采用双相码高速传输水下声数据的一种方法

本文说明了利用单芯同轴电缆高速传输水下声数据的必要性,并给出了一种采用双相码的水下声数据基带传输方法,实验结果表明了该方案的优越性。     

激光熔覆用钴基合金粉末的研究

对激光熔覆用WFLC－11钴基合金粉末的激光熔覆工艺和熔覆层性能进行了研究，获得了WFLC－11钴基合金粉末激光熔覆层厚度与最小比能量关系曲线和熔覆层的组织、高温硬度等性能数据，为选择和使用WFLC－11钴基合金粉末提供了依据。     

“火”爆债务纠纷 铸成大祸坐牢

处理债务纠纷，本应清醒理智，通过正当的法律途径来解决，而犯罪嫌疑人朱某却走向极端。日前，涉嫌纵火的朱某已被许昌市魏都公安分局依法刑事拘留。     

基础或支座引起的强迫振动的图解法

基础与支座引起的振动是极为广泛的，如船舶甲板振动而引起船舶上层建筑振动，汽车驶过不平路面所产生的振动，地基振动而引起基础上建筑物的振动等都属于这一类振动现象。基础位移的简谐运动所引起的受迫振动，可用通常的求解常微分方程的待定系数法、复数求解法。本文试图用图解法求解，特点是简单扼要，力学意义明确。     

SERT结晶器液位控制系统

介绍一种梅山冶金公司板坯连同上应用的新型的结晶器液位控制系统，它由浮式式液位检测装置，ＲＳＥ１０００控制器和电动塞棒执行机构所组成，由法国ＳＥＲＴ公司成套制造。     

Mensuration and simulation of mold filling process in semi-solid die-cast of aluminum alloy

To understand the flow trace of semi-solid slurry in mold cavity, some thermocouples were inserted in mold cavity, and the reaction timing of thermocouples showed the arrival of fluid. The filling time and rate were estimated by comparison between the experiment and calculation. The introduction of computer simulation technique based on ADSTEFAN was to predict injectionforming process and to prevent defects during trial manufacture of various parts. By comparing the formed appearance of parts in experiment and in simulation, and observing the relationship between internal defects inspected by X-ray or microscope and the flow field obtained in simulation, it was indicated that both have quite good agreement in simulation and experiment. Right predictions for cast defects resulted from mold filling can be carried out and proper direction was also proposed. The realization of numerical visualization for filling process during semi-solid die-cast process will play an important role in optimizing technology plan.     

黄铜中纳米级微裂纹的形核与钝化

黄铜薄膜试样在透射电镜中原位拉伸观察表明，在平衡条件下加载裂发出的位错纯化成无位错区，它是一个应变很高的异常弹性区。当缺口足够锐，外加载荷足够大时，这个非线弹性区中的应力有可能达到原子键合力，从而使纳米级微裂纹在无位错区中不连续形核，或从钝化的原裂纹顶端形核。这个微裂纹一昊形核，即使保持恒位移，也将钝化成空洞或缺口。     

纤维素型全位置立向下焊高效焊条的研制

根据全位置上向下焊接的特点和要求,通过大量的试验,确定了具有短渣特性的高氧化钛渣系及高发气量的微晶纤维作为焊条的基本配方,并加入铁砂提高焊条的熔敷效率.试验结果表明,研制的E8010焊条其工艺性能接近国外同类焊条,力学性能已超过国外同类焊条.