Development of a Virtual Reality Structural Analysis System

This paper discusses the development of virtual structural analysis program (VSAP). This is a virtual environment (VE) based structural analysis system developed through a collaborative effort between the School of Architecture + Design and the Department of Computer Science at Virginia Polytechnic Institute and State Univ. (Virginia Tech). The VSAP was developed by linking a visualization routine using the simple VE library and a structural analysis software, the PC-SAP4. Details of the design of four user interfaces for the VSAP are presented. These user interfaces are: the immersive pen and tablet interface, the desktop interface, the portable immersive interface, and the cave automatic VE immersive interface. Usability studies for each interface were conducted. Results of these studies indicated that the users of VSAP were highly satisfied with the experience. In addition, all the developed interfaces were found to be successful for their specific application.     

Tubular membrane cathodes for scalable power generation in microbial fuel cells

One of the greatest challenges for using microbial fuel cells (MFCs) for wastewater treatment is creating a scalable architecture that provides large surface areas for oxygen reduction at the cathode and bacteria growth on the anode. We demonstrate here a scalable cathode concept by showing that a tubular ultrafiltration membrane with a conductive graphite coating and a nonprecious metal catalyst (CoTMPP) can be used to produce power in an MFC. Using a carbon paper anode (surface area Aan = 7 cm2, surface area per reactor volume Aan,s = 25 m2/m3), an MFC with two 3-cm tube cathodes (Acat = 27 cm2, Acat,s = 84 m2/m3) generated up to 8.8 W/m3 (403 mW/m2) using glucose [0.8 g/L in a 50 mM phosphate buffer solution (PBS)], which was only slightly less than that produced using a carbon paper cathode with a Pt catalyst (9.9 W/m3, 394 mW/m2; Acat= 7 cm2, Acat,s= 25 m2/m3). Coulombic efficiencies (CEs) with carbon paper anodes were 25-40% with tube cathodes (CoTMPP), compared to 7-19% with a carbon paper cathode. When a high-surface-area graphite brush anode was used (Aan = 2235 cm2, Aan,s = 7700 m2/m3) with two tube cathodes placed inside the reactor (Acat = 27 cm2, Acas, = 93 m2/m3), the MFC produced 17.7 W/m3 with a CE = 70-74% (200 mM PBS). Further increases in the surface area of the tube cathodes to 54 cm2 (120 m2/m3) increased the total power output (from 0.51 to 0.83 mW), but the increase in volume resulted in a constant volumetric power density (approximately 18 W/m3). These results demonstrate that an MFC design using tubular cathodes coated with nonprecious metal catalysts, and brush anodes, is a promising architecture that is intrinsically scalable for creating larger systems. Further increases in power output will be possible through the development of cathodes with lower internal resistances.     

Application of discrete event simulation for robust system design of a melt facility

This paper presents a methodology to identify robust operating regions through the selection of controllable factory variables, using discrete event simulation. A casting plant melt facility was used as an industrial test bed to develop these techniques. A robust system design was determined by response surface analysis of key production parameters. Furthermore, robust operating policies that maximise throughput, while minimizing work-in-progress and thus energy consumption were identified.     

Developing habitat associations for fishes in Lake Winnipeg by linking large scale bathymetric and substrate data with fish telemetry detections

Understanding relationships between freshwater fishes and habitat is critical for effective fisheries and habitat management. Habitat suitability indices (HSI) are commonly used to describe fish–habitat associations in rivers and other freshwater ecosystems. When applied to large lakes however, standard sampling procedures are inadequate because of larger sampling areas and an increased risk of fish collection bias through one-time observations. Here, we use lake bathymetry, substrate, and multiple fish telemetry detections collected from a systematically deployed receiver grid to develop HSI for four fish species (lake sturgeon, freshwater drum, common carp, and walleye) in Lake Winnipeg. Seasonal variations in habitat use based on water depth and substrate were observed in three of four species. Lake sturgeon remained in shallow locations with predominantly gravel substrate near the mouth of the Winnipeg River regardless of season. Freshwater drum persisted over fine substrate in both summer and winter but had a broader depth range in the summer compared to winter. Common carp shifted from mid-range depths and silt substrate in the summer to shallow depths and gravel substrate in the winter. Walleye showed an unchanging association to fine substrate but expanded from primarily mid-range depths in the summer to include shallower depths in the winter. These findings show how multiple telemetry detections per fish can be combined with hydroacoustic data to provide informative habitat associations for fishes in a large lacustrine ecosystem.     

The Changing Role Of The City Centre In Adelaide And Melbourne

It is not too often that sufficient similarities and comparable data enable us to make significant comparisons between the central areas of Australian capital cities. This article presents such material about Adelaide and Melbourne. In particular, it takes advantage of floorspace and employment surveys carried out in these central areas in 1987 and 1992 to identify not only trends but important points of similarity and difference. Some of the more important reasons for these changes are canvassed in the context of current literature. The different policy responses of the two state governments and central city authorities are also examined as there has been a change in both cities to a state Liberal government following Labor governments which have incurred heavy financial losses and increased state debt.     

The investigation of basic processes of rapidly hardening wood-cement-water mixture with CO2

The rapid hardening of wood-cement-water mixture in a carbon dioxide enriched environment was investigated, by studying the development of carbonation degree and monitoring the phase changes in the mixture. The carbonation reaction was a diffusion-controlled process. It occurred very quickly in the first two minutes of reaction. After that, its rate decreased drastically, due to the increasing difficulty of transporting reactants to reaction sites. Jander’s model was found ineffective in predicting the carbonation process. However, its modified version, developed by Kroger and Ziegler, could describe this progress accurately. In addition, the rapid hardening appeared to result mainly from the reactions of calcium silicates in cement with carbon dioxide. The reaction between ettringite and carbon dioxide might also contribute to this rapid hardening process. However, the reaction between calcium hydroxide and carbon dioxide was not confirmed.     

Effect of limestone filler on the deterioration of mortars and pastes exposed to sulfate solutions at ambient temperature

This paper presents data on engineering properties such as compressive strength, visual change and expansion of mortar specimens incorporating limestone filler subjected to severe sulfate attack at ambient temperature. Specimens with four replacement levels of limestone filler (0, 10, 20 and 30% of cement by mass) were immersed in sodium and magnesium sulfate solutions with 33,800 ppm of SO₄²⁻ concentration. In order to identify the products formed by sulfate attack, microstructural analyses such as XRD and SEM were also performed on the paste samples with similar replacement levels of limestone filler.The test results demonstrated that mortar and paste samples incorporating higher replacement levels of limestone filler were more susceptible to sulfate attack irrespective of types of attacking sources. However, the deterioration modes were significantly dependent on the types of sulfate solutions. Additionally, although the samples were exposed to sulfate solutions at 20 ± 1 °C, the deterioration was strongly associated with thaumasite formation in both sulfate solutions.The deterioration mechanism and resistance to sulfate attack of cement matrix incorporating limestone filler at ambient temperature is discussed in the light of the test results obtained.     

The Influence of Phototrophic Biomass on Fe and S Redox Cycling in an Acid Mine Drainage-Impacted System

We examined the effects of organic carbon from oxygenic photosynthetic algal biomass on the redox cycling of Fe and S in an acid mine drainage (AMD)-impacted system. Fe(III)-rich sediments from the field site with abundant algae contained fewer Fe(II) oxidizing bacteria and lower rates of Fe(II) oxidation compared to sediments that did not contain abundant algae. The addition of algal biomass to sediments that did not previously contain abundant algae inhibited microbiological Fe(II) oxidation and enhanced microbiological Fe(III) and sulfate reduction. As Fe(III) reduction proceeded, sulfate was released into solution due to the reductive solubilization of Fe(III) (hydr)oxy-sulfate phases. Our results indicate that in systems where oxidative precipitation of Fe is exploited as an AMD treatment strategy, the abundant organic carbon provided by photosynthetic organisms may inhibit or reverse Fe(II) oxidation.     

Video mediated social interaction between groups: System requirements and technology challenges

This paper discusses results from research related to the use of television as a device that supports social interaction between close-knit groups in settings that include more than two locations, each location being potentially equipped with more than one camera. The paper introduces the notion of a framing experience, as a specific scenario or situation within which social communication takes place. It reports on the evaluation of some of the key attributes of social communication through semi-structured interviews, with 16 families across four European countries. The inferences drawn from this study are reduced to four system capabilities including the ability to support: excitement, engagement and entertainment; high quality, reliable audiovisual communications; flexibility and adaptability sufficient to support the unpredictable and reactive nature of human interaction and discourse. These system requirements are, in turn, reduced to a number of technology challenges which if solved will help enable effective social communications between groups, mediated by the television. These technology challenges include: high quality reliable audio visual communication; interaction orchestration, multimedia interpretation and multimedia composition. Finally the paper reflects on the impact the use of framing experiences, such as those described here, could have on strategy and policy for service providers and regulators.