Comparison of different Brazilian citrus by-products as source of natural antioxidants

Significant amounts of citrus by-products remain after juice processing, which is then used to obtain pectin. The pectin industry then generates a new waste. No study has characterized this residue or suggested applications for it. The main goal of this study was to compare citrus industrial by-products that remain after juice (CJB) and pectin (CPB) extraction, aiming to obtain bioactive compounds. The residues were evaluated for their chemical composition, antioxidant capacity, and polyphenols content. CJB had 2-fold higher total phenols than CPB. Moreover, CJB exhibited higher antioxidant capacity than CPB. Nine polyphenols were detected; hesperidin was the main compound on both residues. CPB had higher content of polyphenols than CJB, which can be attributed to the industry procedure of pectin extraction. Thus, this study provides support for the reuse of CPB to obtain nutraceutical compounds, converting waste into added-value products.     

The Sedentary Lifestyle and Masticatory Dysfunction: Time to Review the Contribution to Age-Associated Cognitive Decline and Astrocyte Morphotypes in the Dentate Gyrus

As aging and cognitive decline progresses, the impact of a sedentary lifestyle on the appearance of environment-dependent cellular morphologies in the brain becomes more apparent. Sedentary living is also associated with poor oral health, which is known to correlate with the rate of cognitive decline. Here, we will review the evidence for the interplay between mastication and environmental enrichment and assess the impact of each on the structure of the brain. In previous studies, we explored the relationship between behavior and the morphological features of dentate gyrus glial fibrillary acidic protein (GFAP)-positive astrocytes during aging in contrasting environments and in the context of induced masticatory dysfunction. Hierarchical cluster and discriminant analysis of GFAP-positive astrocytes from the dentate gyrus molecular layer revealed that the proportion of AST1 (astrocyte arbors with greater complexity phenotype) and AST2 (lower complexity) are differentially affected by environment, aging and masticatory dysfunction, but the relationship is not straightforward. Here we re-evaluated our previous reconstructions by comparing dorsal and ventral astrocyte morphologies in the dentate gyrus, and we found that morphological complexity was the variable that contributed most to cluster formation across the experimental groups. In general, reducing masticatory activity increases astrocyte morphological complexity, and the effect is most marked in the ventral dentate gyrus, whereas the effect of environment was more marked in the dorsal dentate gyrus. All morphotypes retained their basic structural organization in intact tissue, suggesting that they are subtypes with a non-proliferative astrocyte profile. In summary, the increased complexity of astrocytes in situations where neuronal loss and behavioral deficits are present is counterintuitive, but highlights the need to better understand the role of the astrocyte in these conditions.     

Are Phosphatidylcholine and Lysophosphatidylcholine Body Levels Potentially Reliable Biomarkers in Obesity? A Review of Human Studies

Phosphatidylcholines (PCs) are the major components of biological membranes in animals and are a class of phospholipids that incorporate choline as a headgroup. Lysophosphatidylcholines (LPCs) are a class of lipid biomolecules derived from the cleavage of PCs, and are the main components of oxidized low-density lipoproteins (oxLDLs) that are involved in the pathogenesis of atherosclerosis. Since obesity is associated with a state of chronic low-grade inflammation, one can anticipate that the lipidomic profile changes in this context and both PCs and LPCs are gaining attention as hypothetically reliable biomarkers of obesity. Thus, a literature search is performed on PubMed, Latin American and Caribbean Health Science Literature (LILACS), and Excerpta Medica DataBASE (Embase) to obtain the findings of population studies to clarify this hypothesis. The search strategy resulted in a total of 2403 reports and 21 studies were included according to the eligibility criteria. Controversial data on the associations of PCs and LPCs with body mass index (BMI) and body fat parameters have been identified. There is an inverse relationship between BMI and most species of PCs, and a majority of studies exhibited negative associations between BMI and LPCs. Other findings regarding the differences between PCs and LPCs in obesity are presented, and the associated uncertainties are discussed in detail.     

Effect of structural characteristics of modified waxy corn starches on rheological properties,film‐forming solutions,and on water vapor permeability,solubility, and opacity of films

Waxy corn starch (amylopectin) and three of its chemical derivatives: acetylated cross‐linked (ACLS), oxidized (OS), and octenyl‐succinylated (OSA), were used together with additives such as Tween 80, sorbitol, and beeswax suspension or safflower oil to test their effect on film‐forming solutions (FFS) and films. The objectives of this study were the starch structure characterization, and its correlation with rheological properties of FFS and solubility, opacity, and water vapor permeability (WVP) of the produced films. Analysis of starch structure, rheological characterization, and films micrographs revealed that the starches contained predominantly low MW amylopectin molecules and film properties depended on their ability to reorganize. Additionally, the interaction among groups introduced in modified starches or with additive molecules can hinder or promote starch reorganization, resulting in films with increased or reduced WVP, solubility and transparency properties. Films were obtained by casting and showed a thickness less than 41 µm. Films prepared with OS and beeswax exhibited the best reorganizing capacity of FFS, resulting in less soluble (30.0 ± 1.6%), highly transparent (23.2 ± 3.3 UA × nm) and less permeable films (0.485 ± 0.016 g · mm · m⁻² · h⁻¹ · kPa⁻¹). On the other hand, ACLS showed an opposite trend which was attributed to a more open film structure. These results contribute to understand the molecular interactions of waxy starch molecules in FFS which may be useful to design tailored coatings.     

Processability and mechanical properties of ternary composites PP/EPDM/GF

The enhancement of the mechanical properties of neat PP is achieved by the addition of glass fibers and EPDM rubber. The Young's modulus and notched Charpy impact strength of the composites obtained are improved with respect to the original polymer, leading to a new composite material with a very good balance of toughness and rigidity properties. The tensile behavior of these multiphase systems is successfully compared with theoretical predictions using the Halpin‐Tsai/Nielsen theory for uniaxially short fiber composites, which considers the matrix as a blend with spherical particles and can predict the tensile modulus considering an average fiber orientation angle. An accurate morphological study performed by scanning electron microscopy (SEM) shows a very good dispersion of the rubbery phase into the neat matrix. No special affinity between the rubber and the fibers is reported. The good dispersion and the small particle diameter indicate the good processability of the ternary systems studied.     

Synthesis and properties of alkali-activated iron ore tailings blended with metakaolin

In this study, synthesis, microstructural characteristics, mechanical properties, and environmental compatibility of alkali-activated binders derived from iron ore tailings (IOT)—with partial replacement with metakaolin (MK)—were investigated. The binders were produced with a NaOH solution, IOT, and MK. A thermal cure at 100°C was used and the MK was applied as a partial replacement of IOT in three proportions (10, 20, and 30 wt%). The IOT-based specimens presented an average of 98.0 and 18.0 MPa at 7 days age of curing for compressive and flexural strength, respectively. The mechanical properties of the alkali-activated binders with MK decreased as the substitution ratio increased. By the microstructural analysis, it was found a zeolite-type phase in alkali-activated IOT, while in the binders blended with MK, three new mineral phases were identified. Furthermore, Fourier transform infrared, quantitative X-ray diffraction, and environmental analysis suggest that the Fe species present in IOT acted in the alkali-activation reaction.     

Twisted Crystalline Organic Semiconductor Photodetectors

Optoelectronic properties of anisotropic crystals vary with direction requiring that the orientation of molecular organic semiconductor crystals is controlled in optoelectronic device active layers to achieve optimal performance. Here, a generalizable strategy to introduce periodic variations in the out-of-plane orientations of 5,11-bis(triisopropylsilylethynyl)anthradithiophene (TIPS ADT) crystals is presented. TIPS ADT crystallized from the melt in the presence of 16 wt.% polyethylene (PE) forms banded spherulites of crystalline fibrils that twist in concert about the radial growth direction. These spherulites exhibit band-dependent light absorption, photoluminescence, and Raman scattering depending on the local orientation of crystals. Mueller matrix imaging reveals strong circular extinction (CE), with TIPS ADT banded spherulites exhibiting domains of positive or negative CE signal depending on the crystal twisting sense. Furthermore, orientation-dependent enhancement in charge injection and extraction in films of twisted TIPS ADT crystals compared to films of straight crystals is visualized in local conductive atomic force microscopy maps. This enhancement leads to 3.3- and 6.2-times larger photocurrents and external quantum efficiencies, respectively, in photodetectors comprising twisted crystals than those comprising straight crystals.