Metrics for shot boundary detection in digital video sequences

The detection of shot boundaries in video sequences is an important task for generating indexed video databases. This paper provides a comprehensive quantitative comparison of the metrics that have been applied to shot boundary detection. In addition, several standardized statistical tests that have not been applied to this problem, as well as three new metrics, are considered. A mathematical framework for quantitatively comparing metrics is supplied. Experimental results based on a video database containing 39,000 frames are included.     

Optimization of shell buckling incorporating Karhunen-Loève-based geometrical imperfections

The optimization of shell buckling is performed considering peak normal force and absorbed internal energy in the presence of geometrical imperfections implemented through Karhunen-Loève expansions. Initially, the mass of a shell is minimized in the presence of random initial imperfections by allowing cutouts in the material, subject to constraints on the average peak force and average internal energy. Then, robustness is considered by minimizing the coefficient of variation of the normal peak force while constraining the average peak force and average internal energy. LS-OPT® is used both to generate an experimental design and to perform a Monte Carlo simulation (96 runs) using LS-DYNA® at each of the experimental design points. The effect of imperfections when minimizing the mass is not large, but when considering robustness, however, the optimal design has a substantially increased hole size and increased shell thickness, resulting in a heavier design with maximal robustness within the constraints.     

Optical information for car following: the driving by visual angle (DVA) model

OBJECTIVE: The present study developed and tested a model of car following by human drivers. BACKGROUND: Previous models of car following are based on 3-D parameters such as lead vehicle speed and distance information, which are not directly available to a driver. In the present paper we present the driving by visual angle (DVA) model, which is based on the visual information (visual angle and rate of change of visual angle) available to the driver. METHOD: Two experiments in a driving simulator examined car-following performance in response to speed variations of a lead vehicle defined by a sum of sine wave oscillations and ramp acceleration functions. In addition, the model was applied to six driving events using real world-driving data. RESULTS: The model provided a good fit to car-following performance in the driving simulation studies as well as in real-world driving performance. A comparison with the advanced interactive microscopic simulator for urban and nonurban networks (AIMSUN) model, which is based on 3-D parameters, suggests that the DVA was more predictive of driver behavior in matching lead vehicle speed and distance headway. CONCLUSION: Car-following behavior can be modeled using only visual information to the driver and can produce performance more predictive of driver performance than models based on 3-D (speed or distance) information. APPLICATION: The DVA model has applications to several traffic safety issues, including automated driving systems and traffic flow models.     

Novel system for coupling to surface-plasmon polaritons

A novel system for coupling to surface-plasmon polaritons has been designed, fabricated, and assembled. Microcomputer controlled electronics provide for accurate and repeatable angular positioning of the waveguide coupler with respect to the incident beam and for precise angular registration of detector output signals. The optical components, combined with a retroreflecting spherical-surface coupling prism, give apertured control of the beam profile at the coupling interface.     

Effect of argon pressure on the optical properties of sputtered solar selective surfaces

The influence of argon gas pressure (0.15-40 Pa) on the refractive indices n,k of dc planar-magnetron reactively sputtered cermet and amorphous semiconductor films has been investigated for a layer thickness of approximately 50 nm. Stainless steel-carbon and amorphous hydrogenated carbon layers with relatively low index n and stainless steel-silicon and amorphous hydrogenated silicon layers with relatively high index n are examined with a view to solar selective surface applications. The development of structural porosity with associated reduction in n for layers deposited at high argon pressure significantly improves the solar absorptance of surfaces incorporating stainless steel-silicon or amorphous hydrogenated silicon layers.     

Fractional order and BICO disturbance observers for a run-of-mine ore milling circuit

Grinding mill circuits are hard to control due to poor plant models, large external disturbances, uncertainties from internal couplings, and process variables that are difficult to measure. This paper proposes a novel fractional order disturbance observer (FO-DOB) for a run-of-mine (ROM) ore milling circuit. A fractional order low pass filter (Q-filer) is used in the DOB to offer an additional degree of freedom in tuning for set-point tracking performance and disturbance rejection performance. Another disturbance observer is introduced in which a Bode ideal cut-off (BICO) filter is used for the Q-filter. A full non-linear plant model is used for evaluation of the performance gained over the ubiquitous PI controller. The simulation results show that the FO-DOB and BICO-DOB schemes are useful additional tools for ROM ore milling circuit control implementations.     

Recognition of depressed affect in hospitalized psychiatric patients: staff and patient perceptions

A comparison of self-report vs. observer rating of depressed mood in a heterogenous inpatient population revealed wide variations in concordance among diagnostic groups. Patients diagnosed as having Affective Psychosis and "Other' illnesses showed the highest correlation between four self-report scales and an observer rating scale. Patients with a diagnosis of depressive Neurosis showed only modest correlation, while Schizophrenics revealed no significant correlation, on these instruments, suggesting inconsistent communication of affect from Schizophrenic patients to observers. In contrast, when self-report scales were intercorrelated, patients in all four diagnostic categories showed highly significant correlations, indicating that they were consistently reporting their affective state on these instruments. The implications of these findings for future research as well as for practical clinical management are discussed.     

Treatability of Alternative Fuel Oxygenates Using Advanced Oxidation, Air Stripping, and Carbon Adsorption

Methyl tert-butyl ether (MTBE) is a gasoline oxygenate that has become a significant threat to groundwater supplies across the United States. Due to its physiochemical properties it has proven difficult and costly to remove from contaminated sites. This study was conducted to determine whether the alternative oxygenates (AO)—diisopropyl ether (DIPE), ethyltert-butyl ether (ETBE), tert-amyl methyl ether (TAME), tert-butyl alcohol (TBA), and ethanol (EtOH)—present a more efficient and less costly option from a remediation standpoint. Air stripping, carbon adsorption, and ultraviolet/H2O2 and O3/H2O2 advanced oxidation processes were examined at pilot scale to develop design parameters from which technical and economic comparisons were made for each alternative oxygenate versus MTBE. The experimental results showed that the ether AOs—DIPE, TAME, and ETBE—were each more efficiently and more economically treated than MTBE. The alternative alcohol oxygenates—TBA and EtOH—were less efficiently and less economically treated by the processes studied. The paper details the effects of primary process parameters and properties of individual oxygenates on process efficiency.     

Injury risk among children of low-income U.S.-born and immigrant mothers.

The number of immigrants in the United States is at an all time high, yet psychologists have largely ignored the domain of immigrant health. This article considers 1 aspect of immigrant health, risk for pediatric injury. A sample of over 5,000 5-year-old children from impoverished families was studied; approximately 13% had immigrant mothers. Children of immigrants had a significantly lower rate of injury in the prior year. This was particularly true of non-White children of immigrants. Three possible mediators for this finding--assistance with parenting, parenting style, and health care accessibility--were considered, but none explained the difference. The need for further research on the topic and implications of results for injury prevention are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Modular Reconfigurable Robots in Space Applications

Robots used for tasks in space have strict requirements. Modular reconfigurable robots have a variety of attributes that are well suited to these conditions, including: serving as many different tools at once (saving weight), packing into compressed forms (saving space) and having high levels of redundancy (increasing robustness). In addition, self-reconfigurable systems can self-repair and adapt to changing or unanticipated conditions. This paper will describe such a self-reconfigurable modular robot: PolyBot. PolyBot has significant potential in the space manipulation and surface mobility class of applications for space.