Springtime Monitoring of Passive Cool Roofs in Subtropical Climate

Passive strategies for acclimatization of buildings have been studied by several authors in many countries, especially the evaporative and radiant cooling techniques. Fiber cement tiles are very common in popular constructions due to their low cost. However, they have over twice of the value thermal transmittance indicated to this bioclimatic zone according to Brazilian guidelines. The objective is to present an alternative to reduce high temperatures on fiber cement tiles. In this paper, the monitoring of passive cooling of roofing during the spring season in a city with subtropical climate is described. Single and combined reflective and evaporative cooling systems were studied in different environmental conditions. Internal surface temperatures of tiles were monitored together with weather variables. Results show a decrease of about 6 ℃, 9 ℃, 10 ℃ and 11 ℃ as compared to the original tiles according to environment conditions and the combined passive cooling techniques. These results allow for the conclusion that the use of passive cooling techniques opens up new possibilities to attenuate the internal surface temperatures of tiles and to consequently decrease the roofing solar heat gain into buildings, thus, providing less air cooling energy consumption.     

Fatigue crack growth rates of API X70 pipeline steel in a pressurized hydrogen gas environment

Hydrogen is known to have a deleterious effect on most engineering alloys. It has been shown repeatedly that the strength of steels is inversely related to the ductility of the material in hydrogen gas. However, the fatigue properties with respect to strength are not as well documented or understood. Here, we present the results of tests of the fatigue crack growth rate (FCGR) on API X70 from two sources. The two materials were tested in air, 5.5 and 34 MPa pressurized hydrogen gas, and at both 1 and 0.1 Hz. At these hydrogen pressures, the FCGR increases above that of air for all values of the stress intensity factor range (ΔK) greater than ~7 MPa · m^1/2. The effect of hydrogen is particularly sensitive at values of ΔK below ~15 MPa · m^1/2. That is, for values of ΔK between 7 and 15 MPa · m^1/2, the FCGR rapidly increases from approximately that found in air to as much as two orders of magnitude above that in air. Above 15 MPa · m^1/2, the FCGR remains approximately one to two orders of magnitude higher than that of air.     

Dilute mixed-acid pretreatment of sugarcane bagasse for ethanol production

Integral utilisation of bagasse is a high priority for the diversification of the sugarcane industry. The application of a biorefinery philosophy to bagasse utilisation requires its fractionation into its main components: cellulose, hemicelluloses and lignin. The first stage in that process is the pretreatment, in which a considerable part of hemicelluloses is solubilised, and cellulose is activated towards enzymatic hydrolysis. In this work, a pretreatment method using a mixture of sulfuric and acetic acid is investigated. Two different solid-to-liquid ratios (1.5:10 and 1:10) were used in the pretreatment. Both conditions efficiently hydrolysed the hemicelluloses giving removals above 90%. The extractive components were also effectively solubilised, and lignin was only slightly affected. Cellulose degradation was below 15%, which corresponded to the low crystallinity fraction. The analysis of the morphology of pretreated bagasse confirmed the results obtained in the chemical characterization.     

Modifications in the molecular structure of hydroxyapatite induced by titanium ions

The purpose of this study was to contribute to the understanding of the effect of titanium ions released from a metallic substrate on the molecular structure of hydroxyapatite. The effects of pH, time of incubation and concentration of titanium ions were investigated. The solids were analysed by X-ray diffraction, Fourier transform infrared spectroscopy, Fourier transform Raman spectroscopy, energy dispersive X-ray analysis and thermogravimetric analysis. The results clearly indicate the presence of a titanium phosphate, Ti(HPO₄)₂·nH₂O (n=1–3), which probably has a double layered structure. The formation of this compound is dependent on the titanium concentration and its crystallinity increases with the time of incubation.     

Treatment of lupus crisis with IgIV

BACKGROUND: Intravenous Immunoglobulin (i.v.Ig) has been advocated as efficacious for Systemic Lupus Erytematosus (SLE) and Lupic Nephritis (LN) using high dosages, propitious a prolonged remission of SLE. MATERIAL AND METHOD: We show the case of a male patient 16 years old, with SLE diagnosis until 1993, and LN phase IV. He attend to hospital with a Lupic Crisis, positives ANAs, DNAds, ScL 427, C3 45, C4 13, IgG 179, urinary sediment: leukocytes 30-40 xc, erythrocytes 8-10 xc. Renal failure: BUN 243, seric Cr: 10.16. I.v. Ig administrated 400 mgs k do. And nephrologic assistance, NK. RESULTS: There was improvement after infusion, clinical and serological, persisting with renal failure. The mechanism by which i.v. Ig might have effected improvement in this patient was reviewed. CONCLUSION: The use in our patient with SLE and LN was satisfactory. Is difficult affirm categorical the outcome or failure of i.v. Ig in patients with SLE, even report founded are only few cases report.     

Technology trends toward a system-in-a-module in power electronics

Currently, assemblies of power semiconductor switches and their associated drive circuitry are available in modules. From a few 100 watts downward, one finds silicon monolithic technology as the integration vehicle, while upward into the multi-kilowatt range, mixed mode module construction is used. This incorporates monolithic, hybrid, surface mount and wirebond technology. However, a close examination of the applications in motor drives and power supplies indicates that there has been no dramatic volume reduction of the subsystem. The power semiconductor modules have shrunk the power switching part of the converter, but the bulk of the subsystem volume still comprises the associated control, sensing, electromagnetic power passives and interconnect structures. The paper addresses the improvement of power processing technology through advanced integration of power electronics. The goal of a subsystem in a module necessitates this advanced integration. The central philosophy of this technology development research is to advance the state of the art by providing the concept of integrated power electronics modules (IPEMs). The technology underpinning such an IPEM approach is discussed. The fundamental functions in electronic power processing, the materials, processes and integration approaches and future concepts are explained.     

A three-level converter and its applicationto power factor correction

The first part of this paper introduces a novel three-level dc-dc converter topology. It is shown that a floating capacitor connected across the clamping diodes of a conventional three-level converter enables phase-shift control while retaining zero voltage switching. Design constraints and experimental results are shown for a 6-kW, 100-kHz dc-dc prototype. The second part of the paper discusses the same three-level topology operated as a single-stage front-end converter. In this application, the converter realizes power factor correction and dc output voltage regulation. To ensure low harmonic distortion, the input currents are operated in discontinuous conduction mode, and the performance, including soft switching, is also verified on a 3-kW, 50-kHz ac-dc converter.     

Papain hydrolysates of casein: molecular weight profile and encapsulation in lipospheres

Some reaction parameters were tested in the hydrolysis of casein by papain, in order to prepare hydrolysates with high oligopeptide contents, for either dietetic or pharmaceutical purposes. Five casein hydrolysates were prepared and then fractionated by size‐exclusion HPLC. The rapid correct fraction area method was used for quantifying peptides and free amino acids. Among the five reaction conditions tested, three produced similar peptide profiles. However, the use of a temperature of 37°C and an E:S ratio of 2% is probably the most economical condition for use in large‐scale manufacture. With the aim of masking the bitterness of these preparations, a new method, based on the encapsulation in lipospheres, was used. Also, second derivative spectrophotometry was used for the first time to measure the extent of encapsulation of protein hydrolysates, which changed from 50% to 83%. Moreover, the efficiency of this system was evaluated by analysing other parameters, which showed a reduction of hydrophobicity and bitterness of all samples, as well as good chemical stability during 60 days of storage under refrigeration. The electron microscopical analysis of liposheres showed an average size around 5.0 ± 1.0 µm. Copyright © 2004 Society of Chemical Industry     

Full-wave analysis of a nonradiative dielectric waveguide with apseudochiral Ω-slab

This paper presents a new microwave device - a non-radiative dielectric (NRD) waveguide with a dielectric pseudochiral Ω-slab - the Ω-NRD waveguide. A rigorous full-wave analysis is presented and the modal equations for the longitudinal-section magnetic (LSM) and longitudinal-section electric (LSE) modes are derived. The dispersion curves and operational diagrams for the first hybrid LSM modes are presented. The effect of the pseudochiral Ω-medium is discussed. New interesting modal features are revealed, showing that the propagation characteristics may differ considerably from the common isotropic case     

Analysis of viral and cellular parameters which affect the fusion process of influenza viruses

In the present investigation we studied the fusogenic process developed by influenza A, B and C viruses on cell surfaces and different factors associated with virus and cell membrane structures. The biological activity of purified virus strains was evaluated in hemagglutination, sialidase and fusion assays. Hemolysis by influenza A, B and C viruses ranging from 77.4 to 97.2%, from 20.0 to 65.0% from 0.2 to 93.7% and from 9.0 to 76.1% was observed when human, chicken, rabbit and monkey erythrocytes, respectively, were tested at pH 5.5. At this pH, low hemolysis indexes for influenza A, B and C viruses were observed if horse erythrocytes were used as target cells for the fusion process, which could be explained by an inefficient receptor binding activity of influenza on N-glycolyl sialic acids. Differences in hemagglutinin receptor binding activity due to its specificity to N-acetyl or N-glycolyl cell surface oligosaccharides, density of these cellular receptors and level of negative charges on the cell surface may possibly explain these results, showing influence on the sialidase activity and the fusogenic process. Comparative analysis showed a lack of dependence between the sialidase and fusion activities developed by influenza B viruses. Influenza A viruses at low sialidase titers (< 2) also exhibited clearly low hemolysis at pH 5.5 (15.8%), while influenza B viruses with similarly low sialidase titers showed highly variable hemolysis indexes (0.2 to 78.0%). These results support the idea that different virus and cell-associated factors such as those presented above have a significant effect on the multifactorial fusion process.