Retrofitting of reinforced concrete beams using composite laminates

This paper presents the results of an experimental study to investigate the behaviour of structurally damaged full-scale reinforced concrete beams retrofitted with CFRP laminates in shear or in flexure. The main variables considered were the internal reinforcement ratio, position of retrofitting and the length of CFRP. The experimental results, generally, indicate that beams retrofitted in shear and flexure by using CFRP laminates are structurally efficient and are restored to stiffness and strength values nearly equal to or greater than those of the control beams. It was found that the efficiency of the strengthening technique by CFRP in flexure varied depending on the length. The main failure mode in the experimental work was plate debonding in retrofitted beams.     

Numerical simulation of the effect of grain size on corrosion processes: Surface roughness oscillation and cluster detachment

This work reports on the numerical simulation results of the grain size effect on the corrosion processes using a cellular automata model. The material considered consists of domains and their edges. The domains represent the monocrystalline cores while their edges represent the intergranular defects. Either a periodic pattern or randomly generated domains of Voronoï tessellation are used. The model parameters, taking into account the polycrystalline aspect of corrosion, are the domain density and the corrosion probabilities of metal grain core and grain boundary sites. The corrosion probability for grain edge is taken as higher than for the grain core. A complicated surface structure appears with a high geometrical roughness if the density of defects is not too high. A strong correlation between the roughness evolution, the metal crystalline properties and the corrosion mechanism of the metal dissolution was established.     

Tryptophan: From Diet to Cardiovascular Diseases

Cardiovascular disease (CVD) is one of the major causes of mortality worldwide. Inflammation is the underlying common mechanism involved in CVD. It has been recently related to amino acid metabolism, which acts as a critical regulator of innate and adaptive immune responses. Among different metabolites that have emerged as important regulators of immune and inflammatory responses, tryptophan (Trp) metabolites have been shown to play a pivotal role in CVD. Here, we provide an overview of the fundamental aspects of Trp metabolism and the interplay between the dysregulation of the main actors involved in Trp metabolism such as indoleamine 2, 3-dioxygenase 1 (IDO) and CVD, including atherosclerosis and myocardial infarction. IDO has a prominent and complex role. Its activity, impacting on several biological pathways, complicates our understanding of its function, particularly in CVD, where it is still under debate. The discrepancy of the observed IDO effects could be potentially explained by its specific cell and tissue contribution, encouraging further investigations regarding the role of this enzyme. Thus, improving our understanding of the function of Trp as well as its derived metabolites will help to move one step closer towards tailored therapies aiming to treat CVD.     

Palyno‐morphological characteristics of gymnosperm flora of pakistan and its taxonomic implications with LM and SEM methods

The present study is intended to assess gymnosperms pollen flora of Pakistan using Light Microscope (LM) and Scanning Electron Microscopy (SEM) for its taxonomic significance in identification of gymnosperms. Pollens of 35 gymnosperm species (12 genera and five families) were collected from its various distributional sites of gymnosperms in Pakistan. LM and SEM were used to investigate different palyno‐morphological characteristics. Five pollen types (i.e., Inaperturate, Monolete, Monoporate, Vesiculate‐bisaccate and Polyplicate) were observed. Six In equatorial view seven types of pollens were observed, in which ten species were sub‐angular, nine species were Traingular, six species were Perprolate, three species were Rhomboidal, three species were semi‐angular, two species were rectangular and two species were prolate. While five types of pollen were observed in polar view, in which ten species were Spheroidal, nine species were Angular, eight were Interlobate, six species were Circular, two species were Elliptic. Eighteen species has rugulate and 17 species has faveolate ornamentation. Eighteen species has verrucate and 17 have gemmate type sculpturing. The data was analysed through cluster analysis. The study showed that these palyno‐morphological features have significance value in classification and identification of gymnosperms. Based on these different palyno‐morphological features, a taxonomic key was proposed for the accurate and fast identifications of gymnosperms from Pakistan.     

Passive mixing control for innovative air diffusion terminal devices for buildings

This paper presents an innovative concept for optimized air diffusion in buildings. The method uses passive control of air jet through lobed diffusers. An analysis is done experimentally at different scales for a lobed shaped geometry. A cross-shaped jet is characterized first through an isolated orifice and then at the scale of one perforated panel. An intermediary analysis of two coalescent and a row of cross-shaped jets is also proposed. All the results lead to the same conclusion. The lobed diffuser favors the self-induction compared to a reference conventional circular perforated diffuser. The air flow induced in the case of the lobed perforated panel is in average twice as the one of the circular perforated panel. Despite the consequent gain in air induction for the lobed perforated panel flow, the streamwise maximum velocities display comparable values in the far field which signifies comparable throws for the two flows. Consequently, the presented lobed perforated panel concept can be generalized to different type of diffusers to improve mixing ventilation in buildings.     

A comparison of three turbulence models for the prediction of parallel lobed jets in perforated panel optimization

The general context of the present study is the design of high induction HVAC air diffusers by means of passive jet control. When the diffuser is a perforated panel with lobed orifices (Meslem et al. 2010), the optimization of jet induction consists in improving the orifice’s geometry, the spacing between orifices and their arrangement on the panel. In this study, the flow field of a turbulent twin cross-shaped jet is investigated numerically using the standard k-ε model, the Shear Stress Transport (SST) k-ω model and the Reynolds Stress Model (RSM). The results are compared with PIV measurements. The objective is to assess their capability and limitations to predict the significant features of twin jet flow when the flow is numerically resolved through a lobed diffuser. It is shown that the k-ε and RSM models are more appropriate for predicting potential jet core length, the change in jet centreline streamwise velocity, and flow expansion in the symmetry plane of the twin jet flow. However, these models overestimate the overall flow expansion and the jet volumetric flow rate. The SST k-ω model seems more appropriate for the prediction of such dynamic integral quantities. A high level of turbulent kinetic energy predicted by the k-ε and RSM models in the near field of jets is probably the reason for this overestimation of jet induction. The SST k-ω model would appear to be the most appropriate tool for optimizing orifice design, orifice to orifice spacing and relative orifice orientation on a perforated panel diffuser.     

Probing the intrinsic optical quality of CVD grown MoS<Subscript>2</Subscript>

Optical emission efficiency of two-dimensional layered transition metal dichalcogenides (TMDs) is one of the most important parameters affecting their optoelectronic performance.The optimization of the growth parameters by chemical vapor deposition (CVD) to achieve optoelectronic-grade quality TMDs is,therefore,highly desirable.Here,we present a systematic photoluminescence (PL) spectroscopic approach to assess the intrinsic optical and crystalline quality of CVD grown MoS2 (CVD MoS2).We propose the use of the intensity ratio between the PL measured in air and vacuum as an effective way to monitor the intrinsic optical quality of CVD MoS2.Low-temperature PL measurements are also used to evaluate the structural defects in MoS2,via defect-associated bound exciton emission,which well correlates with the field-effect carrier mobility of MoS2 grown at different temperatures.This work therefore provides a sensitive,noninvasive method to characterize the optical properties of TMDs,allowing the tuning of the growth parameters for the development of optoelectronic devices.     

A variable sampling interval Shewhart control chart for monitoring the coefficient of variation in short production runs

Monitoring the coefficient of variation (CV) allows process monitoring to be performed when both the process mean and the standard deviation are not constant but, nevertheless, proportional. Until now, few research papers have investigated the monitoring of the CV in a short production run context. This paper investigates the design and implementation of a Variable Sampling Interval Shewhart control chart to monitor the coefficient of variation in a short production run context. Formulas for the truncated average time to signal are derived and a performance comparison is carried out with a Fixed Sampling Rate Shewhart chart monitoring the CV. An example illustrates the use of this chart on real industrial data.     

A matheuristic approach for optimizing mineral value chains under uncertainty

Optimization and Engineering - Mineral value chains, also known as mining complexes, involve mining, processing, stockpiling, waste management and transportation activities. Their optimization is...