High-quality zinc oxide (ZnO) nanowires were synthesized using the atmospheric chemical vapor deposition technique and were appropriately characterized. Subsequently, the nanowire surface was covalently grafted with 1-pyrenebutyric acid (PBA) fluorophore, and surface-sensitive X-ray photoelectron spectroscopy and Fourier transform infrared-attenuated total reflectance spectroscopy were utilized to confirm the functionalization of 1-pyrenebutyric acid on the nanowire surface. Additionally, photoluminescence (PL) measurements were used to evaluate the optical behavior of pristine nanowires. Through fluorescence quenching of 1-pyrenebutyric acid by p-nitrophenol, a detection limit of 28 ppb was estimated. Based on these findings, ZnO nanowires functionalized with 1-pyrenebutyric acid are envisaged as extremely sensitive platforms for the ultra-trace detection of p-nitrophenol in biological systems. 相似文献
Presently, there are numerous applications for non-destructive techniques like emission tomography, laser based methods and particle image velocimetry that are used to study flame characteristics. Reconstruction of the flame intensity field using emission tomography has the advantage over other technologies that it gives accurate results but at the same time requires relatively inexpensive equipment, and therefore, has numerous industrial applications. In the present paper, a new algorithm performing Direct-3D reconstruction using the maximization of entropy (MENT) methodology has been introduced. Through detailed studies using a mathematical object, it has been shown that the Direct-3D algorithm shows significantly reduced errors as compared to 2D slice-by-slice reconstruction algorithms. Secondly, the major features of the proposed algorithm, for e.g., effect of orientation, effect of number of views, and robustness have been discussed. Finally, a few qualitative results from actual flames have been presented using a candle and a gas fired burner, and the results match well with the actual flame geometry and intensity distribution. 相似文献
We report investigations on polycrystalline LaCo1?xAlxO3 (x = 0–0.9) bulk samples. The solid state synthesized samples showed a coexistence of rhombohedral and monoclinic phases in the intermediate concentrations (0.2 ≤ x ≤ 0.5) and pure rhombohedral phase otherwise. The observed effect of Al doping on dc transport has been analysed on the basis of small polaron hopping mechanism. The magnetisation results presented give evidence of weak ferromagnetism and anomalous temperature dependence of coercivity which we associate to the canting of the localised high-spin Co(III) and anti-symmetric exchange interactions at low temperatures. 相似文献
Compositions of La1- x Ba x CuO3, where x ranges from 0.0 to 0.5, were fired in air, oxygen-enriched air, and oxygen. Studies show that BaO cannot make a solid solution with LaCuO3 without changing the basic structure. The resulting phases, in all attempts, were the binary compounds La2CuO4, La1- x Ba x CuO3-δ ( x = 0.2 to 0.5), or their mixtures. All samples showed metallic conductivity. Extra oxygen in the reaction atmosphere appeared to encourage the formation of the LaCuO3-based phases of La1- x Ba x CuO3-δ ( x = 0.2 or 0.5). We provide a defect-chemical and thermodynamical explanation for this observation. 相似文献
The thermoeconomic behaviour of a nanoparticle seeded single effect LiBr‐H2O absorption refrigeration system (ARS) is investigated for a small scale application. In the proposed method, alumina nanoparticles with volume concentrations of 3%, 5%, and 7% are dispersed into an aqua lithium bromide solution. The multiobjective heat transfer search algorithm is employed to examine the design trade‐off between the coefficient of performance (COP) and total annualized cost (TAC). To analyze the overall performance of the system, the influence of five design parameters, namely the temperatures of the generator, absorber, evaporator, condenser and heat exchanger pipe diameter, are studied. It is found that with an increase in the COP, the TAC of the system is initially raised marginally, and after that, raised rigorously with further increment. The comparative results indicate that the COP and TAC of the nanofluid based ARS system are increased by about 7% and decreased by about 3.2%, respectively, corresponding to the Pareto points of the base ARS system. A lower break‐even point of about 2.6 years is achieved for the ARS system containing nanoparticles compared to the base ARS system. Overall, the ARS system containing 5% nanoparticles is the best solution from a thermodynamic and economic point of view. 相似文献
Objective: Innovation in material science has made it possible to fabricate a pharmaceutical material of modifiable characteristics and utility, in delivering therapeutics at a sustained/controlled rate. The objective of this study is to design and optimize the controlled release transdermal films of S-Amlodipine besylate by intercalating hydrophilic and hydrophobic polymers.
Methods: 3(2) factorial design and response surface methodology was utilized to prepare formulations by intercalating the varied concentration of polymers(A) and penetration enhancer(B) in solvent. The effect of these independent factors on drug release and flux was investigated to substantiate the ex-vivo, stability and histological findings of the study.
Results: FTIR, DSC revealed the compatibility of drug with polymers; however, the semicrystallinity in drug was observed under PXRD. SEM micrographs showed homogeneous dispersion and entanglement of drug throughout the matrix. Results from the permeation study suggested the significant effect of factors on the ex vivo permeation of drug. It was observed that drug release was found to be increased with an increase in hydrophilic polymer concentration and PE. The formulations having polymers (EC:PVPK-30) at 7:3 showed maximum drug release with highest flux (102.60?±?1.12?µg/cm2/h) and permeability coefficient (32.78?±?1.38?cm/h). Significant effect of PE on lipid and protein framework of the skin was also observed which is responsible for increased permeation. The optimized formulation was found to be stable and showed no-sign of localized reactions, indicating safety and compatibility with the skin.
Conclusion: Thus, results indicated that the prepared intercalated transdermal matrix can be a promising nonoral carrier to deliver effective amounts of drug. 相似文献
The influence of heat treatment, at 450°C in Ar environment, on oxygenated (6.72 < 7 – < 6.93) samples of R1–xCaxBa2Cu3O7– (i.e. R(Ca)-123, with R = Y, Sm) with 0 < x < 0.3 has been investigated. Measurements of oxygen loss, normal state resistivity behaviour (T), superconducting critical temperature Tc and transition widths reveal that Ar treatment effects both the series differently. The Sm(Ca)-123 samples, for all values of x, show a considerable loss of oxygen ((x) = 0.4 to 0.6) and decrease in Tc (Tc(x) = 35 to 55 K). Whereas, surprisingly, the Y(Ca)-123 samples show a much smaller loss of oxygen ((x) = 0 to 0.3), along with a decrease in Tc for x < 0.2 and an increase in it for x > 0.2. In particular, the x = 0.3 sample shows a negligible change in oxygen content accompanied by an increase of 20 K in Tc. These and host of other observations suggest that the presence of Ca may influence the oxygen loss mechanism in these series. 相似文献