Thermodynamic Modeling of Alkali Metal Oxide-Silica Binary Melts

The evaluation of the thermodynamic properties as well as the phase diagrams for the binary Na₂O–SiO₂, K₂O–SiO₂, and Li₂O–SiO₂ systems are carried out with a structural model for silicate melts and glasses. This thermodynamic model is based on the assumption that each metallic oxide produces the depolymerization reaction of silica network with a characteristic free-energy change. A least squares optimization program permits all available thermodynamic and phase diagram data to be optimized simultaneously. In this manner, data for these binary systems have been analyzed and represented with a small number of parameters. The resulting equations represent the thermodynamic and phase diagram data for these alkali metal oxide–silica systems within experimental error limits. In particular, the measured limiting liquidus slope at     is well reproduced.     

Twin-image suppression in digital in-line holography based on wave-front filtering

Pattern Analysis and Applications - Digital holography is an imaging process able to recreate three-dimensional representations of objects from recording pattern interference among distinct waves....     

How the risk of failure in lifetime of tempered glass depends on the size of NiS inclusions and heat soak test duration

The probability of breakage in service lifetime of heat-tempered glass panes contaminated by nickel sulfide inclusions is estimated with a multiscale micromechanically motivated statistical theory, which considers the effects of the heat soak test (HST). Short and long HSTs differently affect the phase transformation of NiS of diverse chemical composition, whose increase in volume can break the glass. The main hypothesis, corroborated by experiments, is that there is a lower limit for the size of NiS stones below which no crack can be initiated from the volumetric expansion. The catastrophic propagation of nucleated fractures in the long term is modeled through a rescaled critical stress intensity factor, which accounts for the subcritical crack propagation and the slow phase transformation of NiS. A parametric analysis evidences how the failure probability is strongly affected by these parameters, depending on the holding time in the HST. Tailored experimental activity is suggested for the proper calibration of the model.     

Mid‐infrared spectroscopy as a tool for real‐time monitoring of ethanol absorption in glycols

Fast, simple, accurate, and inexpensive methods for obtaining analyte concentration data are desirable in the industrial sector. In the present study, the use of Fourier transform mid‐infrared (FT‐MIR) spectroscopy, combined with partial least squares (PLS) regression, was investigated as a tool for real‐time monitoring of processes of ethanol absorption in glycols. Calibration was performed using simple synthetic samples containing ethanol, water, and monoethylene glycol (MEG) or diethylene glycol (DEG). The PLS models presented excellent performance, with correlation coefficients (R²) close to unity and root‐mean‐square errors of cross‐validation (RMSECV) and prediction (RMSEP) lower than 2% of the calibration data ranges for both analytes (ethanol and water) in both absorbents (MEG and DEG). The monitoring technique developed has potential to be applied in absorption processes and could also be used in other large‐scale unit operations, providing information in real time and enhancing process control.     

Influence of deposited amine-functionalized Si-MCM-41 in polyacrylonitrile electrospun membranes applied for separation of water in oil emulsions

Among several oil/water emulsion separation technologies, the utilization of nanoparticle-decorated membranes with diverse functionalities has received considerable attention in recent years, particularly if the antifouling capacity can be improved. In this article, we propose a new membrane based on surface-hydrolyzed polyacrylonitrile electrospun membranes and/or decorated with amine-functionalized Si-MCM-41 nanoparticles to be used as oil/water emulsion separation treatment and to determine their antifouling ability. X-Ray photoelectron spectrometry, attenuated total reflectance Fourier transform infrared spectroscopy, and toluidine blue O assay, scanning electron microscopy, contact angle measurements for oil under water and thermogravimetry were used for characterizing the membranes and an assay of permeability was developed to quantify the diffusion of oil molecules across the electrospun membrane. The electrospun and/or decorated membranes showed an underwater oleophobic wettability, which can separate oil-in-water emulsions with 87% separation efficiency, results of fouling experiments, evaluated in terms of rejection and flux recovery ratio, exhibited good antifouling ability, but the membrane decoration process did not lead to superior outcomes compared with undecorated membranes.     

Influence of the corrosion products of copper on its atmospheric corrosion kinetics in tropical climate

In the present paper, the identification of the corrosion product phases formed on copper under different atmospheres of Cuban tropical climate is reported. Cuprite (Cu₂O), paratacamite (Cu₂Cl(OH)₃), posnjakite (Cu₄SO₄(OH)₆ · 2H₂O) and brochantite (Cu₄SO₄(OH)₆) were the main phases identified by X-ray diffraction (XRD) analysis and Fourier transform infrared spectroscopy (FTIR).Copper corrosion products are known to have a protective effect against corrosion. However, a different behaviour was obtained under sheltered coastal conditions. This can be due to the corrosion products morphology and degree of crystallisation, rather than their phase composition. A higher time of wetness and the accumulation of pollutants not washed away from the metal surface can also play an important role.     

Recommending multimedia visiting paths in cultural heritage applications

The valorization and promotion of worldwide Cultural Heritage by the adoption of Information and Communication Technologies represent nowadays some of the most important research issues with a large variety of potential applications. This challenge is particularly perceived in the Italian scenario, where the artistic patrimony is one of the most diverse and rich of the world, able to attract millions of visitors every year to monuments, archaeological sites and museums. In this paper, we present a general recommendation framework able to uniformly manage heterogeneous multimedia data coming from several web repositories and to provide context-aware recommendation techniques supporting intelligent multimedia services for the users—i.e. dynamic visiting paths for a given environment. Specific applications of our system within the cultural heritage domain are proposed by means of real case studies in the mobile environment related both to an outdoor and indoor scenario, together with some results on user’s satisfaction and system accuracy.     

3D Surface Reconstruction of Noisy Point Clouds Using Growing Neural Gas: 3D Object/Scene Reconstruction

With the advent of low-cost 3D sensors and 3D printers, scene and object 3D surface reconstruction has become an important research topic in the last years. In this work, we propose an automatic (unsupervised) method for 3D surface reconstruction from raw unorganized point clouds acquired using low-cost 3D sensors. We have modified the growing neural gas network, which is a suitable model because of its flexibility, rapid adaptation and excellent quality of representation, to perform 3D surface reconstruction of different real-world objects and scenes. Some improvements have been made on the original algorithm considering colour and surface normal information of input data during the learning stage and creating complete triangular meshes instead of basic wire-frame representations. The proposed method is able to successfully create 3D faces online, whereas existing 3D reconstruction methods based on self-organizing maps required post-processing steps to close gaps and holes produced during the 3D reconstruction process. A set of quantitative and qualitative experiments were carried out to validate the proposed method. The method has been implemented and tested on real data, and has been found to be effective at reconstructing noisy point clouds obtained using low-cost 3D sensors.     

Structural design using multi-objective metaheuristics. Comparative study and application to a real-world problem

Many structural design problems in the field of civil engineering are naturally multi-criteria, i.e., they have several conflicting objectives that have to be optimized simultaneously. An example is when we aim to reduce the weight of a structure while enhancing its robustness. There is no a single solution to these types of problems, but rather a set of designs representing trade-offs among the conflicting objectives. This paper focuses on the application of multi-objective metaheuristics to solve two variants of a real-world structural design problem. The goal is to compare a representative set of state-of-the-art multi-objective metaheuristic algorithms aiming to provide civil engineers with hints as to what optimization techniques to use when facing similar problems as those selected in the study presented in this paper. Accordingly, our study reveals that MOCell, a cellular genetic algorithm, provides the best overall performance, while NSGA-II, the de facto standard multi-objective metaheuristic technique, also demonstrates a competitive behavior.