Plasma-enabled healing of graphene nano-platelets layer

Graphene platelet networks (GPNs) were deposited onto silicon substrates by means of anodic arc discharge ignited between two graphite electrodes.Substrate temperature and pressure of helium atmosphere were optimized for the production of the carbon nanomaterials.The samples were modified or destroyed with different methods to mimic typical environments responsible of severe surface degradation.The emulated conditions were performed by four surface treatments,namely thermal oxidation,substrate overheating,exposition to glow discharge,and metal coating due to arc plasma.In the next step,the samples were regenerated on the same substrates with identical deposition technique.Damaging and re-growth of GPN samples were systematically characterized by scanning electron microscopy and Raman spectroscopy.The full regeneration of the structural and morphological properties of the samples has proven that this healing method by arc plasma is adequate for restoring the functionality of2D nanostructures exposed to harsh environments.     

Kinetics of the liquid phase dehydration of 1‐octanol to di‐n‐octyl ether on Amberlyst 70

The kinetics of the liquid phase dehydration of 1‐octanol to di‐n‐octyl ether (DNOE) over Amberlyst 70 was studied at 413–453 K. Mechanistic rate models assuming water and 1‐octanol adsorbed on the resin, and the free sites fraction negligible, were selected from 1‐octanol dehydration experiments. Next, the influence of DNOE, water, and 1,4‐dioxane (solvent) concentration was evaluated. DNOE and 1,4‐dioxane do not affect significantly the reaction rate, while water inhibits it strongly. Water effect was quantified by splitting the rate constant into a “true one” and a correction factor related to the fraction of active sites blocked by water. The best kinetic model stemmed from an Eley‐Rideal mechanism with water adsorbed onto the resin and DNOE released directly to the liquid phase, with a correction factor for water inhibitory effect based on a Freundlich isotherm‐like function; activation energy being 110 ± 5 kJ·mol^?1, in line with literature data on homologous reactions. © 2017 American Institute of Chemical Engineers AIChE J, 63: 3966–3978, 2017     

An iron-based T 1 contrast agent made of iron-phosphate complexes: In vitro and in vivo studies

A new iron-based T ₁ contrast agent consisting of a complex of iron ions coordinated to phosphate and amine ligands (Fe_(phos) in short) has been characterized by spectroscopic and magnetic measurements. NMR relaxation studies showed r ₁ values to be dependent on the phosphate salt concentration, K₂HPO₄, present in the medium. r ₁ reaches a maximum value of 2.5 mM^?1 s^?1 for measurements carried out at 7 T and 298 K. ³¹P MRS, Mössbauer spectroscopy and magnetic measurements of Fe_(phos) solutions suggest paramagnetic Fe³⁺ ions present in the studied iron–phosphate complex. In vitro and in vivo toxicity experiments with C6 cells and CD1 mice, respectively, demonstrated lack of toxicity for Fe_(phos) at the highest dose tested in the MRI experiments (12 mM iron for C6 cells and 0.32 mmol iron/kg for mice). Finally, T ₁ weighted images of brain tumours in mice have shown positive contrast enhancement of Fe_(phos) for tumour afflicted regions in the brain.     

Sound influence on landscape values

In order to study the influence of the interaction between visual and acoustic stimuli on perception of the environment, 36 sound and image combinations were presented to 75 subjects. The sounds and images used were of natural and semi-natural settings and urban green space. Affective response was measured in terms of pleasure. The results show a rank of preferences running from natural to man-made sounds, with the nuance of a potential alert or alarm-raising component of the sound. The potential for alert or alarm-raising may be related, over and above the information content or meaning, to the characteristics of the sound frequency spectrum, specifically to the existence of frequency bands whose sound levels impose themselves on the acoustic background. The congruence or coherence between sound and image influences preferences. Coherent combinations are rated higher than the mean of the component stimuli. Results suggest that there is a need to identify places or settings where the conservation of the sound environment is essential, because of its salient informational content or due to the drastic impact of the loss of sound quality on observer appreciation, for example, in urban green spaces, natural spaces and cultural landscapes.     

Lipase‐catalysed synthesis of natural ethanol esters: effect of water removal on enzyme reutilisation

Lipase‐catalysed synthesis of ethanol esters using natural substrates is presented. Initial substrate concentrations, optimised through an experimental design, were 0.8 mol dm⁻³ lauric acid and 0.58 mol dm⁻³ ethanol, with an initial esterification rate (r₀) of 17.13 mmol dm⁻³ min⁻¹. Two different water removal systems were compared: a cooling exchanger in the reactor headspace and a vacuum‐based system. The best results were obtained with the second system. After six consecutive operations with the same enzyme, no loss of activity was observed. The yields obtained in all the runs were greater than 90%. Using the same approach three different natural esters (ethyl laureate, ethyl myristate and ethyl palmitate) were synthesised at 0.9 dm³ scale. Similar results were obtained in all three cases, with chemical yields always being greater than 90%. © 2000 Society of Chemical Industry     

Distributed parameter model simulation tool for PEM fuel cells

In this work, a simulation tool for proton exchange membrane fuel cells (PEMFC) has been developed, based on a distributed parameter model. The tool is designed to perform studies of time and space variations in the direction of the gas channels. Results for steady-state and dynamic simulations for a single cell of one channel are presented and analyzed. Considered variables are concentrations of reactants, pressures, temperatures, humidification, membrane water content, current density, among others that have significant effects on the performance and durability of PEMFC.     

Cheaper membrane materials for microalgae dewatering

Among different strategies to reduce costs in microalgae dewatering process via cross-flow filtration, the one related to membrane material was investigated in order to be decreased. Several materials were tested, starting with the ones commonly used in membrane technology [ceramic, polysulfone (PSf) and polyacrylonitrile (PAN)] to the ones generally employed in packaging industry [acrylonitrile butadiene styrene (ABS), glycol-modified polyethylene terephthalate (PETG) and polylactic acid (PLA)], the latter being considerably cheaper. Experiments carried out showed promising results in terms of permeabilities for PSf–Pluronic^® F127 blended membranes and PAN membranes (11 ± 1 L/h/m²/bar and 22 ± 1 L/h/m²/bar, respectively, instead of 2 ± 2 L/h/m²/bar of PSf membranes), but with high related costs. PLA membranes showed good mechanical properties, biodegradability and price, but low permeability values (5 ± 1 L/h/m²/bar). PETG membranes showed attractive results in terms of costs and permeability, but poor mechanical properties. The polymer that offered the best results was the ABS that reached membrane permeabilities of 19 ± 1 L/h/m²/bar, maintaining good mechanical properties while filtering the microalgae Phaeodactylum tricornutum Bohlin. Thus, a novel functionality was found for these not so common polymers in microalgae dewatering. This indicates that use of these materials could also be considered in other aqueous micro/ultrafiltration applications. In addition, the biodegradable PLA polymer introduces a new concept of cheap and environmental friendly membrane in this application.