废塑料改性沥青的性能研究

通过沥青基本性能测试、荧光显微镜观察研究了废塑料（PE）对改性沥青高温性能的影响及其机理,并通过对改性沥青混合料的马歇尔稳定度测试及对沥青混合料断口观察研究了混合料的强度及高温性能。结果表明：废PE达到一定剂量时,在沥青中形成网状结构,增强了改性沥青的高温性能；加入废PE后,沥青与矿料的结合强度提高,提高了沥青混合料的高温稳定性。     

Kernel-based least squares policy iteration for reinforcement learning.

In this paper, we present a kernel-based least squares policy iteration (KLSPI) algorithm for reinforcement learning (RL) in large or continuous state spaces, which can be used to realize adaptive feedback control of uncertain dynamic systems. By using KLSPI, near-optimal control policies can be obtained without much a priori knowledge on dynamic models of control plants. In KLSPI, Mercer kernels are used in the policy evaluation of a policy iteration process, where a new kernel-based least squares temporal-difference algorithm called KLSTD-Q is proposed for efficient policy evaluation. To keep the sparsity and improve the generalization ability of KLSTD-Q solutions, a kernel sparsification procedure based on approximate linear dependency (ALD) is performed. Compared to the previous works on approximate RL methods, KLSPI makes two progresses to eliminate the main difficulties of existing results. One is the better convergence and (near) optimality guarantee by using the KLSTD-Q algorithm for policy evaluation with high precision. The other is the automatic feature selection using the ALD-based kernel sparsification. Therefore, the KLSPI algorithm provides a general RL method with generalization performance and convergence guarantee for large-scale Markov decision problems (MDPs). Experimental results on a typical RL task for a stochastic chain problem demonstrate that KLSPI can consistently achieve better learning efficiency and policy quality than the previous least squares policy iteration (LSPI) algorithm. Furthermore, the KLSPI method was also evaluated on two nonlinear feedback control problems, including a ship heading control problem and the swing up control of a double-link underactuated pendulum called acrobot. Simulation results illustrate that the proposed method can optimize controller performance using little a priori information of uncertain dynamic systems. It is also demonstrated that KLSPI can be applied to online learning control by incorporating an initial controller to ensure online performance.     

Optimal Conditions for Preparing Ultra-Fine CeO2 Powders in A Submerged Circulative Impinging Stream Reactor

Cerium carbonate powders were produced in a submerged circulation impinging stream reactor (SCISR) from Ce(NO3)3·6H2O. NH4HCO3 was used as a precipitant in the reaction. Cerium carbonate powders were roasted to produce ultra-fine cerium dioxide (CeO2) powders. The optimal conditions of such production process were obtained by orthogonal and one-factor experiments. The results showed that ultra-fine and narrowly distributed cerium carbonate powders were produced under the optimal flowing conditions. The concentrations of Ce(NO3)3 and NH4HCO3 solutions were 0.25 and 0.3 mol·L-1, respectively. The concentration of PEG4000 added in these two solutions was 4 g·L-1. The stirring ratio, reaction temperature, feeding time, solution pH, reaction time and digestion time were 900 r·min-1, 80 ℃, 20 min, 5～6, 5 min and 1 h, respectively. The final product, CeO2 powders, was obtained by roasting the produced cerium carbonate in air for 3 h at 500 ℃. The finally produced CeO2 powders were torispherical particles with a narrow size distribution of 0.8～2.5 μm. The crystal structure of CeO2 powders belonged to cubic crystal system and its space point group was O5H-FM3M. Under optimal conditions, powders produced by SCISR were finer and more narrowly distributed than that by Stirred Tank Reactor (STR).     

PLANTSCAPE系统在长庆银川配气站的应用

银川配气站是长庆油田公司采气一厂下属配气站之一,地处宁夏银川市长庆石油基地,肩负着向近10家天然气用户供气的任务,供气量也逐年增大,旧的生产模式(如双波纹管流量计量)已不能满足生产的需求。所以我们引进了HONEYWELL公司的PLANTSCAPE工业控制系统,该系统达到国际先进水平,在国内属于领先地位。伴随着气田的大规模开发,外供气量的逐年增加,此系统必将发挥更大的作用,对长庆气田的可持续发展具有十分重要的意义。     

军械调运方案优化算法的设计与仿真

军械调运问题的数学模型和手工算法过去已有研究,但是当问题较为复杂时,手工算法就要花费大量时间而且准确性也难以保证。针对这一缺陷,本文在已有的数学模型和手工算法的基础上,设计了一种可以用计算机实现的基于递归的算法来寻求军械紧急调运问题的最优方案,并使用面向对象的java语言将算法实现。     

非数值化产品形位描述模型

传统的形状及位置表示模型通常是建立在低层次的无应用意义的几何拓扑元素之上，因而无法很好地支持计算机辅助设计（ＣＡＤ）向实用化和智能化方向发展。本文提出了一种非数值化的基于约束的产品形位描述模型，并对该模型中存在的一些问题进行了深入的讨论。该模型符合设计人员实际设计思维与过程，同时也支持高层次产品设计信息以及产品的设计过程信息，因而为传统ＣＡＤ系统向新一代实用化智能化ＣＡＤ系统过渡提供了一个良好的产品形位表示模型。     

一种新型的多层复合软包装材料

综述了高阻隔性层合食品软包装的现状及发展趋势。介绍了以ＰＣ为结构层的新型多层复合材料ＰＣ／ＥＶＯＨ／ＰＰ，并评价了它在高阻隔性、高温、高湿、共挤加工等方面的综合性能及用于层含软包装的可行性。     

适用于实时协同编著系统的并发控制研究

实时协同编著系统是最受欢迎的实时ＣＳＣＷ应用系统之一，适用于实时协同编著系统的并发控制用于解决参与协同工作用户对共享对象操作时存在的冲突问题。本文对这种新的并发控制与适用于分布式数据库系统等的传统并发控制进行了比较，讨论了一些适用于实时协同编著系统并发控制方法的新评价参数，分析了传统并发控制方法应用到实时协同编著系统时所遇到的问题。最后，我们介绍了一些文献中已有原型系统所使用的并发控制方法。     

GaAs、GaP、InP、InGaAsP、AlGaAs、InAlGaAs的化学腐蚀研究

为研制全集成光开关、微片式激光器等，对ＧａＡｓ、ＧａＰ、ＩｎＧａＡｓＰ、ＩｎＡＩＧａＡｓ、ＡｌＧａＡｓ等材料的化学腐蚀进行了实验研究。为了研制ＩｎＡｌＧａＡｓ／ＩｎＡｌＡｓ／ＩｎＡｌＧａＡｓ微片式激光器，开发了Ｈ３ＰＯ４／Ｈ２Ｏ２／Ｈ２Ｏ薄层腐蚀液和ＨＣｌ／Ｈ２Ｏ选择性腐蚀液；为了研制ＩｎＧａＡｓＰ／ＩｎＰ／ＩｎＧａＡｓＰＴｂａｒ型光波导，开发了ＨＣｌ／Ｈ３ＰＯ４／Ｈ２Ｏ２薄层腐蚀液和ＨＣｌ／Ｈ２Ｏ２选择性腐蚀液；为了研制ＧａＰ、ＩｎＧａＰ光波导，开发了ＨＣｌ／ＨＮＯ３／Ｈ２Ｏ薄层腐蚀液。它们都具有稳定、重复性好、速率可控、腐蚀后表面形貌好等特点。除此之外，蚀刻成的ＧａＰ光波导侧壁平滑无波纹起伏。此种结果尚未见报导。