Four-channel polarization-insensitive optically transparent wavelength converter

Multichannel wavelength converters may be important components in the cross-connects in future wavelength-division multiplexed (WDM) transport networks. We demonstrate a multichannel, polarization-insensitive, optically transparent wavelength converter, based on four-wave mixing in two semiconductor optical amplifiers in a polarization-diversity arrangement. Bit-error-rate (BER) measurements with four input 2.5-Gb/s WDM channels, spaced by 2 nm, show penalties for wavelength conversion less than 2.6 dB at 10/sup -9/ BER. Changes in the state of polarization of the input signals cause the output power to change by less than 1.2 dB, and the corresponding power penalties change by less than 0.9 dB.     

Wavelet packet modulation for orthogonally multiplexedcommunication

Utilizing multidimensional signaling techniques, a generalized multirate wavelet-based modulation format for orthogonally multiplexed communication systems is presented. Wavelet packet modulation (WPM) employs the basis functions from an arbitrary pruning of a dyadic tree structured filter bank as orthogonal pulse shapes for conventional quadrature amplitude modulation (QAM) symbols. This generalized framework affords an entire library of basis sets with increased flexibility in time-frequency (T-F) partitioning. The bandwidth efficiency and power spectral density figures of merit for the general signal are derived and shown to be that of standard QAM     

Thick-layer glycerin-containing bichromated gelatin for recording volume holograms

A thick-layer light-sensitive material consisting of glycerin-containing bichromated gelatin has been prepared and used to record real-time volume holograms with 0.44 μm helium-cadmium laser radiation. The thickness of the layers is 400–600 μm. The holographic sensitivity of the material is 1 J/cm². The highest diffraction efficiency of holograms recorded using a symmetric system with parallel beams is 32%. Pis’ma Zh. Tekh. Fiz. 23, 62–65 (April 12, 1997)     

Propagation characteristics of a heaviside absorbing layer for TLM

The perfectly matched layer for use with the finite-difference time-domain method is adapted to our transmission-line matrix simulation as what we call a heaviside absorbing layer (HAL). It is shown that the reflection coefficient for the wave incident on a HAL is less than that of the wave incident on a matched-load termination at all angles of incidence. Furthermore, the dispersion relation of a transmission-line matrix mesh of a symmetrical condensed node with both electric and magnetic loss stubs is derived. It provides guidance on how to choose the losses of HAL and other simulation parameters properly     

Analysis of switched diversity TCM-MPSK systems on Nakagami fadingchannels

Space diversity reception and forward-error correction coding are powerful techniques to combat multipath fading encountered in mobile radio communications. In this paper, we analyze the performance of a discrete-time switched diversity system using trellis-coded modulation multiple phase-shift keying (TCM-MPSK) on slow, nonselective correlated Nakagami (1960) fading channels. Analytical upper bounds using the transfer function bounding technique are obtained and illustrated by several numerical examples. A simple integral expression for calculating the exact pairwise error probability is presented. The use of optimum adaptive and fixed switching thresholds is considered. Monte Carlo simulation results, which are more indicative of the exact system performance, are also given     

Use of a two-wire microwave line at the boundary of the investigated zone to measure the electron density in a low-temperature plasma

A new method based on a two-wire line has been developed for noncontact diagnostics of a low-temperature plasma and its fluxes in channels with complex profiles. This method provides good spatial and time resolution. Pis’ma Zh. Tekh. Fiz. 23, 1–7 (July 26, 1997)     

Construction of a plasmid carrying both CTP synthetase and a fused gene formed from cholinephosphate cytidylyltransferase and choline kinase genes and its application to industrial CDP-choline production: enzymatic production of CDP-choline from orotic acid (Part II)

A new method for enzymatic production of cytidine diphosphate choline (CDP-choline) from orotic acid and choline chloride was developed. To establish an industrial manufacturing process, we constructed a plasmid, pCKG55, which simultaneously expressed in Escherichia coli the three following enzymes; CTP synthetase (encoded by the pyrG gene from E. coli), cholinephosphate cytidylyltransferase (encoded by the CCT gene from Saccharomyces cerevisiae), and choline kinase (encoded by the CKI gene from S. cerevisiae). CCT and CKI genes on pCKG55 were designed to be expressed as a single CCT/CKI fused protein. This CCT/CKI fused protein retained both activities and the thermal stability of its cholinephosphate cytidylyltransferase activity was nearly the same as the native CCT enzyme. Corynebacterium ammoniagenes KY13505 and E. coli MM294/pCKG55 were cultured in 5-liter jar fermentor independently. Equal volumes of each broth were mixed in a 2-liter jar fermentor, and then the enzymatic reaction was done using 47 mM orotic acid and 60 mM choline chloride as substrates. After 23 h of the reaction at 32 degrees C, 21.5 mM (11 g/liter) of CDP-choline was accumulated.     

Estimating local mean signal strength of indoor multipathpropagation

We explore techniques for the measurement of local mean signal strength at 900 MHz and 2 GHz. In particular, we characterize the impact of transmitter and receiver antenna rotation on the estimated local mean. Then, we explore the collection of high resolution data while moving along a linear trajectory and using linear averaging techniques to estimate the local mean. With this information, the best measurement techniques can be chosen depending on the required speed versus accuracy tradeoff. Finally, we use a ray tracing propagation model to evaluate different methods of calculating the local mean signal strength for indoor environments     

Nodal sensitivities as error estimates in computational mechanics

Summary This paper proposes the use of special sensitivities, called nodal sensitivities, as error indicators and estimators for numerical analysis in mechanics. Nodal sensitivities are defined as rates of change of response quantities with respect to nodal positions. Direct analytical differentiation is used to obtain the sensitivities, and the infinitesimal perturbations of the nodes are forced to lie along the elements. The idea proposed here can be used in conjunction with general purpose computational methods such as the Finite Element Method (FEM), the Boundary Element Method (BEM) or the Finite Difference Method (FDM); however, the BEM is the method of choice in this paper. The performance of the error indicators is evaluated through two numerical examples in linear elasticity.