Improved cytotoxicity testing of magnesium materials

Metallic magnesium (Mg) and its alloys are highly suitable for medical applications as biocompatible and biodegradable implant materials. Magnesium has mechanical properties similar to bone, stimulates bone regeneration, is an essential non-toxic element for the human body and degrades completely within the body environment. In consequence, magnesium is a promising candidate as implant material for orthopaedic applications. Protocols using the guideline of current ISO standards should be carefully evaluated when applying them for the characterization of the cytotoxic potential of degradable magnesium materials. For as-cast material we recommend using 10 times more extraction medium than recommended by the ISO standards to obtain reasonable results for reliable cytotoxicity rankings of degradable materials in vitro. In addition primary isolated human osteoblasts or mesenchymal stem cells should be used to test magnesium materials.     

Critical aspects of sinter-hardening of prealloyed Cr–Mo steel

In recent years, growing demand for greater mechanical properties of PM steel components with competitive fabrication cost has led to significant innovations in different fields of powder metallurgy. Recent research has been focused on reaching higher performance with lower cost. To this end, the possibility of combining the conventional sintering and post-sintering processes for a particular powder composition has been introduced. Sinter-hardening is a result of the research conducted along this line. Elimination of any secondary operation such as quench-hardening by incorporating it in the sintering process (i.e. sinter-hardening) is of great interest, as it will lead to lower processing costs and equal, if not higher mechanical performance. However, to ensure the desired mechanical properties of the final component and robustness of the performance, critical aspects of the sinter-hardening process should be rigorously studied.Hence with specific attention to a Cr–Mo steel powder (FL-5305), this study deals with the influence of density on cooling rate, the effect of different sintering temperatures (e.g. 1120 °C and 1250 °C) on austenite grain size and consequently, hardenability. The microstructure development in sinter-hardened FL-5305 material has been analyzed and predicted by means of the available literature for solid steel and also using the commercial software (JMatPro 5.0) for materials assessment based on thermodynamic and kinetics modeling. Finally, inaccurate carbon control and its adverse impact on excessive formation of cementite have been addressed.     

Two-dimensional linear-combination model fitting of magnetic resonance spectra to define the macromolecule baseline using FiTAID,a Fitting Tool for Arrays of Interrelated Datasets

Object  

To propose the determination of the macromolecular baseline (MMBL) in clinical 1H MR spectra based on T₁ and T₂ differentiation using 2D fitting in FiTAID, a general Fitting Tool for Arrays of Interrelated Datasets.     

Zur Problematik der selektiven Erfassung von PSP-Toxinen aus Muscheln

Zusammenfassung Die Messung der PSP-Belastung (paralytic shellfish poisoning) von Schalentieren erfolgt vor allem mit Hilfe des Maus-Biotestes. Um PSP-Toxine sowohl qualitativ als auch quantitativ besser bestimmen zu können, wurden chromatographische Verfahren mit Fluorescenzdetektion entwickelt. Diese HPLC-Methoden sowie die Kopplung HPLC/MS gelangten zum Einsatz, um in spanischen Muschelkonserven ein neben Saxitoxin vermutetes zweites PSP-Toxin nachzuweisen. Es zeigte sich, daß in den 1986 in der Bundesrepublik Deutschland wegen zu hoher PSP-Konzentrationen beanstandeten Muschelkonserven vor allem Decarbamoyl-Saxitoxin enthalten war.

---

The problem of the selective determination of PSP-toxins in mussels

Summary Levels of paralytic shellfish poisoning (PSP) toxins in shellfish are routinely determined by mouse bioassay: In order to improve the qualitative and quantitative determination of PSP toxins, Chromatographic techniques with fluorescence detection have been developed. These HPLC methods and the HPLC/MS coupling were used to determine a second PSP toxin which was found, in addition to saxitoxin, in canned Spanish mussels. These canned mussels were rejected in 1986 by the German food control because PSP concentrations were too high. It has been shown that these samples contained mainly dc-saxitoxin.

---

---

Herrn Professor Dr. A. Montag zum 60. Geburtstag gewidmet     

Solution‐Processed GaSe Nanoflake‐Based Films for Photoelectrochemical Water Splitting and Photoelectrochemical‐Type Photodetectors

Gallium selenide (GaSe) is a layered compound, which has been exploited in nonlinear optical applications and photodetectors due to its anisotropic structure and pseudodirect optical gap. Theoretical studies predict that its 2D form is a potential photocatalyst for water splitting reactions. Herein, the photoelectrochemical (PEC) characterization of GaSe nanoflakes (single‐/few‐layer flakes), produced via liquid phase exfoliation, for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in both acidic and alkaline media is reported. In 0.5 m H₂SO₄, the GaSe photoelectrodes display the best PEC performance, corresponding to a ratiometric power‐saved metric for HER (Φ_saved,HER) of 0.09% and a ratiometric power‐saved metric for OER (Φ_saved,OER) of 0.25%. When used as PEC‐type photodetectors, GaSe photoelectrodes show a responsivity of ≈0.16 A W^?1 upon 455 nm illumination at a light intensity of 63.5 µW cm^?2 and applied potential of ?0.3 V versus reversible hydrogen electrode (RHE). Stability tests of GaSe photodetectors demonstrated a durable operation over tens of cathodic linear sweep voltammetry scans in 0.5 m H₂SO₄ for HER. In contrast, degradation of photoelectrodes occurred in both alkaline and anodic operation due to the highly oxidizing environment and O₂‐induced (photo)oxidation effects. The results provide new insight into the PEC properties of GaSe nanoflakes for their exploitation in photoelectrocatalysis, PEC‐type photodetectors, and (bio)sensors.     

Automatic quantification of changes in bone in serial MR images of joints

Recent innovations in drug therapies have made it highly desirable to obtain sensitive biomarkers of disease progression that can be used to quantify the performance of candidate disease modifying drugs. In order to measure potential image-based biomarkers of disease progression in an experimental model of rheumatoid arthritis (RA), we present two different methods to automatically quantify changes in a bone in in-vivo serial magnetic resonance (MR) images from the model. Both methods are based on rigid and nonrigid image registration to perform the analysis. The first method uses segmentation propagation to delineate a bone from the serial MR images giving a global measure of temporal changes in bone volume. The second method uses rigid body registration to determine intensity change within a bone, and then maps these into a reference coordinate system using nonrigid registration. This gives a local measure of temporal changes in bone lesion volume. We detected significant temporal changes in local bone lesion volume in five out of eight identified candidate bone lesion regions, and significant difference in local bone lesion volume between male and female subjects in three out of eight candidate bone lesion regions. But the global bone volume was found to be fluctuating over time. Finally, we compare our findings with histology of the subjects and the manual segmentation of bone lesions.     

B-spline explicit active surfaces: an efficient framework for real-time 3-D region-based segmentation

A new formulation of active contours based on explicit functions has been recently suggested. This novel framework allows real-time 3-D segmentation since it reduces the dimensionality of the segmentation problem. In this paper, we propose a B-spline formulation of this approach, which further improves the computational efficiency of the algorithm. We also show that this framework allows evolving the active contour using local region-based terms, thereby overcoming the limitations of the original method while preserving computational speed. The feasibility of real-time 3-D segmentation is demonstrated using simulated and medical data such as liver computer tomography and cardiac ultrasound images.     

Functionalized Graphene as Extracellular Matrix Mimics: Toward Well‐Defined 2D Nanomaterials for Multivalent Virus Interactions

Polysulfated nanomaterials that mimic the extracellular cell matrix are of great interest for their potential to modulate cellular responses and to bind and neutralize pathogens. However, control over the density of active functional groups on such biomimetics is essential for efficient interactions, and this remains a challenge. In this regard, producing polysulfated graphene derivatives with control over their functionality is an intriguing accomplishment in order to obtain highly effective 2D platforms for pathogen interactions. Here, a facile and efficient method for the controlled attachment of a heparin sulfate mimic on the surface of graphene is reported. Dichlorotriazine groups are conjugated to the surface of graphene by a one‐pot [2+1] nitrene cycloaddition reaction at ambient conditions, providing derivatives with defined functionality. Consecutive step by step conjugation of hyperbranched polyglycerol to the dichlorotriazine groups and eventual conversion to the polyglycerol sulfate result in the graphene based heparin biomimetics. Scanning force microscopy, cryo‐transmission electron microscopy, and in vitro bioassays reveal strong interactions between the functionalized graphene (thoroughly covered by a sulfated polymer) and vesicular stomatitis virus. Infection experiments with highly sulfated versions of graphene drastically promote the infection process, leading to higher viral titers compared to nonsulfated analogues.