Study of glasses/glass-ceramics in the SrO-ZnO-SiO2 system as high temperature sealant for SOFC applications

Glasses having composition (in wt.%) 51SrO-9ZnO-(40−x)SiO₂ (SZS), where x represents the additives like B₂O₃, Al₂O₃, V₂O₅, and Cr₂O₃, were prepared by melt-quench method and transformed into glass-ceramics by controlled crystallization based on differential thermal analysis (DTA) data. Glasses and glass-ceramics were characterized using dilatometry, X-ray diffraction (XRD), microhardness, and Raman spectroscopy. XRD revealed that glass-ceramics are composed of mainly Sr₂ZnSi₂O₇ and SrSiO₃ crystalline phases along with residual glassy phase. Raman spectroscopy showed that main constitutes of the glass network are the Q¹ and Q² silicate structural units. With the addition of B₂O₃ and other additives silicate glass network depolymerizes and concentration of Q¹ structural units increases at the expense of Q² units. Formation of phases during crystallization depends on the presence of different silicate structural units in the glass matrix. B₂O₃ goes into the glass network as triangular (BO₃) borate structural units and at higher concentration of B₂O₃, only a part of the B₂O₃ forms tetragonal (BO₄) structural units. Investigated glasses and glass-ceramics have thermal expansion coefficient (TEC) in the range of 105-120 × 10⁻⁷/°C which matches with TEC of other cell components. B₂O₃ containing SZS glasses show good adhesion/bonding with YSZ and Crofer 22 APU. Elemental line scans indicate that interdiffusion of Fe, Cr and Si across interface is responsible for good bonding with Crofer 22 APU and interdiffusion of Sr, Si, Y and Zr is responsible for good bonding with YSZ.     

Studies on the dielectric and relaxor behavior of sol-gel derived barium strontium zirconate titanate thin films

The dielectric behavior of sol-gel derived Ba_0.80Sr_0.20(Zr_xTi_1−x)O₃ (0.0 ≤ x ≤ 0.50) thin films is studied. A relaxor behavior is observed for x ≥ 0.35. The degree of relaxation increases with Zr content. The frequency dependence of the polar regions follows Vogel-Fulcher relation with a characteristic cooperative freezing at freezing temperature (T_f). Below T_f, a long range polarization ordering is likely to take place. The plausible mechanism of the relaxor behavior of BSZT thin films with Zr contents ≥ 0.35 has been proposed based on the measured temperature as well as frequency dependent dielectric data. The solid solution system is visualized as a mixture of Ti^+ 4 rich polar regions and Zr^+ 4 rich regions; with the increase in Zr content the volume fraction of the polar regions is progressively reduced. At and above 35.0 at.% Zr substitution the polar regions exhibit typical relaxor behavior.     

ERICE, a novel FLICE-activatable caspase

Programmed cell death, or apoptosis, is a process of fundamental importance to cellular homeostasis in metazoan organisms (Ellis, R. E., Yuan, J., and Horvitz, H. R. (1991) Annu. Rev. Cell Biol. 7, 663-698). The caspase family of mammalian proteases, related to the nematode death protein CED-3, plays a crucial role in apoptosis and inflammation. We report here the isolation and characterization of a new caspase, tentatively termed ERICE (Evolutionarily Related Interleukin-1beta Converting Enzyme). Based on phylogenetic analysis, ERICE (caspase-13) is a member of the ICE subfamily of caspases which includes caspase-1 (ICE), caspase-4 (ICErel-II, TX, ICH-2), and caspase-5 (ICErel-III, TY). Overexpression of ERICE induces apoptosis of 293 human embryonic kidney cells and MCF7 breast carcinoma cells. Like other members of the subfamily, ERICE is not activated by the serine protease granzyme B, a caspase-activating component of cytotoxic T cell granules. Therefore, ERICE most likely does not play a role in granzyme B-induced cell death. ERICE, however, was activated by caspase-8 (FLICE, MACH, Mch-5), the apical caspase activated upon engagement of death receptors belonging to the tumor necrosis factor family. This is consistent with a potential role for ERICE in this receptor-initiated death pathway.     

Effect of various lipid-bile salt mixed micelles on the intestinal absorption of amphotericin-B in rat

We investigated the effect of the somatosensory functions to the outcomes of motor functions in 28 patients with thalamic hemorrhage. The disturbance of the pyramidal tracts was assessed by the destruction of the internal capsule found in computed tomography (CT). The disturbance of the somatosensory function was analyzed by the N20 component of short-latency somatosensory evoked potentials (SSEP). The outcomes of motor function was evaluated after 3 months of ictus. Correlations between the outcomes of motor function, disturbance of the pyramidal tract, and disturbance of the somatosensory function were discussed. The result indicated that functional outcomes statistically correlated with neither disturbance of the internal capsule alone nor disturbance of N20 alone. But, there was statistically significant between functional outcomes and the combination of disturbance of the internal capsule with disturbance of N20 (p < 0.05, Wilcoxon signed-rank). There was not statistical difference in hematoma volume or consciousness. The implications of these results suggest that somatosensory function may affect the recovery of motor functions.     

Experimental,equilibrium modelling,and column design for the reactive separation of biomass-derived 2-furoic acid

Electrochemical conversion of biomass to value-added chemicals has gained impetus in recent years. Herein, we present a methodology for recovering biomass-derived 2-furoic acid from the dilute aqueous stream by reactive extraction. The reactive extraction was performed using a chemical extractant, trioctylamine (TOA), with diluents (octanol, chloroform, and diethyl ether). Equilibrium parameters influencing the recovery of 2-furoic acid were evaluated. Using TOA in various diluents, the 2-furoic acid was recovered with 85%–99% efficiency. A 1:1 complex of the 2-furoic acid—TOA was formed in the organic phase, and the experimental equilibrium complexation constant was compared with that obtained from the relative basicity and Langmuir models. The equilibrium parameters were used for column design to estimate the solvent to feed ratio (S/F) and the number of theoretical stages (NTS). The NTS required is 12 to attain 99% recovery of 2-furoic acid in counter-current extraction. The present study sheds light on the reactive extraction process adopted for process intensification with electrochemical conversion, paving the way for the commercialization of valuable products obtained from biomass.     

Material properties and operating configurations of membrane reactors for propane dehydrogenation

A modeling‐based approach is presented to understand physically realistic and technologically interesting material properties and operating configurations of packed‐bed membrane reactors (PBMRs) for propane dehydrogenation (PDH). PBMRs composed of microporous or mesoporous membranes combined with a PDH catalyst are considered. The influence of reaction and membrane transport parameters, as well as operating parameters such as sweep flow and catalyst placement, are investigated to determine desired “operating windows” for isothermal and nonisothermal operation. Higher Damköhler (Da) and lower Péclet (Pe) numbers are generally helpful, but are much more beneficial with highly H₂‐selective membranes rather than higher‐flux, lower‐selectivity membranes. H₂‐selective membranes show a plateau region of conversion that can be overcome by a large sweep flow or countercurrent operation. The latter shows a complex trade‐off between kinetics and permeation, and is effective only in a limited window. H₂‐selective PBMRs will greatly benefit from the fabrication of thin (～1 µm or less) membranes. © 2014 American Institute of Chemical Engineers AIChE J, 61: 922–935, 2015     

Enhancement in electrical and magnetodielectric properties of Ca‐ and Ba‐doped BiFeO3 polycrystalline ceramics

We carried out a comparative study on the electrical and magnetodielectric properties of polycrystalline BiFeO₃, Bi_0.9Ca_0.1FeO_2.95, Bi_0.9Ba_0.05Ca_0.05FeO_2.95, and Bi_0.9Ba_0.1FeO_2.95 ceramics. The two dielectric anomalies, near 25 K and 281 K, are observed for BiFeO₃. Interestingly, the anomaly near 25 K shifts towards a higher temperature above 60 K with Ca and/or Ba doping, attributed to the doping induced chemical pressure. In addition, the room temperature switchable magnetodielectric effect is witnessed for the doped BiFeO₃ compounds, due to the quadratic magnetoelectric coupling. This indicates the improved magnetoelectric coupling in BiFeO₃ with the Ca and Ba doping. This is essentially due to the enhanced magnetic ordering and reduced leakage current in BiFeO₃ after the doping.     

Epitope‐Resolved Detection of Peanut‐Specific IgE Antibodies by Surface Plasmon Resonance Imaging

Peanut allergy can be life‐threatening and is mediated by allergen‐specific immunoglobulin E (IgE) antibodies. Investigation of IgE antibody binding to allergenic epitopes can identify specific interactions underlying the allergic response. Here, we report a surface plasmon resonance imaging (SPRi) immunoassay for differentiating IgE antibodies by epitope‐resolved detection. IgE antibodies were first captured by magnetic beads bearing IgE ?‐chain‐specific antibodies and then introduced into an SPRi array immobilized with epitopes from the major peanut allergen glycoprotein Arachis hypogaea h2 (Ara h2). Differential epitope responses were achieved by establishing a binding environment that minimized cross‐reactivity while maximizing analytical sensitivity. IgE antibody binding to each Ara h2 epitope was distinguished and quantified from patient serum samples (10 μL each) in a 45 min assay. Excellent correlation of Ara h2‐specific IgE values was found between ImmunoCAP assays and the new SPRi method.     

Cuphea a rich source of medium chain triglycerides: Fatty acid composition and oil diversity in Cuphea procumbens

The phenological characteristics, oil content, and fatty acid composition of 34 selections of Cuphea procumbens have been studied. The mean seed yield per plant was 9.7 ± 0.43 g. Maximum seed yield (16.7 g) was noticed in NBC‐27, while the average number of fruits per plant was 124.9 ± 10.7. The oil content in the seeds ranged from 16.7—28.7%, maximum being in NBC‐34. The fatty acid composition revealed the presence of capric acid (C10:0) in all the selections of C. procumbens as the major constituent of the oil ranging from 87.7—94.6%. C. procumbens showed its novelty as an alternative source of capric acid and may be utilized as a renewable resource in the production of plasticizers and lubricants which wholly depend on petrochemical import. Researches are in progress in order to obtain tolerant cultivars against wild plant characteristics and some delayed seed shattering plants have been identified.     

Development of solid state pulse power modulator using toroidal amorphous core

This paper discusses the experiments conducted for the development of 50 kV, 10 A, 10 μs duration, and rise time of 2 μs solid state pulse power modulator using toroidal amorphous steel core and low cost IGBT switches. The experiments revealed (i) the need for new design methodologies based on energy transfer between the electrical and magnetic systems and (ii) the success of low-cost switching circuit.