功率电子器件用AlN陶瓷基板的研制

阐述了AlN陶瓷的烧结原理 ,分析了烧结工艺参数对大面积AlN基板性能的影响 ,成功研制出了高热导率(190W /m·K)、大面积 (14 0mm× 90mm)、翘曲度为 2 0 μm/5 0mm的AlN陶瓷基板。     

纳米碳酸钙制备过程中添加剂作用机理探讨

采用鼓泡碳化法 ,在最佳反应温度、反应物浓度的条件下 ,考察了添加剂对产物形状及粒径大小的影响 ,得到了直径为 2 0～ 30nm、长径比在 2 0左右且分散性能良好的针状纳米碳酸钙 ,并对添加剂作用机理进行了分析。     

高架桥梁上部结构整体降低施工中的抗风险对策

在高架道路、桥梁改建中,往往遇到需调整桥面标高的情况。以上海市南北高架与内环线高架相连的鲁班路立交SE匝道为例,介绍利用旧桥承台基础,在其上搭设支架和液压系统,然后解除立柱的垂直约束和水平约束,将桥梁上部结构整体分步降低到设计标高。重点介绍针对施工中安全风险点,采取的支撑体系、液压体系、降低顺序原则、上部结构牵拉系统、监测系统等具体措施。     

研究生生态型学术文化建设的探讨

本文立足学术文化研究的现状和意义,引入生态学相关理论构建了生态型学术文化模型,并在此基础上建立了相应的评价体系,针对研究生生态型学术文化作了综合评价,从而导出其“五维一体、协调发展”的优化模式。     

Quantitative analysis of Ni effect on CCT diagrams of novel air-cooled bainite steels using artificial neural network models

The quantitative effect of Ni content on continuous cooling transformation （CCT） diagrams of novel air-cooled bainite steels was analyzed using artificial neural network models. The results showed that Ni may retard the high- and medium-temperature transformation and martensite transformation. The results conform to the materials science theories.     

濮城油田濮67块低渗凝析难动用气藏挖潜技术研究

濮67块具有埋藏深、物性条件差、储量难动用程度低等特点，目前气藏采出程度很低，开发效果差。通过对濮67块天然气储量再认识，落实了该块储量；通过对濮67块各砂组剩余天然气分布规律的研究，明确了剩余气的下步挖潜方向；并开展了配套的剩余天然气挖潜技术研究，通过在生产中应用，取得了较好的增产效果，提高了气藏的采收率。     

金属拉伸过程中的拉伸应力及影响因素

电线电缆、线圈绕组线及灯泡的钨丝等都是经过金属拉伸制成的。许多触点导电材料，如开关上的银镍合金触点、电路板上的微细铝硅丝接点线(直径0．01毫米以下)也是金属拉伸制品。研究金属拉伸过程中的拉伸应力及影响因素，是保证拉伸过程顺利进行及成品质量的关键。     

Highly Efficient Orange and Green Solid‐State Light‐Emitting Electrochemical Cells Based on Cationic IrIII Complexes with Enhanced Steric Hindrance

Highly efficient orange and green emission from single‐layered solid‐state light‐emitting electrochemical cells based on cationic transition‐metal complexes [Ir(ppy)₂sb]PF₆ and [Ir(dFppy)₂sb]PF₆ (where ppy is 2‐phenylpyridine, dFppy is 2‐(2,4‐difluorophenyl)pyridine, and sb is 4,5‐diaza‐9,9′‐spirobifluorene) is reported. Photoluminescence measurements show highly retained quantum yields for [Ir(ppy)₂sb]PF₆ and [Ir(dFppy)₂ sb]PF₆ in neat films (compared with quantum yields of these complexes dispersed in m‐bis(N‐carbazolyl)benzene films). The spiroconfigured sb ligands effectively enhance the steric hindrance of the complexes and reduce the self‐quenching effect. The devices that use single‐layered neat films of [Ir(ppy)₂sb]PF₆ and [Ir(dFppy)₂sb]PF₆ achieve high peak external quantum efficiencies and power efficiencies of 7.1 % and 22.6 lm W^–1) at 2.5 V, and 7.1 % and 26.2 lm W^–1 at 2.8 V, respectively. These efficiencies are among the highest reported for solid‐state light‐emitting electrochemical cells, and indicate that cationic transition‐metal complexes containing ligands with good steric hindrance are excellent candidates for highly efficient solid‐state electrochemical cells.     

Structure and properties of CE/CTBN/EP blends: II. Effect of EP on the mechanical properties and thermostability of the CE/CTBN system

Carboxyl‐terminated butadiene‐acrylonitrile rubber (CTBN) has often been used to improve the toughness of cyanate ester (CE) resin while sacrificing modulus and thermostability. In this paper, the addition of the appropriate amount of epoxy resin (EP) to the CE/CTBN system is shown to not only increase the modulus and thermostability of the blend, but also improve the toughness. The values of impact strength showed a maximum for the CE/CTBN/EP 100/5/5 blend. The temperature of 10 % weight loss (T₁₀) improves from 376 °C for CE/CTBN 100/5 to 407 °C for the CE/CTBN/EP 100/5/2.5 blend. It is proposed that addition of the appropriate amount of EP can decrease the mobility and increase the stability of CTBN via the reaction between the terminal carboxyl group of CTBN and the hydroxyl group of EP. But a very high EP concentration will decrease the crosslinking density of CE, consequently reducing the mechanical properties and thermostability of the blends. Copyright © 2004 Society of Chemical Industry