Degradation of a textile azo dye by pulsed arc discharge to the surface of wastewater

The pulsed arc discharge to the surface of wastewater was applied to the degradation of a textile azo dye (Acid Red 27). A high-voltage electrode (discharging electrode) was vertically placed above the surface of the wastewater while the wastewater itself was grounded. The pulsed arc discharge occurred between the tip of the discharging electrode and the surface of the wastewater, producing various oxidative species. Oxygen was used as the working gas instead of air to prevent nitrogen oxides from forming. The effect of several parameters on the chromaticity and chemical oxygen demand (COD) removal was examined. The results obtained showed that the chromaticity of the wastewater was completely removed by this process and the COD also decreased significantly. It has been found that ozone formed in the gas phase mainly affects the removal of the dye. The contribution of other effects such as ultraviolet light emission and OH radical formation during the arc discharge to the degradation of the dye was found to be less than 15%. For the present reactor system, the optimum pH, pulse repetition rate and agitation speed were found to be 3.0, 110 Hz and 300 rpm, respectively.     

Effects of large mammalian herbivores and ant symbionts on condensed tannins of Acacia drepanolobium in Kenya

Condensed tannins have been considered to be important inducible defenses against mammalian herbivory. We tested for differences in condensed tannin defenses in Acacia drepanolobium in Kenya over two years among different large mammalian herbivore treatments [total exclusion, antelope only, and megaherbivore (elephants and giraffes) + antelope] and with four different ant symbiont species on the trees. We predicted that (1) condensed tannin concentrations would be lowest in the mammal treatment with the lowest level of herbivory (total exclusion), (2) trees occupied by mutualist ants that protect the trees most aggressively would have lower levels of tannins, and (3) if chemical defense production is costly, there would be a trade-off between tannin concentrations, growth, and mechanical defenses. Mean tannin concentrations increased from total exclusion treatments to wildlife-only treatments to megaherbivore + antelope treatments. In 1997, condensed tannin concentrations were significantly lower in trees occupied by the ant Crematogaster nigriceps, the only ant species that actively removed axillary buds. Contrary to our prediction, trees occupied by ant species that protect the trees more aggressively against mammalian herbivores did not have lower overall levels of condensed tannins. There was no consistent evidence of a trade-off between tannin concentrations and growth rate, but there was a positive correlation between mean thorn length and mean tannin concentrations across species of ant inhabitants and across herbivore treatments in 1997. Contrary to our expectation, trees had higher tannin concentrations in the upper parts of the canopy where there is little herbivory by mammals.     

Crop residue,manure and fertilizer in dryland maize under reduced tillage in northern China: I grain yields and nutrient use efficiencies

The rapidly increasing population and associated quest for food and feed in China has led to increased soil cultivation and nitrogen (N) fertilizer use, and as a consequence to increased wind erosion and unbalanced crop nutrition. In the study presented here, we explored the long-term effects of various combinations of maize stover, cattle manure and nitrogen (N) and phosphorus (P) fertilizer applications on maize (Zea mays L.) yield and nutrient and water use efficiencies under reduced tillage practices. In a companion paper, we present the effects on nutrient balances and soil fertility characteristics. The ongoing factorial field trial was conducted at Shouyang Dryland Farming Experimental Station in northern China from 1993 onwards. The incomplete, determinant-optimal design comprised 12 treatments, including a control treatment, in duplicate. Grain yields and N, P, and potassium (K) uptakes and N, P and K use efficiencies were greatly influenced by the amount of rain during the growing season (GSR), and by soil water at sowing (SWS). There were highly significant interactions between GSR and added stover and manure, expressed in complex annual variations in grain yield and N, P and K use efficiencies. Annual mean grain yields ranged from 3,000 kg ha⁻¹ to 10,000 kg ha⁻¹ and treatment mean yields from 4,500 kg ha⁻¹ to 7,000 kg ha⁻¹. Balanced combination of stover (3,000–6,000 kg), manure (1,500–6,000 kg) and N fertilizer (105 kg) gave the highest yield. Stover and manure were important for supplying K, but the effects differed greatly between years. Overall mean N recovery efficiency (NRE) ranged from 28% to 54%, depending on N source. NRE in wet years ranged from 50% to 90%. In conclusion, balanced combinations of stover, manure and NP fertilizer gave the highest yield and NRE. Reduced tillage with adding stover and manure in autumn prior to ploughing is effective in minimizing labor requirement and wind erosion. The potentials of split applications of N fertilizer, targeted to the need of the growing crop (response farming), should be explored to further increase the N use efficiency.     

Purification of 2-mercaptobenzothiazole by solvent extraction

−Purification of 2-mercaptobenzothiazole (91.9% purity) by solvent extraction was studied. The extraction of impurities present in crude 2-MBT (e.g. benzothiazole, sulfides and sulfur containing compounds) was carried out at temperatures between 70-180°C using various solvents and their mixtures of different polarity. The highest purity of 2-MBT, above 99% was obtained using nitrobenzene, toluene and ethanol, even at a concentration of 2-MBT above 50 wt%. Increasing temperature and decreasing concentration of the raw material have a positive influence on the purification process. A comparable efficiency of purification was observed also with mixed solvents, (toluene with ethanol, acetone and aniline) possessing the same polarities. A correlation between the polarity indexes (PI) of mixed solvents and experimentally obtained purity of 2-MBT was found. The highest purity of 2-MBT provides extraction of the raw material with mixed solvents having PI 3.8-4.4.     

Synthesis and properties of chitosan-modified poly(vinyl butyrate)

Modification of chitosan by grafting of vinyl butyrate was carried out in homogeneous phase using potassium persulfate as redox initator and 1.5% acetic acid as solvent. The percent grafting and grafting efficiency were analysed and the high grafting efficiency up to 94% was observed. The effects of reaction variables such as monomer concentration, initiator concentration, temperature and reaction time were investigated. It was observed that the solubility of chitosan was markedly reduced after grafting with vinyl butyrate. The grafted product is insoluble in common organic solvents as well in dilute organic and inorganic acids. Characterization of the graft copolymers were carried out by using Fourier Transform Infrared Spectroscopy (FTIR), Differential Scanning Calorimetry (DSC) and Scanning Electron Microscopy (SEM) technics. Characteristic signal of carbonyl group was observed at 1,731 cm⁻¹ which belongs to the poly vinyl butyrate segments in the graft copolymer. The melting transition of the chitosan main chain in the copolymer shifted to 124°C from its original value 101°C. In addition to these, we have also studied topology of the graft copolymer and the SEM micrograph showed continuous homogenous matrix which means there is no phase separation.     

Power Smoothing of a Variable-speed Wind Turbine Generator

This paper presents a power-smoothing scheme of a variable-speed wind turbine generator (VSWTG) that employs separate control gains for the over-frequency section (OFS) and under-frequency section (UFS). In the proposed scheme, an additional proportional control loop based on the system frequency deviation operating in conjunction with maximum power point tracking operation is used. In the OFS, to improve the energy-storing capability, the scheme suggests the gain of the frequency deviation control loop, which is set to be monotonously decreasing with the rotor speed while being significantly larger than that in the UFS. In the UFS, to improve the energy-releasing capability while preventing over-deceleration, the gain of the frequency deviation control loop is set to be a linear function of the rotor speed. The simulation results under continuously varying wind speeds with different wind patterns and wind speeds clearly demonstrate that the proposed scheme significantly mitigates the output power fluctuations of a VSWTG. The proposed scheme keeps the frequency within a narrow range, thereby reducing the required primary frequency control reserve for regulating the frequency under normal operations.

     

Enhancement of the hydrogen storage properties of Mg/C nanocomposites prepared by reactive milling with molybdenum

The effect of Mo on the morphology, crystal structure and hydrogen sorption properties of Mg/C composites prepared by reactive milling was studied. Transmission electron microscopic(TEM) observation shows that Mg/C composites prepared with the addition of Mo are of nanoscale with particle size about 20-120 nm after 3 h of milling under 1 MPaH_2. MgH_2 of tetrahedral crystal structure predominates in the materials with the geometric shape of oblique hexagonal prism. From X-ray diffraction(XRD) and hydrogen content studies, Mo and crystallitic carbon have a synergistic effect on promoting the hydrogenation rate in the reactive milling process. From differential scanning calorimetric(DSC) studies, the dehydrogenation peak temperature of the Mg/C materials with Mo is lowered to 299-340 ℃.     

Reaction mechanism and microstructure evolution of reaction sintered <Emphasis Type="Italic">h</Emphasis>-BN

Hexagonal boron nitride ceramic (h-BN) based on the nitridation of B powders was obtained by reaction sintering method. The effects of sintering temperature on the mechanical properties and microstructure of the resultant products were investigated and the reaction mechanism was discussed. Results showed that the reaction between B and N₂ occurred vigorously at temperatures ranging from 1 000 °C to 1 300 °C, which resulted in the generation of t-BN. When the temperature exceeded 1 450 °C, transformation from t-BN to h-BN began to occur. As the sintering temperature increased, the spherical particles of t-BN gradually transformed into fine sheet particles of h-BN. These particles subsequently displayed a compact arrangement to achieve a more uniform microstructure, thereby increasing the strength.     

Numerical simulation of the multicomponent mass transfer during Bridgman growth of CdZnTe crystal using Maxwell-Stefan diffusion model

To reveal the complicated mechanism of the multicomponent mass transfer during the growth of ternary compound semiconductors, a numerical model based on Maxwell-Stefan equations was developed to simulate the Bridgman growth of CdZnTe crystal. The Maxwell-Stefan diffusion coefficients in the melt were estimated. Distributions of Zn, Cd, and Te were calculated with variable ampoule traveling rate and diffusion coefficients. The experimental results show that Zn in melt near the growth interface decreases and diffuses from the bulk melt to the growth interface. For Cd, the situation is just the opposite. The coupling effects of Zn and Cd diffusions result in an uphill diffusion of Te at the beginning of the growth. Throughout the growth, the concentration of Te in the melt keeps low near the growth interface but high far from the growth interface. Increasing the ampoule traveling rate will aggravate the segregation of Zn and Cd, and hence deteriorate the uniformity of Te. We also find that not only the diffusion coefficients but also the ratios between them have significant influence on the species diffusions.     

Diffusion characteristic of sulfate anion in surface region of cement mortar at early stage

The SO_4~(2-)concentration distributions in surface region of cement mortar immersed in sulfate solution at early stage were measured by layered sampling method combined with chemical analysis, and the diffusion coefficients of SO_4~(2-)anions in surface region of mortar into internal area were calculated by means of instantaneous plane diffusion theory. The experimental results showed that the SO_4~(2-)concentration gradually reduced when the diffusion depth increased in the surface region of mortar. Diffusion coefficient(D) was relevant with the concentration and kind of environmental sulfate solution, which reduced with immersion time at the beginning, and then rose slowly after a period of time. The calculation of initial diffusion coefficient(D_0) and starting time of deterioration(t_∞) caused by sulfate attack was further attempted based on the data of diffusion coefficient, and it was found that D_0 and t∞ were all relevant with concentrations of sulfate and different kind of sulfate as well.