Scalable and fault‐tolerant key agreement protocol for dynamic groups

With the widespread use of the Internet, the popularity of group communication‐based applications has grown considerably. Since most communications over the Internet involve the traversal of insecure networks, basic security services are necessary for these collaborative applications. These security services can be facilitated if the authorized group members share a common secret. In such distributed applications, key agreement protocols are preferred to key distribution protocols. In the past two decades, there have been many proposals for key agreement protocols. Most of these protocols are not efficient and limit the size of the underlying group. In this paper, we consider the scalability problem in group key agreement protocols. We propose a novel framework based on extension of the Diffie–Hellman key exchange protocol. The efficiency of our protocol comes from the clustering of the group members, where the common session key is established collaboratively by all participants. We present the auxiliary protocols needed when the membership changes. We show that our protocol is superior in complexity in both communication and computation overheads required to generate the session key. Copyright © 2006 John Wiley & Sons, Ltd.     

Analysis and Software Implementation of a Robust Synchronizing PLL Circuit Based on the pq Theory

This paper presents the analysis and software implementation of a robust synchronizing circuit, i.e., phase-locked loop (PLL) circuit, designed for use in the controller of active power line conditioners. The basic problem consists of designing a PLL circuit that can track accurately and continuously the positive-sequence component at the fundamental frequency and its phase angle even when the system voltage of the bus, to which the active power line conditioner is connected, is distorted and/or unbalanced. The fundamentals of the PLL circuit are discussed. It is shown that the PLL can fail in tracking the system voltage during startup under some adverse conditions. Moreover, it is shown that oscillations caused by the presence of subharmonics can be very critical and can pull the stable point of operation synchronized to that subharmonic frequency. Oscillations at the reference input are also discussed, and the solution of this problem is presented. Finally, experimental and simulation results are shown and compared     

Reduction of electromyographic noise in the signal-averaged electrocardiogram by spectral decomposition

This paper proposes a technique to improve the quality of high-resolution electrocardiogram by weighting the coherent average of beats by a function of the energy of the corrupting myoelectric noise, prior to subsequent detection of ventricular late potentials. The results obtained with 20 patients indicate the method requires fewer beats than conventional nonweighted average to achieve the same noise level.     

Separation of recombinant human erythropoietin glycoforms by capillary electrophoresis using volatile electrolytes. Assessment of mass spectrometry for the characterization of erythropoietin glycoforms

The separation of the glycoforms of erythropoietin (EPO) by capillary electrophoresis (CE) was recently published as a monograph by the European Pharmacopoeia (European Pharmacopoeia 4 2002, 1316, 1123-1128). Although the experimental CE conditions employed a background electrolyte containing additives suitable for on-line UV-absorption detection, they were not appropriate for on-line mass spectrometry (MS) detection. In this work, an attempt was made to investigate experimental conditions employing volatile electrolyte systems to achieve the separation and characterization of EPO glycoforms using CE and ESI-MS methodologies. The influence of several operating conditions, such as the coating of the internal walls of the capillary as well as the composition, concentration, and the pH of the separation buffer were investigated. The results demonstrated that when the internal walls of the capillaries were permanently coated with Polybrene and a buffer electrolyte containing 400 mM of HAc-NH4Ac (acetic acid-ammonium acetate), pH 4.75, was used, a significantly reproducible separation was achieved for EPO glycoforms. Intact EPO was characterized by two mass spectrometry techniques: electrospray ionization (ESI-MS) and matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF-MS). The data demonstrated that MALDI-TOF-MS provided a good approximation to an average molecular mass of the EPO molecule. However, it was still necessary to carry out further separation of the intact EPO glycoforms in order to obtain molecular mass information when ESI-MS was used.     

Albumin adsorption on Cibacron Blue F3G-A immobilized onto oligo(ethylene glycol)-terminated self-assembled monolayers

Self-assembled monolayers can be tailored with specific ligands to a certain protein and at the same time prevent the non-specific adsorption of other proteins. Cibacron Blue F3G-A (CB-thiol) was successfully immobilized onto tetra(ethylene glycol)-terminated alkanethiol (CB-thiol). The affinity of human serum albumin (HSA) to immobilized Cibacron Blue F3G-A was studied using mixed thiolate self-assembled monolayers on gold with different n-alkyl chain lengths and functional terminal groups (CH₃-; OH- and tetra(ethylene glycol)). Surfaces were characterized using X-ray photoelectron spectroscopy and water contact angle measurements. Albumin adsorption and exchangeability of the adsorbed albumin molecules with other albumin molecules in solution were evaluated using ¹²⁵I-radiolabeled HSA. Competitive adsorption between albumin and fibrinogen to the different self-assembled monolayers (SAMs) was also investigated. Results showed that the incorporation of CB-thiol on the monolayers does not increase the HSA adsorption and reversibility on the SAMs. However, although specific adsorption of HSA to the immobilized Cibacron Blue F3G-A was not demonstrated, the presence of CB-thiol decreases the affinity of fibrinogen to the OH-terminated SAMs.     

Reference spectra to classify Amazon water types

Reference spectra extracted from spectral libraries can distinguish different water types in images when associated with limnological information. In this study, we compiled available databases into a single spectral library, using field water reflectance spectra and limnological data collected by different researchers and campaigns in the Amazonian region. By using an iterative clustering procedure based on the combination of reflectance and optically active components (OACs), reference spectra representative of the major Amazonian water types were defined from this library. Differences between the resultant limnological classes were also evaluated by paired t-tests at significance level 0.05. Finally, reference spectra were tested for Spectral Angle Mapper (SAM) classification of waters in Hyperion/Earth Observing-One (EO-1) and Medium Resolution Imaging Spectrometer (MERIS)/Environment Satellite (Envisat) images acquired simultaneously as the field campaigns. Results showed highly variable concentrations of OACs due to the complexity of the Amazonian aquatic environments. Ten classes were defined to represent this complexity, broadly grouped into four limnological characteristics: clear waters with low concentrations of OACs (class 1); black waters rich in dissolved organic carbon (DOC) (class 2); waters with large concentrations of inorganic suspended solids (ISSs) (classes 3–7); and waters dominated by chlorophyll-a (chl-a) (classes 8–10). Using the ten reference spectra, SAM classification of the field water curves produced an overall accuracy of 86% with the highest values observed for classes 3, 4, 6 and 7 and the lowest accuracy for classes 1 and 2. The results of paired t-tests confirmed the class differences based on the concentrations of OACs. SAM classification of the Hyperion and MERIS images using ground truth information resulted in overall classification accuracies of 48% and 67%, respectively, with the highest errors associated with specific portions of the scenes that were not adequately represented in the spectral library.     

A mixed pixel- and region-based approach for using airborne laser scanning data for individual tree crown delineation in Pinus radiata D. Don plantations

The aim of this study was to evaluate the use of high-resolution airborne laser scanner (ALS) data to detect and measure individual trees. We developed and tested a new mixed pixel- and region-based algorithm (using Definiens Developer 7.0) for locating individual tree positions and estimating their total heights. We computed a canopy height model (CHM) of pixel size 0.25 m from dense first-pulse point data (8 pulses m^?2) acquired with a small-footprint discrete-return lidar sensor. We validated the results of individual tree segmentation with accurate field measurements made in 37 plots of Monterey pine (Pinus radiata D. Don) distributed over an area of 36 km². Fieldwork consisted of labelling all of the trees in each plot and measuring their height and position, for posterior integration of the data from both sources (field and lidar). The proposed algorithm correctly detected and linked 59.8% of the trees in the 37 sample plots. We also manually located the trees by using FUSION software to visualize the raw lidar data cloud. However, because the latter method is extremely time-consuming, we only considered 10 randomly selected plots. Manual location correctly detected and linked 71.9% of the trees (in this subsample the algorithm correctly detected and measured 63.5% of the trees). The R² values for the linear model relating field- and lidar-measured heights of the linked trees located manually and with the automatic location algorithm were 0.90 and 0.88, respectively.     

Processing of short fiber reinforced polypropylene. II: Statistical study of the effects of processing conditions on the impact strength

Within the general objective of analyzing and modeling the processability of polypropylene and of its short fiber composites, a statistical analysis of the relationship between processing conditions and final properties has been performed applying modern experimental design concepts. In order to gather the largest amount of information with a manageable quantity of experiments, Taguchi methods were used for the design of injection molding tests and for the analysis of experimental fiber orientation and impact strength results. Two levels of each variable of interest were selected, and the results of the analysis not only show which of the processing variables are predominant but also show that interactions between variables must be taken into account. The approach presented here offers a viable route to the scaling-up of the injection molding process through the reduction of the number of variables in the prediction of the processing behavior of semicrystalline polymers and of their composites.