Dynamic infrared study of polyphenylene sulfide using planar array infrared spectroscopy

Planar array infrared (PA-IR) spectroscopy was used to study polyphenylene sulfide (PPS) at room temperature during the application of a sinusoidal elastic deformation. All of the intensity in the dynamic spectra was contained within the in-phase spectrum, which was expected since the measurements were carried out at room temperature, far below the glass transition temperature. The contributions of chain orientation, sample thinning, and stress-induced band shifts were separated in the dynamic spectra. It was found that the effects of chain orientation and sample thinning canceled each other out. Stress-induced band shifts far below the spectral resolution, on the order of 0.01 cm(-1), were quantified and used to calculate the stress optical coefficients and mode Gruneisen parameters for PPS.     

Influence of the crack morphology on the fatigue crack growth rate: A continuously-kinked crack model based on fractals

Threshold condition and rate of fatigue crack growth appear to be significantly affected by the degree of deflection of cracks. In the present paper, the reduction of the fatigue crack growth rate for a so-called ‘periodically-kinked crack’ as compared to that for a straight counterpart is quantified via the Paris–Erdogan law modified according to some simple theoretical arguments. It is shown that such a reduction increases as the value of the kinking angle increases. Then, a so-called ‘continuously-kinked crack’ (the kink length tends to zero) is considered and modelled as a self-similar invasive fractal curve. The sequence of kinking angles in the crack is such that the fatigue crack path is ‘on average’ straight. Using the Richardson’s expression for self-similar fractals, the fractal dimension of the crack is expressed as a function of the kinking angle. It is shown that the fatigue crack growth rate in the Paris range depends not only on the above fractal dimension and in turn on the kinking angle, but also, in an explicit fashion, on the crack length. Some experimental results related to concrete and showing a crack size effect on the fatigue crack growth rate are analysed.     

Vibration Damping Using CCII-Based Inductance Simulators

In this paper, we present an application of second- generation current-conveyor (CCII)-based active inductance simulators to mechanical vibration damping. The oscillation amplitude of a metallic beam, which is near some resonant frequencies, can be reduced by converting mechanical energy into electrical energy through a piezoelectric transducer that is bonded to the beam. An electric circuit, which is made up of the piezoelectric transducer, a resistance, and an inductance, accomplishes the task of dissipating the energy. To this end, the natural frequency of the circuit should be close to the natural frequency of interest of the mechanical system. The high value that is requested for the inductance (thousands of Henrys) can only be achieved through an inductance-simulator circuit. In the literature, the circuit implementations of the inductance simulators are typically based on operational amplifiers, such as the Antoniou circuit. In this paper, we make use of the CCIIs, which allow us to obtain both grounded and floating equivalent inductances that work within a regulated frequency range from three to four decades. The effectiveness of the traditional inductance simulators and CCII-based simulators is discussed, comparing the responses of an experimental mechanical-electrical system, with different circuit implementations, through experimental results. The use of series-resistance compensation, which is obtained through the use of a suitable topology based on the CCIIs, in the implementation of the equivalent inductance, allows one to obtain the best vibration damping, as confirmed by measurements, for all the natural mechanical frequencies of the realized system.     

Synthesis and Biological Evaluation of CTP Synthetase Inhibitors as Potential Agents for the Treatment of African Trypanosomiasis

Acivicin analogues with an increased affinity for CTP synthetase (CTPS) were designed as potential new trypanocidal agents. The inhibitory activity against CTPS can be improved by increasing molecular complexity, by inserting groups able to establish additional interactions with the binding pocket of the enzyme. This strategy has been pursued with the synthesis of α‐amino‐substituted analogues of Acivicin and N1‐substituted pyrazoline derivatives. In general, there is direct correlation between the enzymatic activity and the in vitro anti‐trypanosomal efficacy of the derivatives studied here. However, this cannot be taken as a general rule, as other important factors may play a role, notably the ability of uptake/diffusion of the molecules into the trypanosomes.     

Confocal ultrafast pump-probe spectroscopy: a new technique to explore nanoscale composites

This article is devoted to the exploration of the benefits of a new ultrafast confocal pump-probe technique, able to study the photophysics of different structured materials with nanoscale resolution. This tool offers many advantages over standard stationary microscopy techniques because it directly interrogates excited state dynamics in molecules, providing access to both radiative and non-radiative deactivation processes at a local scale. In this paper we present a few different examples of its application to organic semiconductor systems. The first two are focussed on the study of the photophysics of phase-separated polymer blends: (i) a blue-emitting polyfluorene (PFO) in an inert matrix of PMMA and (ii) an electron donor polythiophene (P3HT) mixed with an electron acceptor fullerene derivative (PCBM). The experimental results on these samples demonstrate the capability of the technique to unveil peculiar interfacial dynamics at the border region between phase-segregated domains, which would be otherwise averaged out using conventional pump-probe spectroscopy. The third example is the study of the photophysics of isolated mesoscopic crystals of the PCBM molecule. Our ultrafast microscope could evidence the presence of two distinctive regions within the crystals. In particular, we could pinpoint for the first time areas within the crystals showing photobleaching/stimulated emission signals from a charge-transfer state.     

Antibody phage display libraries: contributions to oncology

Since the advent of phage display technology, dating back to 1985, antibody libraries displayed on filamentous phage surfaces have been used to identify specific binders for many different purposes, including the recognition of tumors. Phage display represents a high-throughput technique for screening billions of random fusion antibodies against virtually any target on the surface or inside cancer cells, or even soluble markers found in patient serum. Many phage display derived binders targeting important tumor markers have been identified. Selection directed to tumoral cells' surfaces lead to the identification of unknown tumoral markers. Also the improvement of methods that require smaller amounts of cells has opened the possibility to use this approach on patient samples. Robust techniques combining an antibody library displayed on the phage surface and protein microarray allowed the identification of auto antibodies recognized by patient sera. Many Ab molecules directly or indirectly targeting angiogenesis have been identified, and one of them, ramucirumab, has been tested in 27 phase I-III clinical trials in a broad array of cancers. Examples of such antibodies will be discussed here with emphasis on those used as probes for molecular imaging and other clinical trials.     

Increasing the X-ray Diffraction Power of Protein Crystals by Dehydration: The Case of Bovine Serum Albumin and a Survey of Literature Data

Serum albumin is one of the most widely studied proteins. It is the most abundant protein in plasma with a typical concentration of 5 g/100 mL and the principal transporter of fatty acids in plasma. While the crystal structures of human serum albumin (HSA) free and in complex with fatty acids, hemin, and local anesthetics have been characterized, no crystallographic models are available on bovine serum albumin (BSA), presumably because of the poor diffraction power of existing hexagonal BSA crystals. Here, the crystallization and diffraction data of a new BSA crystal form, obtained by the hanging drop method using MPEG 5K as precipitating agent, are presented. The crystals belong to space group C2, with unit-cell parameters a = 216.45 Å, b = 44.72 Å, c = 140.18 Å, β = 114.5°. Dehydration was found to increase the diffraction limit of BSA crystals from ~8 Å to 3.2 Å, probably by improving the packing of protein molecules in the crystal lattice. These results, together with a survey of more than 60 successful cases of protein crystal dehydration, confirm that it can be a useful procedure to be used in initial screening as a method of improving the diffraction limits of existing crystals.     

High Resolution Crystal Structures of the Cerebratulus lacteus Mini-Hb in the Unligated and Carbomonoxy States

The nerve tissue mini-hemoglobin from Cerebratulus lacteus (CerHb) displays an essential globin fold hosting a protein matrix tunnel held to allow traffic of small ligands to and from the heme. CerHb heme pocket hosts the distal TyrB10/GlnE7 pair, normally linked to low rates of O(2) dissociation and ultra-high O(2) affinity. However, CerHb affinity for O(2) is similar to that of mammalian myoglobins, due to a dynamic equilibrium between high and low affinity states driven by the ability of ThrE11 to orient the TyrB10 OH group relative to the heme ligand. We present here the high resolution crystal structures of CerHb in the unligated and carbomonoxy states. Although CO binds to the heme with an orientation different from the O(2) ligand, the overall binding schemes for CO and O(2) are essentially the same, both ligands being stabilized through a network of hydrogen bonds based on TyrB10, GlnE7, and ThrE11. No dramatic protein structural changes are needed to support binding of the ligands, which can freely reach the heme distal site through the apolar tunnel. A lack of main conformational changes between the heme-unligated and -ligated states grants stability to the folded mini-Hb and is a prerequisite for fast ligand diffusion to/from the heme.     

Genotoxic and mutagenic effects of permethrin in mice: Micronuclei analysis in peripheral blood erythrocytes

Pyrethroids such as permethrin are synthetic compounds widely used in the agriculture of many countries to combat plagues and in domestic products, such as acaricides. Not so long ago these chemicals were characterized as non‐toxic for non‐target organisms; however, recent studies have showed that these compounds could present toxic potential for many organisms. In this sense, this study presents genotoxic and mutagenic potential of permethrin administered intraperitoneally in mice under artificial conditions by the use of micronucleus assay in the peripheral blood of these animals. The mice were divided into five groups: group I = negative control (distilled water), group II = positive control (cyclophosphamide), group III = 30% of permethrin LD₅₀ (96 mg/kg), group IV = 50% of permethrin LD₅₀ (160 mg/kg), and group V = 80% of permethrin LD₅₀ (256 mg/kg). The peripheral blood was collected 24, 48, and 72 h after treatment. Results showed that all the tested permethrin dosages presented genotoxic and mutagenic effects 24 h after treatment, which would contradict the classification of this chemical product as moderately toxic, i.e., unable to cause damages to the cell DNA. Microsc. Res. Tech. © 2012 Wiley Periodicals, Inc.