Electrophilic Aromatic Functionalization of Phenolic Photoresist Polymers

Summary Functionalization of both linear poly(4-hydroxystyrene) (PHS) and branched poly(4-hydroxystyrene) (PHS-B) was accomplished via a Reimer-Tiemann electrophilic aromatic substitution reaction. Linear and branched poly(4-hydroxystyrene-co-5-vinylsalicylaldehyde) (pHS/5VSA and pHS-B/5VSA) copolymers were observed to undergo acid-catalyzed, novolac type self-crosslinking. Both the pHS/5VSA and pHS-B/5VSA copolymer systems possessed a lower deep ultra violet microlithographic sensitivity compared to linear PHS when formulated in negative photoresists. The sluggishness of the negative photoresists containing 5-vinylsalicylaldehyde functionalized copolymers was attributed to a combination of resonance stabilization and steric hindrance effects.     

Preliminary report on the nutritional significance of bound gossypol in cottonseed meal

Summary A procedure is described by which bound or inactivated gossypol can be removed from cottonseed meal without the application of heat which might damage the protein. The removal of bound gossypol increased the nutritional value of the protein as determined by chick feeding tests, rat protein-repletion tests, and lysine availability tests. A procedure is described for the preparation of a gossypol-cottonseed protein complex without heating the materials. As a result of the combination of the protein with gossypol, marked reduction in nutritional value occurred. The nitrogen solubility of the complex was only about half that of the original protein. The results are in accord with the concept that the inactivation of gossypol during the processing of cottonseed meal is accomplished through the formation of an insoluble, inert gossypol-protein complex which results not only in rendering the gossypol harmless but also in the loss of part of the nutritional value of the protein.     

Effects of acid leaching treatment of soda-lime silicate glass on crack initiation and fracture

Water or acid soaking surface treatments have been shown to increase the mechanical strength of soda-lime silicate (SLS) glasses. This increase in strength has traditionally been attributed to effects related to residual stress or changes in fracture resistance. In this work, we report experimental data that cannot be explained based on the existing knowledge of glass surface mechanics. In dry environments, annealed and acid-leached SLS surfaces have comparable crack initiation stress and fracture stress as measured by Hertzian indentation and biaxial bending tests, respectively. Yet, in the presence of humidity, acid-leached surfaces have higher failure stress than the annealed surfaces. This apparent enhancement in the crack resistance of the acid-leached surface of SLS glass in humid environments supports the hypothesis that acid-leached surface chemistry can lower the transport kinetics of molecular water to critical flaws.     

Aromatic bisphenol A-based elastomers via hydrosilylation chemistry

The preparation of highly aromatic elastomers from a bisphenol A-based divinyl-terminated resin and polymerization with various aromatic silane containing compounds utilizing a room temperature hydrosilylation reaction is demonstrated. The polymers exhibit high thermal and oxidative stability with 5% weight losses around 430 and 350°C and char yields ranging from 35% to 40%. The thermosets maintained their elastomeric properties with good hardness and mechanical properties as measured by elongation measurements. The toughness of the thermosets was not improved with the inclusion of aromatic moieties but the hardness did appear to increase with the addition of more aromatic groups.     

Use of scanning probe microscopy to study the evolution of nanometer sized liquid structures

The evolution of the profile of nanometer sized water drops on a mica surface has been studied through hydration scanning probe microscopy. A time range from a few seconds down to a fraction of millisecond after the formation of the drop has been explored. This high time resolution has been obtained by sampling a series of statistically equivalent drops. This approach also avoids any probe interference during the drop evolution process.     

Application of the Soil and Water Assessment Tool for six watersheds of Lake Erie: Model parameterization and calibration

The Soil and Water Assessment Tool (SWAT), a physically-based watershed-scale model, holds promise as a means to predict tributary sediment and nutrient loads to the Laurentian Great Lakes. In the present study, model performance is compared across six watersheds draining into Lake Erie to determine the applicability of SWAT to watersheds of differing characteristics. After initial model parameterization, the Huron, Raisin, Maumee, Sandusky, Cuyahoga, and Grand SWAT models were calibrated (1998-2001) and confirmed, or validated (2002-2005), individually for stream water discharge, sediment loads, and nutrient loads (total P, soluble reactive P, total N, and nitrate) based on available datasets. SWAT effectively predicted hydrology and sediments across a range of watershed characteristics. SWAT estimation of nutrient loads was weaker although still satisfactory at least two-thirds of the time across all nutrient parameters and watersheds. SWAT model performance was most satisfactory in agricultural and forested watersheds, and was less so in urbanized settings. Model performance was influenced by the availability of observational data with high sampling frequency and long duration for calibration and confirmation evaluation. In some instances, it appeared that parameter adjustments that improved calibration of hydrology negatively affected subsequent sediment and nutrient calibration, suggesting trade-offs in calibrating for hydrologic vs. water quality model performance. Despite these considerations, SWAT accurately predicted average stream discharge, sediment loads, and nutrient loads for the Raisin, Maumee, Sandusky, and Grand watersheds such that future use of these SWAT models for various scenario testing is reasonable and warranted.     

METIS-II: low resource machine translation

METIS-II was an EU-FET MT project running from October 2004 to September 2007, which aimed at translating free text input without resorting to parallel corpora. The idea was to use “basic” linguistic tools and representations and to link them with patterns and statistics from the monolingual target-language corpus. The METIS-II project has four partners, translating from their “home” languages Greek, Dutch, German, and Spanish into English. The paper outlines the basic ideas of the project, their implementation, the resources used, and the results obtained. It also gives examples of how METIS-II has continued beyond its lifetime and the original scope of the project. On the basis of the results and experiences obtained, we believe that the approach is promising and offers the potential for development in various directions.     

Modelling and condition-based control of a flexible and hybrid disassembly system with manual and autonomous workstations using reinforcement learning

Journal of Intelligent Manufacturing - Remanufacturing includes disassembly and reassembly of used products to save natural resources and reduce emissions. While assembly is widely understood in...     

Noninvasive pacing: what you should know

Noninvasive pacing is a valuable therapy in emergency cardiac care. The more experience clinicians have with the noninvasive pacing procedure, the greater their confidence and the easier the job becomes. Effective troubleshooting during pacing becomes less problematic with increased experience with the therapy. Noninvasive pacing allows rapid initiation of emergency pacing and "buys time" to stabilize the patient and plan further care.     

Functional correction of renal defects in a mouse model for ARPKD through expression of the cloned wild-type Tg737 cDNA

Autosomal recessive polycystic kidney disease (ARPKD) is characterized by the formation of large collecting tubule and ductular cysts that often result in renal insufficiency within the first decade of life. Understanding the process leading to cyst formation will require the identification and characterization of genes involved in the etiology of this disease. In this regard, we previously described the generation of a mouse model (TgN737Rpw) for ARPKD and the cloning of a candidate gene. Here we show direct involvement of the Tg737 gene in collecting duct cyst formation by expressing the wild-type Tg737 cDNA as a transgene in TgN737Rpw mutants. In contrast to TgN737Rpw mutants, the "rescued" animals survive longer, have normal renal function and normal localization of the EGFr to the basolateral surfaces of collecting duct epithelium.