPCP的加入可以改善聚氨酯硬泡的热稳定性、阻燃性能和燃烧行为。添加25%(质量)的HADPPCP可以将聚氨酯泡沫的氧指数从18%提高到25%,最大热释放速率和总热释放量分别从230 kW/m²和20.1 MJ/m²降低至213 kW/m²和16.6 MJ/m²,总产烟量从10.5 m²下降到5.3 m²。     

三氟甲基磺酸铜催化果糖醇解制备乙酰丙酸甲酯

采用三氟甲基磺酸铜为催化剂催化果糖醇解制备乙酰丙酸甲酯,考察催化剂种类、催化剂用量、反应温度、反应压力和反应时间等对乙酰丙酸甲酯收率的影响。结果表明,在反应压力为2 MPa、果糖0.75 g、甲醇24 g、催化剂用量0.36 g和反应温度120 ℃条件下反应2.0 h,果糖完全被转化,乙酰丙酸甲酯收率达88.1%。     

Ionothermal synthesis of aggregated α-Fe₂O₃ nanoplates and their magnetic properties

Aggregated α-Fe(2)O(3) nanoplates have been successfully synthesized under ionothermal conditions through the self-assembly of nanoplatelets in a side-to-side manner. During the formation process of aggregated α-Fe(2)O(3) nanoplates, pure ionic liquid media is essential for the assembly and coalescence of small nanoplatelets into final nanoplates. Moreover, the magnetic properties of the aggregated α-Fe(2)O(3) nanoplates are strongly correlated to their unique structural characteristics.     

Daily concentrations of trace metals in aerosols in Beijing, China, determined by using inductively coupled plasma mass spectrometry equipped with laser ablation analysis, and source identification of aerosols

This paper describes the daily concentrations of trace metals and ionic constituents in the aerosol of Beijing, China from March 2001 to August 2003. Daily PM10 concentrations were also measured from September 2001 to August 2003. The daily average PM10 concentration at Beijing, China from September 2001 to August 2003 was 171+/-117 microg m(-3) (n = 673), which is 5-fold higher than at Yokohama, Japan. Trace metal concentrations were analyzed by using inductively coupled plasma mass spectrometry equipped with a laser ablation sample introduction (LA/ICP-MS), which is a rapid and simultaneous method for multi-element analysis. The daily average metal concentrations in TSP in Beijing from March 2001 to August 2003 were: Al: 3.5+/-2.4 (n = 727), Ti: 0.47+/-0.35 (n = 720), V: 0.013+/-0.010 (n = 716), Cr: 0.019+/-0.015 (n = 618), Mn: 0.24+/-0.16 (n = 730), Fe: 5.5+/-3.9 (n = 728), Co: 0.0046+/-0.0055 (n = 629), Ni: 0.022+/-0.024 (n = 680), Cu: 0.11+/-0.11 (n = 660), Zn: 0.77+/-0.60 (n = 726), As: 0.048+/-0.047 (n = 731), Se: 0.010+/-0.010 (n = 550), Cd: 0.0068+/-0.0082 (n = 709), Sb: 0.033+/-0.036 (n = 687), and Pb: 0.43+/-0.50 (n = 728) (unit, microg m(-3)). All the metal concentrations in TSP in Beijing, China were 1.7-21.8 times higher than those in TSP in the center of Tokyo, Japan. Notably, As concentrations in TSP in Beijing were 20-fold higher than those in Tokyo. Source identification of aerosols in Beijing was carried out by using the chemical mass balance (CMB) receptor model, with the daily concentration of metals in the aerosol. The major primary sources of the aerosol of Beijing were considered to be soil dust and coal combustion. Vehicle exhaust contribution tended to increase.     

Contributions of meteorology to the phenology of cyanobacterial blooms: implications for future climate change

Cyanobacterial blooms are often a result of eutrophication. Recently, however, their expansion has also been found to be associated with changes in climate. To elucidate the effects of climatic variables on the expansion of cyanobacterial blooms in Taihu, China, we analyzed the relationships between climatic variables and bloom events which were retrieved by satellite images. We then assessed the contribution of each climate variable to the phenology of blooms using multiple regression models. Our study demonstrates that retrieving ecological information from satellite images is meritorious for large-scale and long-term ecological research in freshwater ecosystems. Our results show that the phenological changes of blooms at an inter-annual scale are strongly linked to climate in Taihu during the past 23 yr. Cyanobacterial blooms occur earlier and last longer with the increase of temperature, sunshine hours, and global radiation and the decrease of wind speed. Furthermore, the duration increases when the daily averages of maximum, mean, and minimum temperature each exceed 20.3 °C, 16.7 °C, and 13.7 °C, respectively. Among these factors, sunshine hours and wind speed are the primary contributors to the onset of the blooms, explaining 84.6% of their variability over the past 23 yr. These factors are also good predictors of the variability in the duration of annual blooms and determined 58.9% of the variability in this parameter. Our results indicate that when nutrients are in sufficiently high quantities to sustain the formation of cyanobacterial blooms, climatic variables become crucial in predicting cyanobacterial bloom events. Climate changes should be considered when we evaluate how much the amount of nutrients should be reduced in Taihu for lake management.     

水热法制硫氧镁晶须最优工艺条件研究

以工业七水硫酸镁和烧碱为原料,采用低温水热法新工艺进行中试制硫氧镁晶须,将制得的产物用X射线衍射和红外光谱进行表征,并讨论了温度、浓度、搅拌强度和后处理等对产物的影响,获得了最优的工艺条件.结果表明该绿色循环工艺制备硫氧镁晶须,流程简单、获得的晶须性能好、物料利用率高、成本低,且对环境友好.     

Preparation of transparent BaSO4 nanodispersions by high-gravity reactive precipitation combined with surface modification for transparent X-ray shielding nanocomposite films

BaSO₄ nanoparticles as important functional materials have attracted considerable research interests, due to their X-rays barrier and absorption properties. However, most of BaSO₄ nanoparticles prepared by traditional technology are nanopowders with broad size distribution and poor dispersibility, which may greatly limit their applications. To the best of our knowledge, the synthesis of transparent BaSO₄ nanodispersions was rarely reported. Here, we firstly present a novel and efficient method to prepare transparent and stable BaSO₄ nanodispersions with a relatively small particle size around 10 to 17 nm using a precipitation method in a rotating packed bed (RPB), followed by a modification treatment using stearic acid. Compared with the BaSO₄ prepared in a traditional stirred tank, the product prepared using an RPB has much smaller particle size and narrower size distribution. More importantly, by using RPB, the reaction time can be significantly decreased from 20 min to 18 s. Furthermore, the transparent BaSO₄-polyvinyl butyral nanocomposite films with good X-ray shielding performance can be easily fabricated. We believe that the stable BaSO₄ nanodispersions may have a wide range of applications for transparent composite materials and coatings with X-ray shielding performance for future research.     

冬虫夏草及其多糖的研究与应用进展

本文概述了冬虫夏草的主要营养组分、虫草多糖的提取工艺、性能、药用功效及应用等方面的研究进展.     

Formation of hierarchical Si3N4 foams by protein-based gelcasting and chemical vapor infiltration

Silicon nitride foams with a hierarchical porous structure was formed by the combination of protein-based gelcasting,chemical vapor infiltration,and in-situ growth of silicon nitride nanowires.The porosity of the foams can be controlled at 76.3-83.8 vol%with an open porosity of 70.2—82.8 vol%.The pore size distribution was presented in three levels:<2μm(voids among grains and cross overlapping of silicon nitride nanowires(SNNWs)),10—50μm(cell windows),and>100μm(cells).The resulted compressive strength of the porous bodies at room temperature can achieve up to 18.0±1.0 MPa(porosity=76.3 vol%)while the corresponding retention rate at 800℃was 58.3%.Gas permeability value was measured to be 5.16(cm³·cm)/(cm²·s·kPa).The good strength,high permeability together with the pore structure in multiple scales enabled the foam materials for microparticle infiltration applications.     

Multi-Objective Optimization for an Industrial Grinding and Classification Process Based on PBM and RSM

The grinding and classification process is one of the key sub-processes in mineral processing, which influences the final process indexes significantly and determines energy and ball consumption of the whole plant. Therefore, optimal control of the process has been very important in practice. In order to stabilize the grinding index and improve grinding capacity in the process,a process model based on population balance model(PBM) is calibrated in this study. The correlation between the mill pow...