Surface hydrolysis of filaments based on poly(trimethylene terephthalate) spun at high spinning speeds

The surface alkaline hydrolysis of fibers made from poly(trimethylene terephthalate) (PTT) was studied after extruding the polymer at high spinning speeds from 2000 to 6000 m/min and heat setting in the range of temperatures from 100 to 180°C. Fiber weight loss increased with an increasing heat‐setting temperature but it was also dependent on the spinning speed. Some of the partially hydrolyzed fibers had a well‐developed, hydrophilic surface, and pore size in the range of 0.69 to 1.20 μm. The optimum reaction and morphological conditions for increasing porosity in PTT fibers depends on spinning speed and heat‐setting temperature. A temperature of 180°C is the upper limit for heat‐setting PTT filaments but seems to be the most effective for making porous fibers. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1724–1730, 2004     

MET𝔸P: revisiting Privacy-Preserving Data Publishing using secure devices

The goal of Privacy-Preserving Data Publishing (PPDP) is to generate a sanitized (i.e. harmless) view of sensitive personal data (e.g. a health survey), to be released to some agencies or simply the public. However, traditional PPDP practices all make the assumption that the process is run on a trusted central server. In this article, we argue that the trust assumption on the central server is far too strong. We propose Met _??P, a generic fully distributed protocol, to execute various forms of PPDP algorithms on an asymmetric architecture composed of low power secure devices and a powerful but untrusted infrastructure. We show that this protocol is both correct and secure against honest-but-curious or malicious adversaries. Finally, we provide an experimental validation showing that this protocol can support PPDP processes scaling up to nation-wide surveys.     

Formation of water-resistant hyaluronic acid nanofibers by blowing-assisted electro-spinning and non-toxic post treatments

A unique blowing-assisted electro-spinning process has been demonstrated recently to fabricate hyaluronic acid (HA) nanofibers. In this article, effects of various experimental parameters, such as air-blowing rate, HA concentration, feeding rate of HA solution, applied electric field, and type of collector on the performance of blowing-assisted electro-spinning of HA solution were investigated. With the assistance of air-blowing, the solution-feeding rate could be increased to 40 μl/min/spinneret and the applied electric field could be decreased to 2.5 kV/cm. The optimum conditions for consistent fabrication of HA (with a molecular weight of ∼3.5 million) nanofibers involved the use of an air-blowing rate of around 70 ft³/h and a concentration range between 2.5 and 2.7% (w/v) in aqueous solution. Two benign methods to fabricate water-resistant HA nanofibrous membranes without the use of reactive chemical agents were demonstrated: (a) the exposure of HA membranes in hydrochloric acid (HCl) vapor, followed by a freezing treatment at −20 °C for 20-40 days; and (b) the immersion of HA membranes in an acidic mixture of ethanol/HCl/H₂O at 4 °C for 1-2 days. Although both methods could produce hydrophilic, substantially water-resistant HA nanofibrous membranes (the treated membranes could keep their shape intact in neutral water at 25 °C for about 1 week), the immersion method (6) was shown to be more versatile and effective. IR spectroscopy was used to investigate this ‘cross-linking’ mechanism in the solid HA membrane. Viscosity studies of acidic HA solutions under varying freezing conditions were also carried out. It was found that when the freezing time exceeded 8 h, the HA solution became gel-like and exhibited a large increase in the hydrogen-bond concentration. Thus, the resistance to water solubility could be due to the high density of hydrogen bonds in the solid HA membranes that were treated by the ‘freezing’ approach.     

AN ITERATIVE FILTERING ALGORITHM FOR NON-FOURIER FREQUENCY ESTIMATION

Abstract. We study an iterative filtering method to estimate frequencies of random Gaussian sinusoids in white noise. The method uses higher order crossings and takes advantage of a fixed point to guide the use of bandpass filtering in an attempt effectively to increase the signal-to-noise ratio. At each iteration the expected zero-crossing rate is estimated from independent time series. Convergence occurs with any prespecified probability less than one.     

硫代硫酸钠合成条件的优化

优化了亚硫酸钠与硫磺反应制备硫代硫酸钠的合成条件，最佳反应条件为：亚硫酸钠与硫磺质量比为7：2，亚硫酸钠与水质量比为1：1，溶液pH=10，反应时间30min，此时亚硫酸钠转化率为95．9％，产品纯度98．9％，收率94．5％。     

Effect of Water Vapor on the Release of Fission Gases from Uranium Oxycarbide in High-Temperature, Gas-Cooled Reactor Coated Fuel Particles

The hydrolysis of uranium oxycarbide (UCO) was studied by injecting water vapor into a fuel element containing a known number of high-temperature, gas-cooled reactor (HTGR) coated particles with exposed fuel kernels. The experiments were conducted in the High Flux Isotope Reactor (HFIR) at temperatures between 700° and 1000°C, a system pressure of 200 kPa, and partial pressures of water vapor between 21 and 199 Pa. The general sequential response of the exposed fuel kernels to water vapor addition consisted of (1) a rapid release of stored fission gas with a concomitant increase in the steady-state release and (2) a period of constant steady-state release. Upon cessation of the addition of water vapor, a decline in the release to prehydrolysis values generally occurred. The release of stored fission gas was dependent on the square of the partial pressure of water vapor. The ratio of the constant steady-state release to the prehydrolysis value was independent of the partial pressure of water vapor. The time constant for the decline in the release was the same in all of the hydrolysis tests.     

Self-assembly and crystallization behavior of a double-crystalline polyethylene-block-poly(ethylene oxide) diblock copolymer

The self-assembly and crystallization behavior of a well-defined low molecular weight polyethylene-block-poly(ethylene oxide) (PE-b-PEO) diblock copolymer was studied. The number-average degrees of polymerization for the PE and PEO blocks were 29 and 20, respectively. The molecular weight distribution was 1.04 as determined by size-exclusion chromatography. The PE-b-PEO sample exhibited two melting points at 28.7 and 97.4 °C for the PEO and the PE crystals, respectively. The crystallization of the PE blocks was unconfined, while the crystallization of the PEO blocks was confined between pre-existing PE crystalline lamellae, as demonstrated by simultaneous small-angle X-ray scattering (SAXS) and wide-angle X-ray diffraction (WAXD) studies. In the fully crystalline state, both PE and PEO blocks formed extended-chain crystals with PE chains tilted ∼22° from the lamellar normal and PEO chains parallel to the lamellar normal, as evidenced by two-dimensional WAXD study of shear-oriented samples. Regardless of hydrogen bonding among hydroxyl chain ends in the PEO blocks, interdigitated, single-crystalline layer morphology was observed for both PE and PEO crystals. The partial crystalline morphology, where the PE crystallizes and the PEO is amorphous, had the same overall d-spacing as the fully crystalline morphology. A double-amorphous PEO layer sandwiched between neighboring PE crystalline layers was deduced based on a chain conformation study using Fourier transform infrared. The confined crystallization kinetics for PEO blocks was investigated by differential scanning calorimetry, which could be explained by a heterogeneous nucleation mechanism. The slower crystallization rate in the PEO-block than the same molecular weight homopolymer was attributed to the effects of nanoconfinement and PEO chains tethered to the PE crystals.     

膨润土与碱反应的初步研究

将经焙烧与不经焙烧的膨润土与氢氧化钠反应，考察了反应时间和氢氧化钠浓度对膨润土中硅铝浸出的影响. 测定了不同焙烧温度和焙烧时间条件下膨润土与碳酸钠固相反应生成物中可溶性硅铝的含量，并通过热重分析实验对此固相反应进行了研究. 结果表明：接近碳酸钠熔点时固相反应最剧烈，膨润土中63.85%的SiO2和96.78%的Al2O3可被浸出转变为水溶性物质.     

图尔古松水电站泄洪深孔弧形闸门设计及融冰措施

图尔古松水电站位于东哈萨克斯坦州济良诺夫斯克西北30 km处,其深孔弧形闸门除承受高水头的静水压力、地震动水压力,还需考虑泥沙淤积以及温度变化的影响。弧形闸门是电站泄洪、排砂的主要控制设备,根据其受力与止水特点及环境特性,弧门设计采用主横框架结构,直支臂支撑,顶止水为P型和转铰止水双重水封,设计为温度-51~40℃,除考虑材料热胀冷缩的影响,还设计了有效的融冰措施,可满足挡水、运行和检修要求。     

Playing Mastermind with Constant-Size Memory

We analyze the classic board game of Mastermind with n holes and a constant number of colors. The classic result of Chvátal (Combinatorica 3:325–329, 1983) states that the codebreaker can find the secret code with Θ(n/logn) questions. We show that this bound remains valid if the codebreaker may only store a constant number of guesses and answers. In addition to an intrinsic interest in this question, our result also disproves a conjecture of Droste, Jansen, and Wegener (Theory Comput. Syst. 39:525–544, 2006) on the memory-restricted black-box complexity of the OneMax function class.