Preparation of conjugated linoleic acid from safflower oil

Synthetically prepared mixtures of conjugated linoleic acid (CLA) are widely used in animal and cell culture studies to investigate the potential effects of the Δ9c, 11t-18:2 isomer found in food products from ruminant animals. Alkali isomerization of linoleic acid is a common method used in the synthesis of a mixture of CLA isomers containing predominantly the Δ9c, 11t-18:2 and Δ10t, 12c-18:2 isomers. Some biological activity might also be mediated by the Δ10t, 12c-18:2 isomer. Currently few published methodologies exist describing procedures for the enrichment of these two isomers. A method is described herein to take advantage of an inexpensive oil, safflower oil, for use in synthesis of CLA and a procedure to enrich the Δ10t, 12c-18:2 isomer.     

Electrical contact resistance between stainless steel bipolar plate and carbon felt in PEFC: A comprehensive study

Bipolar plate represents a key component of Proton Exchange Membrane Fuel Cell (PEFC) with several essential functions, among them the electric connection of elementary cells. Usually made of graphite, this component is studied worldwide in order to develop a commercially viable alternative: different ways have been being investigated, and to date, despite corrosion issues, stainless steel (SS) appears as a good candidate material, but its Electrical Contact Resistance (ECR) can reach unacceptable values when exposed to PEFC environment. This paper offers a comprehensive study of the parameters acting on ECR when using uncoated SS in PEFC: roughness, which influences the surface contact area with carbon baking, bulk composition of the alloy, which influences only partly the nature of passive films, and the composition and structure of passive films, strongly modified by surface treatments and ageing conditions.     

Generation of Inequivalent Generalized Bell Bases

The notion of equivalence of maximally entangled bases of bipartite d–dimensional Hilbert spaces _{d d} is introduced. An explicit method of inequivalent bases construction is presented. PACS: 03.67.-a     

A flexible three-level logistic network design considering cost and time criteria with a multi-objective evolutionary algorithm

Nowadays, time and cost are familiar criteria for every logistic provider, and both have been long treated to be minimized simultaneously. However, the criteria are naturally conflicted even with flexibilities and/or constraints appeared in the logistic networks. This paper is concerned with three-level logistic networks with potential suppliers, distributed centers (DCs), and deterministic demands from available consumers. The networks also benefit from potential direct shipments from suppliers to consumers as long as suppliers and DCs facilities might face limited capacity in their own seasonal supplying and warehousing processes. The goal is (re)configure the networks in order to minimize response time to consumers, transportation cost and facility cost. Therefore, the networks are formulated as multiple criteria decision making problems, which have more than one configuration through the time and cost optimizing at the same time. Due to the flexibility and the constraints, the decision maker(s) needs a set of compromise solutions for the networks that represent optimal configurations based on the objectives without considering prior knowledge. To this end, the problems are formulated into four individual logistic network models varying with the flexibility option and/or the capacitated facilities. To find the compromise solutions, Pareto-based multi-objective evolutionary algorithm, NSGA-II is customized and then utilized to deal with an illustrative case study. The results are analyzed through the two performance measures, hypervolume and the number of optimal solutions obtained so far.     

Subcellular Localization of Acyl-CoA: Lysophosphatidylethanolamine Acyltransferases (LPEATs) and the Effects of Knocking-Out and Overexpression of Their Genes on Autophagy Markers Level and Life Span of A. thaliana

Arabidopsis thaliana possesses two acyl-CoA:lysophosphatidylethanolamine acyltransferases, LPEAT1 and LPEAT2, which are encoded by At1g80950 and At2g45670 genes, respectively. Both single lpeat2 mutant and double lpeat1 lpeat2 mutant plants exhibit a variety of conspicuous phenotypes, including dwarfed growth. Confocal microscopic analysis of tobacco suspension-cultured cells transiently transformed with green fluorescent protein-tagged versions of LPEAT1 or LPEAT2 revealed that LPEAT1 is localized to the endoplasmic reticulum (ER), whereas LPEAT2 is localized to both Golgi and late endosomes. Considering that the primary product of the reaction catalyzed by LPEATs is phosphatidylethanolamine, which is known to be covalently conjugated with autophagy-related protein ATG8 during a key step of the formation of autophagosomes, we investigated the requirements for LPEATs to engage in autophagic activity in Arabidopsis. Knocking out of either or both LPEAT genes led to enhanced accumulation of the autophagic adaptor protein NBR1 and decreased levels of both ATG8a mRNA and total ATG8 protein. Moreover, we detected significantly fewer membrane objects in the vacuoles of lpeat1 lpeat2 double mutant mesophyll cells than in vacuoles of control plants. However, contrary to what has been reported on autophagy deficient plants, the lpeat mutants displayed a prolonged life span compared to wild type, including delayed senescence.     

Interleukin-1β Modulation of the Mechanobiology of Primary Human Pulmonary Fibroblasts: Potential Implications in Lung Repair

Pro-inflammatory cytokines like interleukin-1β (IL-1β) are upregulated during early responses to tissue damage and are expected to transiently compromise the mechanical microenvironment. Fibroblasts are key regulators of tissue mechanics in the lungs and other organs. However, the effects of IL-1β on fibroblast mechanics and functions remain unclear. Here we treated human pulmonary fibroblasts from control donors with IL-1β and used Atomic Force Microscopy to unveil that IL-1β significantly reduces the stiffness of fibroblasts concomitantly with a downregulation of filamentous actin (F-actin) and alpha-smooth muscle (α-SMA). Likewise, COL1A1 mRNA was reduced, whereas that of collagenases MMP1 and MMP2 were upregulated, favoring a reduction of type-I collagen. These mechanobiology changes were functionally associated with reduced proliferation and enhanced migration upon IL-1β stimulation, which could facilitate lung repair by drawing fibroblasts to sites of tissue damage. Our observations reveal that IL-1β may reduce local tissue rigidity by acting both intracellularly and extracellularly through the downregulation of fibroblast contractility and type I collagen deposition, respectively. These IL-1β-dependent mechanical effects may enhance lung repair further by locally increasing pulmonary tissue compliance to preserve normal lung distension and function. Moreover, our results support that IL-1β provides innate anti-fibrotic protection that may be relevant during the early stages of lung repair.     

Integration of photocatalysis and membrane distillation for removal of mono- and poly-azo dyes from water

The paper reports investigations on the application of anatase-phase TiO₂ for the removal of azo dyes in a hybrid system coupling photocatalysis with direct contact membrane distillation (DCMD, MD). The process was conducted in a laboratory-scale installation equipped with a PP capillary module. The influence of reaction temperature and initial concentration of azo dyes on the effectiveness of their photodegradation was especially investigated. Two mono-azo dyes: Acid Red 18 (AR18) and Acid Yellow 36 (AY36) and one poly-azo dye, Direct Green 99 (DG99) were applied as model compounds. The increase of the reaction temperature from 313 to 333 K resulted in an improvement of the efficiency of photodecomposition of the dyes, as was found on the basis of changes of their masses in the feed solution. The comparison of the results obtained during photocatalysis alone and hybrid photocatalysis-MD process revealed that the reduction of feed volume in MD did not affect the photodegradation rate of the azo dyes. An improvement of the effectiveness of the degradation of dyes was obtained by an application of solutions with lower initial concentration (10 instead of 30 mg/dm³). Regardless of the process parameters applied, the product (distillate) was almost pure water with conductivity lower than 0.3 mS/m and pH above 5.2.     

Mathematical Modeling of Drying Kinetics for Apricots: Influence of the External Resistance to Mass Transfer

The drying curves of halved and deseeded apricots obtained during convective drying at different temperatures (from 50 to 90°C) have been examined, and a diffusional model, solved by a finite elements method, has been proposed to simulate the drying kinetics. The importance of taking into account both the internal and the external resistances to mass transfer when modeling the drying curves is discussed. Due to the geometry of halved apricots as a hemisphere losing water only through the flat section, the mass transfer coefficient (k_c) was not correctly estimated through an empirical correlation. Only the identification of this coefficient from the experimental results allowed an accurate simulation, decreasing the mean relative error from 12.3±3.8% when k_c was calculated through the Pasternak and Gauvin correlation to 2.9±1.0% when k_c was identified.     

Fracture Toughness to Understand Stretch-Flangeability and Edge Cracking Resistance in AHSS

The edge fracture is considered as a high risk for automotive parts, especially for parts made of advanced high strength steels (AHSS). The limited ductility of AHSS makes them more sensitive to the edge damage. The traditional approaches, such as those based on ductility measurements or forming limit diagrams, are unable to predict this type of fractures. Thus, stretch-flangeability has become an important formability parameter in addition to tensile and formability properties. The damage induced in sheared edges in AHSS parts affects stretch-flangeability, because the generated microcracks propagate from the edge. Accordingly, a fracture mechanics approach may be followed to characterize the crack propagation resistance. With this aim, this work addresses the applicability of fracture toughness as a tool to understand crack-related problems, as stretch-flangeability and edge cracking, in different AHSS grades. Fracture toughness was determined by following the essential work of fracture methodology and stretch-flangeability was characterized by means of hole expansions tests. Results show a good correlation between stretch-flangeability and fracture toughness. It allows postulating fracture toughness, measured by the essential work of fracture methodology, as a key material property to rationalize crack propagation phenomena in AHSS.