Regulation of Polymer Configurations Enables Green Solvent-Processed Large-Area Binary All-Polymer Solar Cells With Breakthrough Performance and High Efficiency Stretchability Factor

With the great potential of the all-polymer solar cells for large-area wearable devices, both large-area device efficiency and mechanical flexibility are very critical but attract limited attention. In this work, from the perspective of the polymer configurations, two types of terpolymer acceptors PYTX-A and PYTX-B (X = Cl or H) are developed. The configuration difference caused by the replacement of non-conjugated units results in distinct photovoltaic performance and mechanical flexibility. Benefiting from a good match between the intrinsically slow film-forming of the active materials and the technically slow film-forming of the blade-coating process, the toluene-processed large-area (1.21 cm²) binary device achieves a record efficiency of 14.70%. More importantly, a new parameter of efficiency stretchability factor (ESF) is proposed for the first time to comprehensively evaluate the overall device performance. PM6:PYTCl-A and PM6:PYTCl-B yield significantly higher ESF than PM6:PY-IT. Further blending with non-conjugated polymer donor PM6-A, the best ESF of 3.12% is achieved for PM6-A:PYTCl-A, which is among the highest comprehensive performances.     

Implementation of pseudo-nondiffracting beams by use of diffractive phase elements

We report the experimental implementation of pseudo-nondiffracting beams by use of diffractive phase elements (DPE's). Based on the conjugate-gradient method presented in J. Opt. Soc. Am. A 15, 144-151 (1998), these DPE's are designed and fabricated on a flat quartz substrate. The experimental results show that the performance of the fabricated DPE's is in good agreement with the theoretical prediction.     

A network-based mobility management scheme for future Internet

The current Internet was originally designed for “fixed” terminals and can hardly support mobility. It is necessary to develop new mobility management schemes for the future Internet. This paper proposes an Identifiers Separating and Mapping Scheme (ISMS), which is a candidate for the future Internet mobility management, and discusses the basic principles and detailed message flow. ISMS is a network-based mobility management scheme that takes advantage of the identity and location separation. The mobility entities in the core network are responsible for the location management. ISMS is designed to satisfy the requirements of faster handover, route optimism, advanced management, location privacy and security. The average handover delay of ISMS is on the order of milliseconds only, which is far smaller than that of Mobile IPv6. Analyses show that ISMS can reduce packet overhead on wireless channels. We build a prototype and perform some experiments. Results verify the feasibility of ISMS.     

Embedding multi-dimensional meshes into twisted cubes

The twisted cube is an important variant of the most popular hypercube network for parallel processing. In this paper, we consider the problem of embedding multi-dimensional meshes into twisted cubes in a systematic way. We present a recursive method for embedding a family of disjoint multi-dimensional meshes into a twisted cube with dilation 1 and expansion 1. We also prove that a single multi-dimensional mesh can be embedded into a twisted cube with dilation 2 and expansion 1. Our work extends some previously known results.     

未雨绸缪 防患未然——“柔性测试”助力泛华测控提供高可靠性测试系统

<正>毋庸置疑,"可靠性"一直是评价电子产品性能的关键词之一,尤其在军工、航天等领域,产品的可靠性更是具有举足轻重的地位。一个细小器件的故障引发系统重大事故的案例屡见不鲜。随着人们对可靠性的重要性认识的不断提高,业内对可靠性理论及可靠性设计的研究也不断深入。12月2日,由中国电子     

The effect of the aspect ratio on the hydrophobicity of microstructured polydimethylsiloxane (PDMS) robust surfaces

In this study, we have designed and fabricated robust hydrophobic surfaces that are composed of various micropillar arrays and investigated the effect of the aspect ratio (feature height/feature size) of the micropillar on the wettability of the fabricated surfaces. The robust, micropillar-arrayed surfaces were designed to yield the same Wenzel and Cassie water contact angles (CAs). According to our design rule, one can achieve an enhanced hydrophobic surface by increasing the height of the micropillars. The designed hydrophobic surfaces were fabricated by polydimethylsiloxane (PDMS) replica molding with photolithographically micropatterned SU-8 masters. The hydrophobicity properties of the fabricated PDMS surfaces were fully characterized theoretically and experimentally. From the theoretical and experimental results, it was found that the micropillars of an intrinsically hydrophobic material with a high aspect ratio enhance the hydrophobicity of the surface by increasing the surface roughness (in view of the Wenzel state) and the opportunities for the entrapment of air beneath a water droplet (the Cassie state).     

Optimization of optical lens-controlled scanning electron microscopic resolution using generalized regression neural network and genetic algorithm

A scanning electron microscope (SEM) is a sophisticated equipment employed for fine imaging of a variety of surfaces. In this study, prediction models of SEM were constructed by using a generalized regression neural network (GRNN) and genetic algorithm (GA). The SEM components examined include condenser lens 1 and 2 and objective lens (coarse and fine) referred to as CL1, CL2, OL-Coarse, and OL-Fine. For a systematic modeling of SEM resolution (R), a face-centered Box–Wilson experiment was conducted. Two sets of data were collected with or without the adjustment of magnification. Root-mean-squared prediction error of optimized GRNN models are GA 0.481 and 1.96×10^-12 for non-adjusted and adjusted data, respectively. The optimized models demonstrated a much improved prediction over statistical regression models. The optimized models were used to optimize parameters particularly under best tuned SEM environment. For the variations in CL2 and OL-Coarse, the highest R could be achieved at all conditions except a larger CL2 either at smaller or larger OL-Coarse. For the variations in CL1 and CL2, the highest R was obtained at all conditions but larger CL2 and smaller CL1.     

齐次等式约束线性回归模型条件根方估计的效率

对齐次等式约束线性回归模型回归系数的约束最小二乘估计提出改进,引入一种估计的相对效率,证明在一定条件下,狭义条件根方估计、广义条件根方估计的效率均高于约束最小二乘估计的效率．     

支持普适服务的新一代网络传输层构架

新一代网络没有准确定义,但普遍共识是提供全分组网络和普适服务.其中分组网络一般认为采用IP分组,但普适服务仍不清晰.3G、4G中称"泛在服务";NGI、NGN中强调无缝融合电信网和互联网服务;计算机界类似的概念是"普适计算";IEEE普适服务会议汇聚各种思想,首次提出了"普适服务"的模糊概念.虽然上述研究对普适服务的定义并不统一,但普遍共识是:多样化的服务种类、多样化的网络接入.文中分析传输层在新一代网络设计中的重要地位,以提供普适服务为目标,通过多连接抽象表示服务多样化、多路径抽象表示接入多样化,给出符合新一代网络要求的传输层构架.基于这一构架,可以提高网络的QoS支持、安全可靠性、移动性、可控可管性.文中通过理论分析和原型实现证明了新构架的正确性和可行性.