Identification and classification of ERP critical failure factors in Iranian industries

Implementation of Enterprise Resource Planning systems (ERPs) is a complex and costly process, which usually results in serious failures. The majority of previous studies and research projects have been conducted in identifying ERP Critical Success Factors (CSFs) rather than Critical Failure Factors (CFFs). On the other hand, most studies have been devoted to developed countries, while in developing countries, many companies have moved towards using such systems. The majority of IT/IS management standards and guidelines have been developed by technologically-leading countries. But developing countries, which mostly confront with especial challenges, have a different condition from the implicit assumptions of leading countries. Iran is one of these countries that many of its ERP implementation projects led to failure. There is no comprehensive study that identifies ERP CFFs in Iranian industries. The main purpose of this study is to identify such factors and classify them to help other industries, consultants and implementers to prevent failures in the implementation of ERP projects. So, at first, with the semi structured interviews and literature reviews, 47 failure factors were identified. After that a questionnaire developed and sent to ERP project team members in Iranian industries that failed in their ERP projects. Robust Exploratory Factor Analysis (EFA) has been used for data analysis, which finally classified critical failure factors in seven groups named as vendor and consultant, human resources, managerial, project management, processes, organizational and technical. The results of this study have provided a very useful reference for scholars and managers to identify the relevant issues of ERP projects failure in developing countries.     

Heat transfer in a turbulent jet impinging on a moving plate considering high plate-to-jet velocity ratios

In this paper, heat transfer characteristics of a turbulent slot jet impinging orthogonally on an isothermal moving hot plate is studied numerically. The governing equations were discretized using the finite volume method and the υ ² — f turbulence model was employed for turbulence modeling. The effect of the jet Reynolds number and the plate-to-jet velocity ratio (R) on the Nusselt were investigated. Despite of most previous studies, which have been restricted to R≤2, in the present research higher values of R, also were considered (0≤R≤6). Range of studied jet Reynolds number was between 3000 and 60000. The results indicate that at a fixed plate-to-jet velocity ratio increment of the Reynolds number leads to the enhancement of the average Nusselt number. For each Reynolds number, the average Nusselt number reduces with increasing the plate-to-jet velocity ratio until it becomes minimum at R = 1.25. For R>1.25 trend changes so that these parameters increase. In addition, it was found that only for R>2.5 the average Nusselt number is improved due to the plate motion in comparison with the stationary jet. The results are validated against available experimental data, showing good agreement.     

An integrated model for closed-loop supply chain configuration and supplier selection: Multi-objective approach

Reverse logistics consists of all operations related to the reuse of products. External suppliers are one of the important members of reverse logistics and closed loop supply chain (CLSC) networks. However in CLSC network configuration models, suppliers are assessed based on purchasing cost and other factors such as on-time delivery are ignored. In this research, a general closed loop supply chain network is examined that includes manufacturer, disassembly, refurbishing, and disposal sites. Meanwhile, it is managed by the manufacturer. We propose an integrated model which has two phases. In the first phase, a framework for supplier selection criteria in RL is proposed. Besides, a fuzzy method is designed to evaluate suppliers based on qualitative criteria. The output of this stage is the weight of each supplier according to each part. In the second phase, we propose a multi objective mixed-integer linear programming model to determine which suppliers and refurbishing sites should be selected (strategic decisions), and find out the optimal number of parts and products in CLSC network (tactical decisions). The objective functions maximize profit and weights of suppliers, and one of them minimizes defect rates. To our knowledge, this model is the first effort to consider supplier selection, order allocation, and CLSC network configuration, simultaneously. The mathematical programming model is validated through numerical analysis.     

Fault diagnosis and accommodation of nonlinear systems based on multiple-model adaptive unscented Kalman filter and switched MPC and H-infinity loop-shaping controller

In this paper, a new active fault tolerant control (AFTC) methodology is proposed based on a state estimation scheme for fault detection and identification (FDI) to deal with the potential problems due to possible fault scenarios. A bank of adaptive unscented Kalman filters (AUKFs) is used as a core of FDI module. The AUKF approach alleviates the inflexibility of the conventional UKF due to constant covariance set up, leading to probable divergence. A fuzzy-based decision making (FDM) algorithm is introduced to diagnose sensor and/or actuator faults. The proposed FDI approach is utilized to recursively correct the measurement vector and the model used for both state estimation and output prediction in a model predictive control (MPC) formulation. Robustness of the proposed FTC system, H_∞ optimal robust controller and MPC are combined via a fuzzy switch that is used for switching between MPC and robust controller such that FTC system is able to maintain the offset free behavior in the face of abrupt changes in model parameters and unmeasured disturbances. This methodology is applied on benchmark three-tank system; the proposed FTC approach facilitates recovery of the closed loop performance after the faults have been isolated leading to an offset free behavior in the presence of sensor/actuator faults that can be either abrupt or drift change in biases. Analysis of the simulation results reveals that the proposed approach provides an effective method for treating faults (biases/drifts in sensors/actuators, changes in model parameters and unmeasured disturbances) under the unified framework of robust fault tolerant control.     

New approaches for determining a common set of weights for a voting system

Data Envelopment Analysis (DEA) is one of the methods that have been proposed to determine the weights in a ranked voting system. DEA solves one model corresponding to each candidate and evaluates candidates with their own weights. However, sometimes solving only one model, and evaluating the candidates based on a common set of weights, is preferred. In this paper, some drawbacks of existing models are explained and new approaches for determining a common set of weights are proposed. Numerical examples are utilized to illustrate the content of the paper.     

Metal-electroceramic bonding in PZT through the selective application of laser energy

Ferrite powder has been directly bonded to the surface of poled lead zirconate titanate (PZT-4) using direct laser sintering. The resultant cohesion between the metal and ceramic is extremely good although care must be taken with the processing in order to limit the damage inflicted upon the PZT. Four point bending suggests that the strength of the processed samples has reduced to 60 MPa as compared to 76 MPa for the unprocessed ceramic. Electrical and piezoelectric measurements shows that the laser sintering had caused mechanical damage to a depth of 550 μm and thermal damage (depoling) to a depth of 800 μm.     

Circ_0011129 Encapsulated by the Small Extracellular Vesicles Derived from Human Stem Cells Ameliorate Skin Photoaging

Photoaging is not only the main cause of skin aging caused by exogenous factors, it is also related to a variety of skin diseases and even malignant tumors. Excessive and repeated exposure to ultraviolet radiation, especially UVA induces oxidative stress, DNA damage, inflammation, and collagen and elastin degeneration, ultimately leads to skin photoaging, manifested by skin redness, coarse wrinkles, and pigmentation even skin cancer. There has been a large demand of effective prevention and medications but approaches in the current management of photoaging are very limited. In the previous study, we found that a non-coding circular RNA circ_0011129 acts as a miR-6732-5p adsorption sponge to inhibit the reduction of type I collagen and the denaturation and accumulation of elastin in UVA-induced HDF cells photoaging model. However, in vivo instability and efficient delivery to the target cell of circRNA is a major challenge for its clinical application. Therefore, improving its stability and delivery efficiency are desired. In this study, we proposed a strategy of delivering circ_0011129 with small extracellular vesicles (sEVs) from human adipose-derived stem cells (hADSCs) to intervene in the photoaging process. The results showed that sEVs from hADSCs in 3D bioreactor culture (3D-sEVs) can prevent photoaging. Consequently, by overexpressing circ_0011129 in hADSCs, we successfully loaded it into 3D-sEVs (3D-circ-sEVs) and its protective effect was better. Our studies provide a novel approach to preventing skin photoaging, which has important clinical significance and application value for the development of non-coding RNA drugs to treat skin photoaging. We first screened out hADSCs-derived sEVs with excellent anti-oxidant effects. We then compared the sEVs collected from traditional 2D culture with 3D bioreactor culture. By miRNA-seq and GEO data analysis, we found that miRNAs in 3D-sEVs were enriched in cell activities related to apoptosis, cellular senescence, and inflammation. Subsequently, we prepared circ_0011129-loaded 3D-sEVs (3D-circ-sEVs) by overexpressing it in hADSCs for the treatment of photoaging in vitro. We proved that 3D-circ-sEVs can interfere with the process of cell photoaging and protect cells from UVA radiation damage, as well as in a H2O2-induced oxidative stress model.     

从欧美日标准看我国不锈钢钢管制造业的现状及发展前景(上)

介绍了欧、美、日不锈钢钢管标准的特点。详细对比欧、美、日不锈钢钢管新标准中钢种类别、制造方法、供货状态、规格范围等有关内容。指出我国不锈钢钢管制造业应在不断扩大产量的同时,加大新钢种研发力度,完善产品规格范围,开发不锈钢钢管制造新工艺,注重产品外观质量,增加我国不锈钢钢管行业的国际竞争力。     

Lie group method for solving viscous barotropic vorticity equation in ocean climate models

In studying the problem of the nonlinear viscous barotropic non-divergent vorticity equation on $f$- and $\beta$- planes, the method of Lie group has been applied. The method reduces the number of independent variables by one, and consequently, for the case of three independent variables we applied the method successively twice and the nonlinear partial differential equation reduces to ordinary differential equation. Investigation of exact solutions of the viscous barotropic non-divergent vorticity equation on $f$- and $\beta$- planes, via the application of Lie group, provides large classes of new exact solutions which include both Rossby and Rossby–Haurwitz waves as special cases. Also, The Lie symmetries of the viscous barotropic non-divergent vorticity equation with two parameters $F$ and $\beta$, are determined. The possible reductions of the viscous barotropic vorticity equation with two parameters $F$ and $\beta$ have been investigated by means of one- dimensional Lie subalgebras.