Analytical, numerical and experimental investigations of transverse fracture propagation from horizontal wells

This paper presents results of a comprehensive study involving analytical, numerical and experimental investigations into transverse fracture propagation from horizontal wells. The propagation of transverse hydraulic fractures from horizontal wells is simulated and investigated in the laboratory using carefully designed experimental setups. Closed-form analytical theories for Mode I (opening) stress intensity factors for idealized fracture geometries are reviewed, and a boundary element-based model is used herein to investigate non-planar propagation of fractures. Using the mixed mode fracture propagation criterion of the model, a reasonable agreement is found with respect to fracture geometry, net fracture pressures and fracture propagation paths between the modeled fractures and the laboratory tested fractures. These results suggest that the propagation of multiple fractures requires higher net pressures than a single fracture, the underlying reason of which is theoretically justified on the basis of local stress distribution.     

Inhibition of acid rock drainage from uranium ore waste using a conventional neutralization and precipitation treatment

Glass columns (length 50 cm, i.d. 4 cm) containing 900 g of uranium ore waste were subjected to a three-step process: (1) acid drainage generation, (2) neutralization and precipitation treatment and, again, (3) acid drainage generation. In the first acid generation step, lasting about one year, different variables (pyrite addition, inoculation and irrigation solution) were tested by measuring effluent pH, redox potential, total iron and sulphate. Conditions of acid generation were satisfactorily reproduced, reaching stable pH values around 2.0 that were determined mainly by pyrite addition and the type of irrigation solution used (distilled water or ferrous sulphate). The neutralization and precipitation treatment consisted of alternating irrigations of a neutralizing solution (CaO saturated plus NaOH) and a precipitating solution (ferric sulphate saturated). This treatment caused accumulation of basic iron sulphate and iron oxide precipitates according to SEM studies. After this treatment, the barrier effect created by the reaction products was checked, using irrigation solutions similar to the first step. The effluents collected showed higher pH and lower redox potential, total iron and sulphate values than those observed before the treatment, evidencing inhibition of acid drainage generation.     

Springback analysis of thin rectangular bars of non-linear work-hardening materials under torsional loading

A theoretical analysis of the springback of narrow rectangular strips of non-linear work-hardening material under torsional loading has been carried out. This theoretical analysis is supported by experimental results for rectangular mild steel strips of different thicknesses and lengths. Finally an analytical generalized expression relating angle of twist to twisting moment and residual angle of twist per unit length for rectangular strips under plastic torsion is obtained in non-dimensionalized form. A comparison between the results obtained for bars of non- linear and linear work-hardening materials loaded under torsion is also made.     

The onset of vortex instability in laminar forced convection flow through a horizontal porous channel

The onset of convective instability in a fluid-saturated porous layer between the two horizontal plates heated isothermally from below has been analyzed theoretically by using propagation theory. In the analysis the thermal dispersion coefficient is assumed to be proportional to the streamwise velocity. The results show that both inertia and thermal dispersion stabilize the system.     

FLOCCULATION OF ASPHALTENES AT HIGH PRESSURE. II. CALCULATION OF THE ONSET OF FLOCCULATION

The influence of pressure on the onset of flocculation of asphaltenes was calculated in the region from 1 to 300 bar and from 50 to 100°C. These calculations are the counterpart to our experimental data which, recently, have been reported in part 1 of an equally titled article [9]. As gas component methane and as precipitant i-octane were used. The asphaltene flocculation was considered to be a liquid-liquid equilibrium. For modelling the van der Waals equation of state (vdW-EOS) in the framework of continuous thermodynamics was applied. The composition of the crude oil was described by a continuous distribution function with respect to the solubility parameter δ of the Scatchard-Hildebrand theory. Within the distribution the asphaltenes represent the species with the highest δ-values. For oils with a very low content of asphaltenes the model developed describes the experimental flocculation data reasonably. In accordance to the experimental data the model predicts that, in the considered pressure range, without addition of i-octane asphaltene flocculation does not occur. However, on contrary to the experimental results, the model predicts the asphaltenes to show a higher flocculation tendency with increasing asphaltene content of the crude oil. For very high asphaltene contents the model even completely fails. Probably, the reason of this lack is the disregarding of asphaltene association.     

Using bald eagles to indicate the health of the Great Lakes' environment

The bald eagle (Haliaeetus leucocephalus) is one of the most studied birds of North America, and a great amount of natural life‐history information, including the response of various stressors on the eagles' ability to reproduce, are well known. In Michigan, the eagle has been chosen to track the trends of bioaccumulative compounds of concern across watersheds in the state. The state has been divided into major watersheds, and 20% of these are surveyed each year. A control area in northern Minnesota, Voyageurs National Park, is also sampled annually. We report here on the methods used, the preliminary results of the 1999 field season, and how differences in mercury concentrations varied over a 10‐year period. Mercury in feathers of nestling eagles declined over time only in Lakes Michigan and Huron, but have not decreased among other subpopulations in Michigan. Concentrations of polychlorinated biphenyls (PCBs) and 4,4′‐DDE in blood plasma from nestling eagles have declined over time for most subpopulations; however, they remain greater for breeding areas associated with the Great Lakes' food web. Sea eagles of the genus Haliaeetus are a good sentinel species to track trends in bioaccumulative compounds in aquatic systems.     

Micro-Analysis of the Contact Zone of Tribologically Loaded Second-Phase Reinforced Sol-Gel-Abrasives

Abrasives manufactured via the Sol-Gel route have increased the grinding efficiency of conventional abrasive grinding tools to a remarkable degree in the past ten years. Little is known, however, about detailed wear mechanisms of the abrasive on a nanometer scale. Sliding tests on a pin-on-disk tribometer and single grit scratching tests have therefore been performed in order to identify the wear mechanisms of these innovative materials. TEM-analysis has revealed that severe plastic deformation combined with both crack bridging and crack deflecting effects in the second phase characterise the abrasive rim zone. The surface of the abrasive is covered with an oxide debris layer which substantially improves the tribological behaviour.     

Properties of Carbopol Solutions as Models for Yield-Stress Fluids

ABSTRACT: The effect of pH on the non-Newtonian viscosity (η)of aqueous Carbopol 940 solutions is presented with high resolution (pH increments about 0.4) between pH = 2.8 and 12.7. Aqueous NaOH was used to adjust pH of 1.48 wt % Carbopol solutions. A Contraves viscometer was used to measure steady-flow shear stress at known shear rate (γ) over the range γ= 8 to 195 s⁻¹. Yield stresses and shear-thinning η(γ) were observed. Data were fitted with a Herschel-Bulkley model, whose parameters (including yield stress) were expressed as functions of pH. Comparisons were made of η(γ) to the dynamic viscometric properties η'(ω) and η*(ω) for comparable ranges of γ and frequency (ω): A fairly close match was found between η and η* but η«η'. pH dependence included previously unreported extrema of h(pH) in the range of pH = 6.2 to 6.6. Because of sensitive control of rheological properties with pH, Carbopol solutions can be used to mimic a great range of shear-thinning and yield-stress behavior that should make them useful for model studies directed toward process and equipment design and evaluation.     

Performance and modeling of advanced Ti:LiNbO3 digitaloptical switches

High-performance Y-branch digital optical switches realized in Ti:LiNbO₃ are presented. Their switching response functions have been optimized in terms of switch voltage and crosstalk ratio. The optimization is based on analyzing different types of waveguide shaping and switching arrangements using coupled mode theory and computer simulations. Excellent switching characteristics are achieved with devices exploiting a specially shaped waveguide branch in a dilated switch arrangement. Demonstrated performances include switching voltage as low as 9 V with crosstalk suppression better than 45 dB and fiber-to-fiber losses as low as 4 dB. Polarization independence with crosstalk suppression better than 40 dB over a 1520- to 1570-nm wavelength range is achieved for any applied switch voltage greater than 18 V. These optimized digital optical switches have further demonstrated the capability to reshape electrical input signals at switching rates of several hundred megahertz