Lon-Ethernet网络适配器的设计与实现

介绍了Lonworks以太网适配器的设计方法，并给出了详细的设计步骤和软硬件实现方法．该适配器可完成TCP／IP协议与Lontalk协议之间的转换，能把Lon网智能设备接入以太网，实现控制网络与以太网的完全融合，应用前景广阔。     

镁基复合材料微区力学状态的有限元分析

弹性变形范围内,在采用三维有限元模型分析了颗粒增强Mg基复合材料(PRMMCs)中,颗粒的分布形态对材料微区力学状态的影响。结果表明,在保持颗粒长径比(2:1)和颗粒间距(d)不变的情况下,随着θ的变化,不存在颗粒断裂的危险,材料的主要失效方式为界面脱离和基体开裂。增强体相对夹角θ=15o时的结果优于其它情况,这更有利于充分发挥材料的性能。     

粉末冶金法制备SiC晶须增强MB15镁基复合材料

采用粉末冶金法制备了SiC晶须增强镁基复合材料(SiCW／MB15)试样。通过检测基体显微硬度探讨了SiCW对镁合金时效规律的影响，并借助扫描电镜(SEM)、透射电镜(TEM)和拉伸试验，研究了混粉方式对复合材料室温力学性能、SiCW分布及显微结构的影响。结果表明，MB15及其复合材料的时效硬化曲线上均存在双峰现象；SiCW的加入既提高了MB5的硬度，又加快了其时效速度：混粉方式对晶须分布及SiCW／MB15复合材料的室温力学性能影响很大。     

Bioleaching of refractory gold ore （ Ⅱ ）——Mechanism on bioleaching of arsenopyrite by Thiobacillus ferrooxidans

1　ＩＮＴＲＯＤＵＣＴＩＯＮＢｉｏｌｅａｃｈｉｎｇｐｒｏｃｅｓｓｅｓｈａｖｅｂｅｅｎｕｓｅｄｅｘｔｅｎｓｉｖｅｌｙｔｏｒｅｃｏｖｅｒｂａｓｅｍｅｔａｌｓ (ｍａｉｎｌｙｃｏｐｐｅｒ)ａｎｄｕｒａｎｉｕｍｆｒｏｍｌｏｗ ｇｒａｄｅｏｒｅｓａｎｄｍｏｒｅｒｅｃｅｎ     

Anodic dissolution of gold in alkaline solutions containing thiourea, thiosulfate and sulfite ions

Gld dissolves electrochemically in alkaline solutions containing ligands to form complex ions with gold ion.Therefore,selective leaching of noble metals is expected without dissolution of base metals such as steels,aluminum alloys in scrap treatment.Gold electrodes were investigated using linear sweep voltammetry,EQCM method and potentiostatic eclectrolysis in alkaline solutions containing thiourea,Na2SO3 and Na2S2O3.The solution composition,electrode potential affect gold dissolution rate and current efficiency.The gold dissolved from anode electrode forms complex ions,suspension particles as compound precipitates and deposits on cathode electrode as a metal.Anodic efficiency for gold dissolution is between 10% and 22%.This is caused by the oxidation decomposition of sulfite ions and thiourea.The statbility of the alkaline solution containing these elements was also estimated by capillary electrophoresis technique.     

Bioleaching of refractory gold ore （ Ⅲ ）——Fluid leaching Jinya refractory gold concentrate by Thiobacillus ferrooxidans

A novel fluidized-bed reactor was designed and installed for bloleaching in a semi-continuous way, by which a process for biuleaching-cyanidation of Jinya refractory gold arsenical concentrate was studied. The arsenic extraction rate reaches 82.5 % after 4-day batch biooxidation of the concentrate under the optimized condition of pH 2.0, ferric ion concentration 6.Sg/L and pulp concentration 10%. And leached rate of gold in the following cyanida.tion is over 90%. The parameters of three series fluidized-bed reactors exhibit stability during the semi-continuous bioleaching of the concentrate.Armmic in the concentrate can be got rid of 91% after 6-day leaching. Even after 4 days, 82% of arsenic extraction rate was still obtained. The recovery rates of gold are 92 % and 87.5 % respectively in cyaniding the above bioleached residues.The results will provide a base for further commercial production of gold development.     

圈数计在可逆可冷轧机上的应用

采用准确计圈方式可实现可逆式冷轧机的自动准确停车，介绍了此方法的硬件配置和基本控制原理，可作为同类型生产线的参考。     

增塑剂环己烷-1,2-二甲酸酯的绿色合成及性能研究

采用硫酸氢盐/金属单质复合催化剂,以环己烷-1,2-二甲酸酐(HHPA)和正丁醇为原料,合成了增塑剂环己烷-1,2-二甲酸二丁酯(DBCH).最佳工艺条件为:以NaHSO4·H2O/Fe为催化剂,醇酐物质的量比2.5:1,催化剂用量为醇酐总质量的3‰,催化剂粒径为150μm(100目),反应温度155～160℃,反应时间4 h,酯化率可达99.78％,纯度>99％.复合催化剂催化活性高,可回收,安全、经济且环境友好.考察了DBCH对聚氯乙烯制品脆化温度、力学性能、挥发性和耐迁移性能的影响,与纯的PVC树脂相比较,DBCH具有较好的增塑性能.     

2-甲基-5-(4-甲氧基苯磺酰胺)萘并[1,2-b]呋喃-3-羧酸乙酯的合成

乙酰乙酸乙酯与对甲苯胺、磷酸二氢钾反应得到3-(对甲苯氨基)-2-丁烯酸乙酯(化合物3);4-氨基-1-萘酚盐酸盐与甲氧基苯磺酰氯反应得到4-甲氧基-N-(4-羟基萘)苯磺酰胺(化合物6),之后经高碘酸钠氧化得到4-甲氧基-N-(4-氧代萘)苯磺酰胺(化合物7);中间体3和7发生环化得到目标物2-甲基-5-(4-甲氧基...     

结合MCP和RM的检测质量评估方法

在分析现有测量系统检测质量评价算法的基础上,针对各检测实验室测量系统对产品质量控制获取满意检测结果的预控能力不足,提出基于结合测量能力指数(MCP)和标准样品(RM)的过程质量特性分析与控制方法,采用MCP对小批量柔性检测质量进行评估。实例表明,该方法可以实现对各检测实验室在小批量检测条件下的产品质量控制,在各检测实验室测量系统检测结果趋同性方面优于传统的其它检测质量评价算法。