Integrated modelling under uncertainty in watershed-level assessment and management.

Uncertainty in water quality model predictions is inevitably high due to natural stochasticity, model uncertainty, and parameter uncertainty. An integrated modelling system (modified-BASINS) under uncertainty is described and demonstrated for use in receiving-water quality prediction and watershed management. A Monte Carlo simulation was used to investigate the effect of various uncertainty types on output prediction. Without pollution control measures in the watershed, the concentrations of total nitrogen (T-N) and total phosphorus (T-P) in the Hwaong Reservoir, considering three uncertainty types, would be less than about 4.4 and 0.23 mg L(-1), respectively, in 2012, with 90% confidence. The effects of two watershed management practices, wastewater treatment plants (WWTP) and constructed wetlands (WETLAND), were evaluated. The combined scenario (WWTP + WETLAND) was the most effective at improving reservoir water quality, bringing concentrations of T-N and T-P in the Hwaong Reservoir to less than 3.4 and 0.14 mg L(-1), 24 and 41% improvements, respectively, with 90% confidence. Overall, the Monte Carlo simulation in the integrated modelling system was practical for estimating uncertainty and reliable in water quality prediction. The approach described here may allow decisions to be made based on the probability and level of risk, and its application is recommended.     

Characterisation and biological treatment of greywater.

Characterisation of greywater was conducted in two different greywater streams in the Netherlands (Groningen and Sneek). The concentrations of macropollutants and nutrients measured were very different in both streams; in particular the COD was 425 mg/L in Groningen's water whereas in Sneek it was 1,583 mg/L. The aerobic treatment of greywater in a fed-batch reactor led to a 90% removal of COD at different organic loading rates. Anaerobically, the removal reached 40% COD removal on average, the possible reason being the high amount of surfactants present in the influent.     

N-phenyl piprazine-polyester derivative as curing activator of unsaturated resins

An oligomeric compound (Pol-2A) has been synthesized by a Michael-type addition of N-phenyl piperazine to double bonds of the maleic units of a polyester resin. This compound was used as activator (with benzoyl peroxide) in the curing of unsaturated polyester resins and compared in its efficiency with N,N-dimethylaniline (DMA). Pol-2A showed actiator characteristics comparable to those of DMA, with a wider range of gel times, and similar mechanical properties of the end products, with the advantage of a severe lowering of diffusibility and related environmental toxicity.     

Sociology of Design and EDA

Walden C. Rhines, CEO and chairman of the board of Mentor Graphics, delivered this keynote address at the Design, Automation, and Test in Europe Conference and Exhibition (DATE 06).     

Equilibrium distribution of water in the two-phase system supercritical carbon dioxide–textile

When natural fibres are dyed in supercritical carbon dioxide, the addition of a small amount of water increases coloration. For a process design it is important to know how much water has to be added to obtain a desired humidity of both textile and carbon dioxide. In this work a thermodynamic model is proposed to calculate the distribution of water over the textile phase and the supercritical phase as a function of pressure and temperature. The phase equilibrium is described with Raoult's law for non-ideal fluids. The absorbed water in the textile is a condensed phase and is modelled here as a non-ideal liquid, using the NRTL-equation. The non-ideality of the supercritical phase is described by a solubility enhancement factor, a new equation derived from statistical thermodynamics. Although the model is applied to cotton, viscose, silk and wool, it can be used for all water absorbing textiles.     

A Novel Band-Reject Element for Pseudoelliptic Bandstop Filters

A novel band-reject element for the design of inline waveguide pseudoelliptic band-reject filters is introduced. The element consists of an offset partial-height post in a rectangular waveguide in which the dominant TE₁₀ mode is propagating. The location of the attenuation pole is primarily determined by the height of the post that generates it. The element allows the implementation of weak, as well as strong coupling coefficients that are encountered in asymmetric band-reject responses with broad stopbands. The coupling strength is controlled by the offset of the post with respect to the center of the main waveguide. The posts are separated by uniform sections of the main waveguide. An equivalent low-pass circuit based on the extracted pole technique is first used in a preliminary design. An improved equivalent low-pass circuit that includes a more accurate equivalent circuit of the band-reject element is then introduced. A synthesis method of the enhanced network is also presented. Filters based on the introduced element are designed, fabricated, and tested. Good agreement between measured and simulated results is achieved     

Analog and Digital Speed Control of DC Drives Using Proportional-Integral and Integral-Proportional Control Techniques

A comparative study of proportional-integral (P-I) and integral-proportional (I-P) control schemes, for the speed control of a dc drive, using both analog-and microprocessor-based digital circuits, is presented. The often-neglected current response is discussed and results are presented. The speed response to step changes in speed reference and load torque, using both the control schemes, is compared to evaluate the merits of I-P control. A brief discussion of sensitivity to controller gains is also given. It is shown that the I-P control scheme offers some distinctive advantages over P-I control. Experimental and simulation results are also presented.     

A sensitivity analysis of the linear complementarity programming model: Appalachian steam coal and the natural gas market

There have been extensive attempts in recent years to perform spatial equilibrium analysis of commodity markets, particularly that of energy. Most of these attempts have been based on linear programming transportation models, and more recently quadratic programming models. Unfortunately, neither of these modelling approaches can deal with the case of multi-commodity analysis with non-symmetric regression coefficients. In this paper, we overcome this problem by employing the linear complementarity programming model. In addition, we show how the model can be applied to coal and gas energy flows within a single region. Future potential applications of the model are also implied.     

Heat exchanger: Optimal separation for vertical rectangular fins protruding from a vertical rectangular base

An experimental investigation of the steady-state rates of heat transfer from an array of vertical rectangular 3 mm thick fins, extending 60 mm perpendicularly out of a 250 mm high vertical rectangular base, is reported. For base temperatures between room temperature (～ 15°C) and 100°C, the optimal separation of the parallel fins, corresponding to the maximum rate of heat loss, is 10 ± 1 mm.     

Forecasting Canadian nuclear power station construction costs

Because of the huge volume of capital required to construct a modern electric power generating station, investment decisions have to be made with as complete an understanding of the consequences of the decision as possible. This understanding must be provided by the evaluation of future situations. A key consideration in an evaluation is the financial component. This paper attempts to use an econometric method to forecast the construction costs escalation of a standard Canadian nuclear generating station (NGS). A brief review of the history of Canadian nuclear electric power is provided. The major components of the construction costs of a Canadian NGS are studied and summarized. A database is built and indexes are prepared. Based on these indexes, an econometric forecasting model is constructed using an apparently new econometric methodology of forecasting modelling. Forecasts for a period of 40 years are generated and applications (such as alternative scenario forecasts and range forecasts) to uncertainty assessment and/or decision-making are demonstrated. The indexes, the model, and the forecasts and their applications, to the best of the author's knowledge, are the first for Canadian NGS constructions.