Demonstrating the effect of vertical and directional shear for resource mapping of wind power

The use of wind energy is growing around the world, and its growth is set to continue into the foreseeable future. Estimates of the wind speed and power are helpful to assess the potential of new sites for development and to facilitate electric grid integration studies. In the present paper, wind speed and power resource mapping analyses are performed. These resource mappings are produced on a 13 km, hourly model grid over the entire continental USA for the years of 2006–2014. The effects of the rotor equivalent wind speed (REWS) along with directional shear are investigated. The total dataset (wind speed and power) contains ≈152,000 model grid points, with each location containing ≈78,000 hourly time steps. The resource mapping and dataset are created from analysis fields, which are output from an advanced weather assimilation model. Two different methods were used to estimate the wind speed over the rotor swept area (with rotor diameter of 100 m). First, using a single wind speed at hub height (80 m) and, second, the REWS with directional shear. The demonstration study shows that in most locations the incorporation of the REWS reduces the average available wind power. In addition, the REWS technique estimates more wind power production at night and less production in the day compared with the hub height technique; potentially critical for siting new wind turbines and plants. However, the wind power estimate differences are dependent on seasonality, diurnal cycle and geographic location. More research is warranted into these effects to determine the level at which these features are observed at actual wind plants.© 2015 The Authors. Wind Energy published by John Wiley & Sons, Ltd.     

An analytical solution to the extended Navier–Stokes equations using the Lambert W function

Microchannel gas flows are of importance in a wide range of microelectro mechanical devices. In these flows, the mean free path of the gas can be comparable to the characteristic length of the microchannel, leading to strong diffusion‐enhanced transport of momentum. Numerical solutions to the extended Navier–Stokes equations (ENSE) have successfully modeled such microchannel flows. Analytical solutions to the ENSE for the pressure and velocity fields using the Lambert W function are derived. We find that diffusive contributions to the total transport are only dominant for low average pressures and low pressure drops across the microchannel. For large inlet pressures, we show that the expressions involving the Lambert W function predict steep gradients in the pressure and velocity localized near the channel exit. We extract a characteristic length for this boundary layer. Our analytical results are validated by numerical and experimental results available in the literature. © 2014 American Institute of Chemical Engineers AIChE J, 60: 1413–1423, 2014     

Accelerated Cheddar Cheese Ripening by Added Microbial Enzymes

Good quality medium sharp Cheddar cheeses with 3-mo curing at 10 C were produced when the following enzyme combinations and concentrations were used: fungal protease 31000 (Miles), .005% + fungal lipase-MY (Meito) .00005 to .0002%; and fungal protease P-53 (Rohm & Haas), .0035% + fungal lipase-MY (Meito), .00005 to .0002%.Cheddar cheeses treated with microbial enzymes developed higher soluble protein and free volatile fatty acids and displayed better flavor and greater acceptability than control cheeses. Added microbial proteases contributed to the breakdown of casein, especially β-casein. Also, αs₁-I casein and free amino acids were high in cheeses treated with protease. Increased rate of proteolysis in enzyme-treated cheese had a direct relation to accelerated ripening.     

Data fusion with flexible message composition in Driver-in-the-Loop vehicular CPS

This work addresses a unique data fusion problem in Vehicular Cyber-Physical Systems (VCPS) arising from Human Factors (HF) considerations. Typically, a VCPS message intended for human drivers is composed of many data elements (DEs), and different messages can be fused by the sender before transmission e.g., by eliminating identical (or redundant) DEs in order to save transmission bandwidth in the wireless network. Still, not all distinct DEs can be received properly due to the limited transmission resources available to the sender and/or transmission errors. Subsequently, some of the messages intended for a driver cannot be delivered. On the other hand, a partially delivered message may still be beneficial (in terms of generating some utility) to a driver. More specifically, when considering HF, the DEs can be grouped into two distinct parts: essential and auxiliary. While a partially reconstructed message missing even a single essential DE fails to produce any benefit (or utility) for a driver, each auxiliary DE can independently produce an additional utility so long as all the essential DEs of the message are also available.In this paper, we deal with a new Driver-in-the-Loop Data Fusion Problem (DDFP) with the primary issue being: given a list of out-going messages and a limit on the number of DEs that can be transmitted, how does the sender choose which DEs (each carrying a different utility) to transmit, in order to maximize the system-wide utility at the receiver. We formulate DDFP mathematically, and prove it to be NP-Complete. We study DDFP in both ideal and lossy communication networks, and propose several efficient algorithms for them. Besides the Single-Sender-Single-Receiver model, we also look into DDFP in Multiple-Sender-Single-Receiver and Single-Sender-Multiple-Receiver models with several practical considerations. Numerical results from large scale simulations are also presented.     

Superconducting State Parameters of (Ni33Zr67)1?xMx (M = Ti, V, Co, Cu) Ternary Amorphous Superconductors

The theoretical investigations of the superconducting state parameters (SSP) viz. electron-phonon coupling strength λ, Coulomb pseudopotential μ ^∗, transition temperature T _C , isotope effect exponent α and effective interaction strength N _O V of (Ni₃₃Zr₆₇)_1−x M _x (M=Ti,V,Co,Cu) ternary amorphous superconductors have been reported using Ashcroft’s empty core (EMC) model potential. Five different types of local field correction functions proposed by Hartree (H), Taylor (T), Ichimaru-Utsumi (IU), Farid et al. (F) and Sarkar et al. (S) are used in the present investigation to study the screening influence on the aforesaid properties. The T _C obtained from Sarkar et al. (S) local field correction function are found in excellent agreement with available theoretical data. Quadratic T _C equation has been proposed, which provides successfully the T _C values of ternary amorphous alloys under consideration. Also, the present results are found to be in qualitative agreement with other such earlier reported data, which confirms the superconducting phase in the superconductors.     

Biaxial tensile behavior of spunbonded nonwoven geotextiles

Geotextiles can be successfully employed for any geotechnical application when they are able to sustain pre-defined levels of tensile stresses. The biaxial tensile test has an advantage over other tensile test methods in that it does not allow “necking” during deformation which simulates the operational conditions of geotextiles under confined stresses. In this study, the model for uniaxial tensile behavior of nonwovens has been modified to investigate the biaxial tensile behavior of spunbonded geotextiles. The model has included the effect of fiber re-orientation, stress-strain behavior of constituent fibers, and physical characteristics of nonwovens when the geotextile specimen is laterally constrained. A comparison is made between predicted and experimental stress-strain curves obtained from previous work (Bais-Singh and Goswami, 1998). Theoretical findings of biaxial tensile behavior obtained using the layer theory are also critically discussed. In addition, it has been revealed that fiber re-orientation is a key factor in translating the random spunbonded nonwoven geotextiles to anisotropic structures under defined biaxial tensile stresses.     

A Raman study of CdSe and ZnSe nanostructures

Raman studies have been carried out on CdSe nanotubes and ZnSe nanorods produced by surfactant-assisted synthesis. The Raman spectrum of CdSe nanotubes shows modes at 207.5 and 198 cm-1; the former arises from the longitudinal optic phonon mode red-shifted with respect to the bulk mode because of phonon confinement, and the latter is the l = 1 surface phonon. Analysis based on the phonon confinement model demonstrates that the size of the nanoparticle responsible for the red-shift is about 4 nm, close to the estimate from the blue-shift of the photoluminescence. The Raman spectrum of ZnSe nanorods shows modes at 257 and 213 cm-1, assigned to longitudinal and transverse optic phonons, blue-shifted with respect to the bulk ZnSe modes because of compressive strain. The mode at 237 cm-1 is the surface phonon.     

Familial Mediterranean fever at the millennium. Clinical spectrum, ancient mutations, and a survey of 100 American referrals to the National Institutes of Health

Regarded as the most common and best understood of the hereditary periodic fever syndromes, familial Mediterranean fever (FMF) is a recessively inherited disease of episodic fever with some combination of severe abdominal pain, pleurisy, arthritis, and a characteristic ankle rash. The flares typically last for up to 3 days at a time, and most patients are completely asymptomatic between attacks; if untreated with prophylactic colchicine, some patients later develop amyloidosis and renal failure. The recent cloning of the FMF gene on the short arm of chromosome 16p, and the subsequent finding that its tissue expression is limited to granulocytes, has helped to explain the dramatic accumulation of neutrophils at the symptomatic serosal sites; the wild-type gene likely acts as an upregulator of an anti-inflammatory molecule or as a downregulator of a pro-inflammatory molecule. For nearly half a century, FMF was thought to cluster primarily in non-Ashkenazi Jews, Arabs, Armenians, and Turks, although the screening of the 8 known mutations in an American cohort has identified substantial numbers of people from the Ashkenazi Jewish and Italian populations in the United States who also have this disease. Nevertheless, the symptoms often go unrecognized and patients remain undiagnosed for years, not receiving the highly efficacious colchicine therapy; their histories often include multiple laparotomies, laparoscopies, and psychiatric evaluations. The combinations of clinical manifestations among FMF patients are quite heterogeneous, but our American cohort did not establish any connections between individual mutations and specific clinical pictures--as is seen in other diseases like cystic fibrosis, in which distinct genotypes target certain organ systems. Specifically, the data from our American series are insufficient to evaluate the hypothesis that the M694V/M694V genotype confers a more severe phenotype, or increases the risk of amyloidosis; but both our data and the recent literature (160) indicate that amyloidosis can occur in FMF patients with only 1 copy, or no copies, of the M694V mutation. It appears that specific MEFV mutations are probably not the sole determinants of phenotype, and that unknown environmental factors or modifying genes act as accomplices in this disease. Although we hope the discovery of the FMF gene will allow the diagnosis of FMF to become genetically accurate, the reality is that both clinical and genetic tools must still be used together unless mutations are identified on both of a patient's chromosomes. Physicians should be careful not to rule out the diagnosis in patients of high-risk ethnic backgrounds just because of atypical clinical features, as our data indicate that MEFV mutations are sometimes demonstrable in such patients. At the same time, physicians cannot yet rely solely on a genetic diagnosis because we have not yet identified a sufficient spectrum of mutations, and it is not currently feasible to examine every patient's full DNA sequence for the entire gene; screening an ethnically consistent and clinically positive patient for the 8 known mutations frequently identifies a mutation on only 1 chromosome, and genetic analysis of other classic cases will often reveal none of the 8 mutations. Still, our data suggest that ethnic background is an important predictor of finding 1 of the presently known mutations, and the knowledge of ancestries atypical for FMF can suggest the diagnosis of other hereditary periodic fever syndromes. As the list of FMF-associated MEFV mutations is expanded, and/or new sequencing technologies permit more rapid screening, the value and interpretation of genetic testing for FMF will become more straightforward. Moreover, as the pathophysiology of this disorder becomes less of a hypothesis and more of an understood entity, it is likely that treatment options will broaden beyond the use of daily prophylactic colchicine. (ABSTRACT TRUNCATED)     

Effect of ash on maximum thickness of plastic layer of coals

A study of the effect of ash yield on the maximum thickness of the plastic layer (MTPL) of some coking coals (as measured by the Sapozhnikov plastometer) has revealed that with an increase in the former the latter in general decre?es. A rectilinear relation approximately exists between the ash percentage (dry basis) and log MTPL values of coals. For the samples studied, a multiple correlation incorporating the rank factor was found to be unnecessary. Higher Fe₂O₃ and SO₃ contents from the coal were found to be associated with higher MTPL values.